Shaoyuan Zheng

Ms. Shaoyuan Zheng


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 April 2026 in Materials
Verified
Journal Article
Open access
PDF file
ZHZhongshuai Hu
Zhongshuai Hu
YXYuanliang Xiong
Yuanliang Xiong
YCYuchen Cai
Yuchen Cai
SZShaoyuan Zheng
Shaoyuan Zheng
YLYuting Lv
Yuting Lv
LMLiguo Ma
Liguo Ma
This study investigates the synergistic mechanism between composite activators (NaOH and Na2SiO3 blend) and the microstructure–macroperformance relationship of foam concrete, focusing on the influence of different activator dosages on foam concrete stability, compressive strength, and drying shrinkage behavior. Experimental results indicate that excessively high activator dosages impair foam concrete stability, reduce compressive strength, and accelerate drying shrinkage. However, an appropriate amount of composite activator effectively improves the stability of freshly mixed foam concrete, significantly reducing settlement rates. During the hardening stage, it optimizes pore size distribution, promotes the formation of denser hydration products, and enhances the mechanical properties of the pore framework, thereby synergistically improving the mechanical performance of foam concrete.

15 September 2026 in Materials
Verified
Journal Article
Open access
PDF file
ZHZhongshuai Hu
Zhongshuai Hu
PLPing Lyu
Ping Lyu
SZShaoyuan Zheng
Shaoyuan Zheng
CZChunhui Zhang
Chunhui Zhang
LMLiguo Ma
Liguo Ma
Timber structures constitute the primary form of ancient architecture in China and possess immense historical, artistic and scientific value. Having withstood the ravages of time over hundreds or even thousands of years, timber beams—one of the main load-bearing components in such structures—have largely sustained varying degrees of damage and require repair and reinforcement. Superelastic shape memory alloy (SMA) wires offer numerous advantages, including high strength, corrosion resistance, and stable recovery stress via stress-induced martensitic transformation, and are currently widely used in the field of concrete; however, research into their application for reinforcing timber beams remains limited. This study experimentally investigated the flexural performance of diagonally cracked Korean pine beams reinforced with prestressed Ni–Ti SMA wires. The results demonstrate that SMA reinforcement significantly enhances ultimate load-bearing capacity, with prestressing proving substantially more effective than simply increasing the number of wires. The optimal configuration—two SMA wires at 3% prestress—yielded the greatest improvement of 38.02% in ultimate capacity. Additionally, SMA reinforcement improved flexural stiffness, reduced compressive strain under equivalent loads, and lowered the neutral axis position, thereby enlarging the compression zone. These findings confirm that prestressed superelastic SMA wires offer a highly effective solution for strengthening diagonally cracked timber beams in existing structures.

31 August 2026 in Buildings
Verified
Journal Article
Open access
PDF file
QLQian Liu
Qian Liu
PLPing Lyu
Ping Lyu
ZHZhongshuai Hu
Zhongshuai Hu
CZChunhui Zhang
Chunhui Zhang
SZShaoyuan Zheng
Shaoyuan Zheng
LMLiguo Ma
Liguo Ma
Microcracks in concrete are a key factor affecting structural durability, and traditional repair methods struggle to achieve the long-term sealing of deep-seated microcracks. Self-healing bio-concrete, based on the technology of microorganism-induced calcium carbonate precipitation, utilises pre-embedded microbial repair agents to mimic the self-healing mechanisms of living organisms, thereby offering a solution to the problem of microcracks in concrete. However, current research in this field has yet to establish a quantitative framework linking the successive stages from damage perception to functional recovery. To this end, this paper critically reviews the core process-driven mechanisms of this technology, covering the complete chain from damage sensing and triggering, mass transport and microbial metabolism to the formation of mineralisation products and functional recovery. Furthermore, this paper identifies three major bottlenecks: the survival of bacteria in harsh matrix environments, the adverse impact of carriers on mechanical properties, and performance discrepancies between laboratory conditions and on-site conditions. Building on this, this paper further explores key influencing factors such as the selection and cultivation of alkali-tolerant microbial strains, the optimisation of carrier systems, and temperature control. In particular, the paper introduces multi-scale numerical simulation methods to establish coupled convection–diffusion–reaction mass transfer equations within cracks as well as kinetic models for substrate consumption and urease-catalysed microbial processes. These models enable the quantitative prediction of reagent concentration fields, the evolution of supersaturation, and the time required for complete crack sealing whilst taking into account the regulatory role of extracellular polymers. This paper aims to advance research into self-healing bio-concrete from an empirical trial-and-error approach towards predictable, rational design. It also recommends that future efforts should focus on the development of self-sensing and self-adaptive healing systems and on the durability assessment of self-healing bio-concrete under real-world service conditions.

11 September 2026 in Materials
Verified
Journal Article
Open access
PDF file
ZHZhongshuai Hu
Zhongshuai Hu
SZShaoyuan Zheng
Shaoyuan Zheng
PLPing Lyu
Ping Lyu
CZChunhui Zhang
Chunhui Zhang
YLYuting Lv
Yuting Lv
LMLiguo Ma
Liguo Ma
To investigate the corrosion resistance and service life of water-based epoxy-coated reinforcing bars under severe environmental conditions, HRB400 ribbed reinforcing bars were used as the substrate. Four types of water-based epoxy-coated reinforcing bars were prepared, containing 0.3% graphene–polyaniline (PAG), 0.3% iron oxide, 10% zinc phosphate, and 10% zinc–iron powder, respectively, with a bare reinforcing bar control group also included. In accordance with standards such as the ‘Design Standard for Durability of Concrete Structures’, durability tests were conducted under various conditions, including long-term immersion in marine chloride solutions, wet–dry cycling, de-icing salt freeze–thaw cycles, baking and immersion in saline soil, and concrete mixed with seawater. Corrosion current density (Icorr) was monitored using a three-electrode system and the linear polarisation method, and service life was predicted based on the Wiener process. The results indicate that, under all severe environmental conditions, the corrosion current density of the coated reinforcing bars was significantly lower than that of the bare reinforcing bars (BRBs). After 70 cycles of marine wet–dry cycling, the corrosion current density of the bare reinforcing bars reached 0.4569 μA·cm−2, whilst that of the 0.3% PAG coating was 0.1103 μA·cm−2, substantially lower than that of the bare bars (0.4569 μA·cm−2); after 110 freeze–thaw cycles in a de-icing salt environment, the corrosion current density of the bare reinforcing bars was 0.4480 μA·cm−2, whilst that of the PAG-coated bars was 0.1003 μA·cm−2. After 80 cycles of baking and immersion in a saline soil environment, the corrosion current density of the graphene–polyaniline-coated steel increased from 4.97 × 10−3 μA·cm−2 to 0.1021 μA·cm−2 (approximately a 20-fold increase), whilst that of the bare steel rose to 0.4489 μA·cm−2. In concrete mixed with seawater, the corrosion current density of bare reinforcing bars reached as high as 8.60 μA·cm−2 after 120 days, whereas that of coated reinforcing bars was 0.24 μA·cm−2, markedly lower than 8.60 μA·cm−2 for the bare bars. Lifespan predictions indicate that, provided that the specifications for concrete strength and protective layer thickness are met, water-based epoxy coatings have the potential to delay the onset of severe corrosion (Icorr ≥ 1 μA·cm−2) beyond the 50-year design threshold in seawater wet–dry cycling zones and saline soil environments, and are projected to meet the 100-year design requirements in de-icing salt environments. It should be noted that these projections are based on accelerated tests and require validation through long-term field performance data. Graphene-containing polyaniline nanocomposite coatings exhibited the best overall protective performance, whilst zinc phosphate coatings demonstrated outstanding stability in high-chloride environments. For the specific formulations tested in this study, the enhanced corrosion resistance is attributed to the synergistic combination of the epoxy matrix, inorganic fillers (TiO2 and BaSO4) and functional additives; these components collectively provide physical shielding, chemical passivation and dynamic pore-blocking effects. Within the scope of this study, the nanocomposite coating containing 0.3 per cent PAG exhibited the best overall protective performance.