The dynamic response accuracy of suspension servo actuators directly determines the vibration-reduction performance of active-suspension systems. However, during long-term service, the system is prone to the influence of compound-degradation faults, such as internal leakage and time delay, leading to a significant decline in control performance. To address this issue, this paper proposes a collaborative control framework combining model-free adaptive control with a differential term of tracking error (DE-MFAC) and an improved particle swarm optimization (IPSO) algorithm. Firstly, to overcome the limitations of traditional model-free adaptive control (MFAC), a DE-MFAC strategy is constructed by implicitly handling the time-delay term and introducing the differential term of tracking error and dynamic weight factor into the performance index. Secondly, to enhance the parameter-tuning effect, the traditional particle swarm optimization (PSO) algorithm is improved (IPSO) by incorporating a dynamic inertia weight and an out-of-bounds random reflection mechanism, thereby strengthening the global optimization capability. On this basis, a suspension servo actuator system model incorporating internal leakage and time-delay faults is established based on the co-simulation platform of Simulink and AMESim, and the proposed method is validated. The simulation results show that, compared with the optimized traditional MFAC, the DE-MFAC tuned by IPSO exhibits superior position-tracking accuracy, faster response speed, and stronger overshoot-suppression capability under various compound-fault conditions. Further analysis indicates that the Integral of Absolute Cubic Error (IACE) function, due to its higher sensitivity to large deviations, can more effectively suppress overshoot and is suitable for engineering scenarios with strict requirements on dynamic performance. In addition, the optimization of control parameters using the IPSO algorithm can effectively compensate for the performance degradation caused by degradation faults, providing a feasible technical approach for extending the service life of actuators through adaptive adjustment.
Al-Sc alloys are widely applied in aerospace and automotive lightweighting owing to the excellent performance imparted by nano-sized Al3Sc precipitates. Accurate simulation of the full-cycle precipitation kinetics is critical for optimizing aging heat treatment processes, but the traditional Lifshitz-Slyozov-Wagner (LSW) theory is only applicable to the coarsening stage, while the conventional Kampmann-Wagner-Numerical (KWN) model suffers from severe numerical diffusion and fails to correct errors caused by discontinuous precipitate size distributions. To address these issues, a high-resolution population dynamics model based on the Van Leer limiter was established in this study, which is an improved KWN model that simultaneously considers interfacial energy transition during nucleation and coarsening and the effect of precipitate volume fraction on particle growth rate. Isothermal aging precipitation of Al3Sc in Al-0.2 wt.% Sc and Al-0.3 wt.% Sc alloys at 350 °C was systematically simulated, and key kinetic parameters including nucleation rate, critical nucleation radius, average precipitate radius, and normalized size distribution were calculated. The results show that the simulated average radius and normalized size distribution are in excellent agreement with experimental data, and the model accurately captures the plateau characteristic of average radius evolution during aging. Increasing Sc content significantly shortens the nucleation-growth stage and advances the onset of coarsening by approximately one order of magnitude. Compared with the LSW theory, the proposed model achieves second-order accuracy in smooth regions and suppresses spurious oscillations in discontinuous regions, fully reproducing the incubation, nucleation-growth, and coarsening stages of precipitation. This high-resolution model provides reliable theoretical support for the aging process optimization of Al-Sc alloys and offers an effective numerical method for precipitation kinetics simulation of other dilute binary alloys.