Water-cement ratio plays a unique role in concrete structures. The uniqueness of evaluating concrete from the perspective of the water-cement ratio will be more obvious if the structure is being assessed down into its microscale level. It is important to realise that most dynamic concrete structures are hydro-related structures, and those structures need to be designed as detail as possible. Thus, the design of dynamic concrete structures has to incorporate accurate fatigue formulation and precise water-cement ratio variation effect. Currently, one of the most simplified yet accurate formulations proposed to run fatigue cases throughout a wide spectrum of scope is the Theory of Critical Distances (TCD). Therefore, the article reviews and discusses the precision of TCD towards the water-cement ratio perspective.
23 February 2022 in Civil and Sustainable Urban Engineering
Petrochemical is a vital pillar industry for the national economic growth wherein the past few years, it has produced a huge amount of petroleum sludge. Petroleum sludge (PS) contains toxic and carcinogenic-mutagenic compounds and heavy metals, which are a major source of pollution in the environment. Thus, it needs to be properly treated and disposed of. Correspondingly, this paper presents a review of the techniques to treat petroleum waste to effectively immobilize the heavy metals and highlights their possible application as construction materials. This review concludes that each treatment method (i.e., solidification, stabilization, incineration, bioremediation, centrifugation, etc.) has its own merits and demerits and may be more suitable for certain applications than others. The use of pyrolysis, solidification, and stabilization techniques has been demonstrated to be potentially beneficial in protecting the environment from contaminants in PS and further recycling PS as cementitious materials. However, the selection of suitable treatment methods has to be made based on the chemical composition of the waste, method capacity, costs, and disposal standards. Therefore, an overall evaluation is required prior to treatment method selection to ensure the safe disposal or recycling of petroleum waste. This review could improve basic knowledge of PS treatment and disposal techniques and serve as a future guide for recycling PS as a building material.
People need durable shelters for living safely due to devastation caused by flooding in some areas, and it is not easy to mitigate the frequency and intensity of the flooding. Therefore, in this research, an industrialized building system (IBS) has been proposed as one of the best solutions. However, most of the existing IBSs were not designed and tested for resisting a sudden horizontal impact. Furthermore, the joints of some IBSs would likely be vulnerable to failure when subjected to a horizontal impact. There is a need to develop a bolt-connected IBS that is able to withstand a horizontal impact load. Thus, this study aimed to investigate the performance of steel-bolt-connected IBS frames subjected to the sudden impact of hydrodynamic force. Autodesk computational fluid dynamic (CFD) simulation was used for optimizing the laboratory experiment. A 1:5-scale IBS frame was designed and tested for the dam-break test using 1 m, 2 m, and 3 m reservoir water levels. The results showed that the bolt connections were very effective and robust in the IBS frame. They also restricted damages from spreading to other structural components due to energy dissipation. The main findings of this study are crucial to improving the current IBS method of construction.
1 May 2023 in Journal of Pipeline Systems Engineering and Practice
Concrete-filled hollow steel (CFHS) has become more popular due to its advantages and benefits compared to reinforced concrete. This paper presents the experimental investigation on the performance of rubberized pozzolanic concrete-filled hollowsteel column (RuPCFHS) under monotonic and cyclic lateral load in comparison to bare hollow steel column and normal concrete-filled hollow steel column (NCFHS). The test parameters included the type of concrete infill and the level of axial load. Modified rubberized pozzolanic concrete with comparable compressive strength to that of normal concrete was used. Two types of axial load conditions: no axial load and 20% axial load were considered in the testing. The test results indicate that the performance of the columns improved when concrete infill was introduced in the hollow steel. The application of axial loading also increased the capacity of the column specimens. RuPCFHS behaved with comparable performance with NCFHS in both monotonic and cyclic testing. RuPCFHS recorded the highest increment in the energy dissipation capability when 20% axial load was applied to the column when compared to the other specimens. The comparable performance indicated the possibility ofRuPC as an infill material of CFHS andRuPCFHS as a structural component.