This paper explores the development of 3D-printed self-sensing Ultra-High Performance Concrete (UHPC) by incorporating graphite (G) powder, milled carbon microfiber (MCMF), and chopped carbon microfiber (CCMF) as additives into the UHPC matrix to enhance piezoresistive properties while maintaining workability for 3D printing. Percolation curves were established to identify optimal filler inclusion levels, and a series of compressive tests, including quasi-static cyclic, dynamic cyclic, and monotonic compressive loading, were conducted to evaluate the piezoresistive and mechanical performance of 29 different mix designs. It was found that incorporating G powder improved the conductivity of the UHPC but decreased compressive strength for both mold-cast and 3D-printed specimens. However, incorporating either MCMF or CCMF into the UHPC resulted in the maximum 9.8% and 19.2% increase in compressive strength and Young’s modulus, respectively, compared to the plain UHPC. The hybrid combination of MCMF and CCMF showed particularly effective in enhancing sensing performance, achieving strain linearity over 600 . The best-preforming specimens (3G250M250CCMF) were fabricated using 3 wt% of G, 0.25 wt% of MCMF, and 0.25 wt% of CCMF, yielding a maximum strain gauge factor of 540, a resolution of 68 , and an accuracy of 4.5 under axial compression. The 3D-printed version of the best-performing specimens exhibited slightly diminished piezoresistive and mechanical behaviors compared to their mold-cast counterparts, yielding a maximum strain gauge factor of 410, a resolution of 99 , and an accuracy of 8.6 .
With the depletion of river sand and the rapid expansion of marine infrastructure, seawater–sea-sand concrete (SSC) has attracted increasing attention due to its low cost and sustainability. However, the high chloride content in SSC accelerates steel corrosion. This significantly limits its use in conventional reinforced concrete structures. In recent years, the rise in FRP–steel composite confinement has offered a new solution to this durability bottleneck. Based on this background, scholars have proposed a new type of FRP–steel composite tube confined seawater–sea-sand concrete (FCTSSC) column. This paper reviews the research progress on SSC, CFST, FCFST, and FCTSSC. The latter systems are developed based on the former. The results show that advanced FCTSSC columns exhibit strong synergistic confinement between the FRP and the steel tube when compared with CFST and FCFST. This synergy enhances the bearing capacity, ductility, and post-peak behavior of SSC. Both external and internal FRP configurations can reduce the brittleness and expansion of SSC. They also effectively restrain local buckling of the steel tube. Existing studies mainly focus on short columns. Research on intermediate slender and slender columns remains limited. This includes structural behavior, rational design models, and long-term durability. Finally, future research directions are proposed to support the practical application of FCTSSC in marine engineering.
22 January 2026 in Journal of Building Engineering
Ancient town tourism has become an important component of cultural tourism in China. However, rapid tourism growth has intensified differences in the use of public spaces between residents and tourists, leading to increasing spatial tensions in historic urban areas. This study evaluates public building spaces in ancient towns from the perspectives of residents and tourists and identifies their differentiated needs. Three representative ancient towns in Fujian Province, China, with different tourism resource types and development characteristics, were selected as case studies. The IPA–KANO approach was used to examine differences in user perceptions and priority needs. Based on a literature review, an evaluation system was developed with three dimensions: traditional style, sensory experience, and supporting facilities. The results reveal clear resident–tourist differences in public space priorities and show that these differences vary across ancient towns with different tourism development contexts. Residents place greater emphasis on the maintenance of the environment and facilities and on everyday usability, whereas tourists are more sensitive to public toilet settings and sun and rain shelter facilities. These findings indicate that resident–tourist divergence is context dependent rather than fixed and provide a basis for differentiated spatial optimization and sustainable management.
22 July 2026 in Construction and Building Materials