Jianqiang Shan

Prof. Dr. Jianqiang Shan


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 September 2018 in Science and Technology of Nuclear Installations
Verified
Journal Article
Open access
PWPan Wu
Pan Wu
CGChuntian Gao
Chuntian Gao
JSJianqiang Shan
Jianqiang Shan
Supercritical CO2 Brayton cycle is a good choice of thermal-to-electric energy conversion system, which owns a high cycle efficiency and a compact cycle configuration. It can be used in many power-generation applications, such as nuclear power, concentrated solar thermal, fossil fuel boilers, and shipboard propulsion system. Transient analysis code for Supercritical CO2 Brayton cycle is a necessity in the areas of transient analyses, control strategy study, and accident analyses. In this paper, a transient analysis code SCTRAN/CO2 is developed for Supercritical CO2 Brayton Loop based on a homogenous model. Heat conduction model, point neutron power model (which is developed for nuclear power application), turbomachinery model for gas turbine, compressor and shaft model, and PCHE type recuperator model are all included in this transient analysis code. The initial verifications were performed for components and constitutive models like heat transfer model, friction model, and compressor model. The verification of integrated system transient was also conducted through making comparison with experiment data of SCO2EP of KAIST. The comparison results show that SCTRAN/CO2 owns the ability to simulate transient process for S-CO2 Brayton cycle. SCTRAN/CO2 will become an important tool for further study of Supercritical CO2 Bryton cycle-based nuclear reactor concepts.

1 April 2022 in Energies
Verified
Journal Article
Open access
PDF file
GLGe Li
Ge Li
LHLee Hakey
Lee Hakey
XTXiaoyan Tian
Xiaoyan Tian
ZOZeyu Ouyang
Zeyu Ouyang
XKXiaoya Kang
Xiaoya Kang
XJXinbiao Jiang
Xinbiao Jiang
Heat-pipe-cooled microreactors (HPMR) use a passive high-temperature alkali metal heat pipe to directly transfer the heat of solid core to the hot end of the intermediate heat exchanger or thermoelectric conversion device, thus avoiding a single point failure. To analyze and evaluate the transient safety characteristics of an HPMR system under accident conditions, such as heat pipe failure in the core or a loss of system heat sink and other accidents, a previously developed model for transient analysis of a heat-pipe-cooled space nuclear reactor power system (HPSR) was improved and validated in this study. The models improved mainly comprise: (1) An entire 2-D solid-core heat transfer model is established to analyze the accident conditions of core heat pipe failure and system heat sink loss. In this model, radial and axial Fourier heat conduction equations are used to divide the core into r-θ direction control volumes. The physical parameters of the material in the control volume are calculated according to the volume-weighted average. (2) By coupling the heat transfer limit model and the two-dimensional thermal resistance network model, the transient model of a heat pipe for HPMR system analysis is improved. (3) Conversion system models are established to simulate the system characteristics of the advanced HPMR concept, such as thermoelectric conversion, Stirling conversion, and the open Brayton conversion analysis model. Based on the improved models, the HPMR system analysis program TAPIRSD was developed, which was verified by experimental data of the separated conversion components and the ground nuclear test device KRUSTY. The maximum deviation of the power output predicted by the energy conversion model is less than 8%. The accident conditions of the KRUSTY tests, such as load change, core heat pipe failure, and heat sink loss accident, were studied by using TAPIRSD. The results show that the simulation results of the TAPIRSD code agree well with the experimental data of the KRUSTY prototype reactor. The maximum error between the TAPIRSD code prediction and the measured value of the core temperature under accident conditions is less than 10 K, and the maximum deviation is less than 2%. The results show that the developed code can predict the transient response process of the HPMR system well. At the same time, the accuracy and reliability of the improved model are proved. The TAPIRSD is suitable for system transient analysis of different types of HPMRs and provides an optional tool for the system safety characteristics analysis of HPMR.

27 January 2022 in Energies
Verified
Journal Article
Open access
PDF file
HLHuaqi Li
Huaqi Li
XTXiaoyan Tian
Xiaoyan Tian
LHLee Hakey
Lee Hakey
XKXiaoya Kang
Xiaoya Kang
LZLei Zhu
Lei Zhu
JSJianqiang Shan
Jianqiang Shan
Space nuclear reactor power system (SNRPS) is a priority technical solution to meet the future space power requirement of high-power, low-mass, and long-life. The thermoelectric conversion subsystem is the key component of SNRPS, which greatly affects the performance, quality, and volume of SNRPS. Among all kinds of proposed thermoelectric conversion technologies, the free-piston Stirling power converter (FPSPC) has become a preferred conversion technology for small-scale advanced SNPRS due to its moderate waste heat emission temperature and high conversion efficiency, mainly composed of a linear alternator and free-piston Stirling engine (FPSE). For studying the performance of FPSPC, a quasi-steady flow thermodynamic cycle analysis model considering parasitic heat losses has been developed for FPSE. And then the performance analysis model for FPSPC has been established by coupling the thermodynamic cycle analysis model with the mechanical motion model of the piston and volt-ampere characteristic model of the linear alternator. Furthermore, the analysis model was compared and validated by the GPU-3 Stirling engine’s experimental data. The performance parameters of Component Test Power Converter (CTPT) FPSPC designed by NASA for SNRPS were also analyzed. The results show that the amplitudes position of CTPC displacer and piston are 15.1 mm and 11.2 mm, respectively. The corresponding average electric power output of CTPC is 17.316 kW. The input thermal power to the CTPT heater is 66.1 kW, leading to the converter efficiency of 26.2%. The average current and voltage of the CTPC alternator are 86.38 A and 193.15 V, respectively. Among all kinds of parasitic energy losses, the regenerator heat loss accounts for the largest proportion, with an average of about 12.7 kW. The effects of cooler and heater temperature on the performance of CTPC FPSPC were also studied.

24 January 2020 in Science and Technology of Nuclear Installations
Verified
Journal Article
Open access
PWPan Wu
Pan Wu
CGChuntian Gao
Chuntian Gao
YHYanping Huang
Yanping Huang
DZDan Zhang
Dan Zhang
JSJianqiang Shan
Jianqiang Shan
Coupling supercritical carbon dioxide (S-CO2) Brayton cycle with Gen-IV reactor concepts could bring advantages of high compactness and efficiency. This study aims to design proper simple and recompression S-CO2 Brayton cycles working as the indirect cooling system for a mediate-temperature lead fast reactor and quantify the Brayton cycle performance with different heat rejection temperatures (from 32°C to 55°C) to investigate its potential use in different scenarios, like arid desert areas or areas with abundant water supply. High-efficiency S-CO2 Brayton cycle could offset the power conversion efficiency decrease caused by low core outlet temperature (which is 480°C in this study) and high compressor inlet temperature (which varies from 32°C to 55°C in this study). A thermodynamic analysis solver is developed to provide the analysis tool. The solver includes turbomachinery models for compressor and turbine and heat exchanger models for recuperator and precooler. The optimal design of simple Brayton cycle and recompression Brayton cycle for the lead fast reactor under water-cooled and dry-cooled conditions are carried out with consideration of recuperator temperature difference constraints and cycle efficiency. Optimal cycle efficiencies of 40.48% and 35.9% can be achieved for the recompression Brayton cycle and simple Brayton cycle under water-cooled condition. Optimal cycle efficiencies of 34.36% and 32.6% can be achieved for the recompression Brayton cycle and simple Brayton cycle under dry-cooled condition (compressor inlet temperature equals to 55°C). Increasing the dry cooling flow rate will be helpful to decrease the compressor inlet temperature. Every 5°C decrease in the compressor inlet temperature will bring 1.2% cycle efficiency increase for the recompression Brayton cycle and 0.7% cycle efficiency increase for the simple Brayton cycle. Helpful conclusions and advises are proposed for designing the Brayton cycle for mediate-temperature nuclear applications in this paper.

29 November 2017 in Science and Technology of Nuclear Installations
Verified
Journal Article
Open access
PDF file
PWPan Wu
Pan Wu
FCFei Chao
Fei Chao
DWDan Wu
Dan Wu
JSJianqiang Shan
Jianqiang Shan
JGJunli Gou
Junli Gou
As compared to the two-fluid single-pressure model, the two-fluid seven-equation two-pressure model has been proved to be unconditionally well-posed in all situations, thus existing with a wide range of industrial applications. The classical 1st-order upwind scheme is widely used in existing nuclear system analysis codes such as RELAP5, CATHARE, and TRACE. However, the 1st-order upwind scheme possesses issues of serious numerical diffusion and high truncation error, thus giving rise to the challenge of accurately modeling many nuclear thermal-hydraulics problems such as long term transients. In this paper, a semi-implicit algorithm based on the finite volume method with staggered grids is developed to solve such advanced well-posed two-pressure model. To overcome the challenge from 1st-order upwind scheme, eight high-resolution total variation diminishing (TVD) schemes are implemented in such algorithm to improve spatial accuracy. Then the semi-implicit algorithm with high-resolution TVD schemes is validated on the water faucet test. The numerical results show that the high-resolution semi-implicit algorithm is robust in solving the two-pressure two-fluid two-phase flow model; Superbee scheme and Koren scheme give two highest levels of accuracy while Minmod scheme is the worst one among the eight TVD schemes.

14 March 2017 in Annals of Nuclear Energy
Verified
Journal Article
Closed access
JGJunli Gou
Junli Gou
HMHaifu Ma
Haifu Ma
ZYZijiang Yang
Zijiang Yang
JSJianqiang Shan
Jianqiang Shan