The acute problem of eutrophication increasing in the environment is due to the increase of industrial wastewater, synthetic nitrogen, urine, and urea. This pollutes groundwater, soil and creates a danger to aquatic life. Therefore, it is advantageous to use these waste materials in the form of urea as fuel to generate power using Microbial Fuel Cell (MFC). In this work, we studied the compost soil MFC(CSMFC) unlike typical MFC with urea from the compost as fuel and graphite as a functional electrode. The electrochemical techniques such as Cyclic Voltammetry, Chronoamperometry are used to characterise CSMFC. It is observed that the CSMFC in which the compost consists of urea concertation of 0.5 g/ml produces maximum power. Moreover, IV measurement is carried out using polarization curves in order to study its sustainability and scalability. Bacterial studies were also playing a significant role in power generation. The sustainability study revealed that urea is consumed in CSMFC to generate power. This study confirmed that urea has a profound effect on the power generation from the CSMFC. Our focus is to get power from the soil processes in future by using waste like urine, industrial wastewater, which contains much amount of urea.

Memristive systems can provide a novel strategy to conquer the von Neumann bottleneck by evaluating information where data are located in situ. To meet the rising of artificial neural network (ANN) demand, the implementation of memristor arrays capable of performing matrix multiplication requires highly reproducible devices with low variability and high reliability. Hence, we present an Ag/CuO/SiO₂/p-Si heterostructure device that exhibits both resistive switching (RS) and negative differential resistance (NDR). The memristor device was fabricated on p-Si and Indium Tin Oxide (ITO) substrates via cost-effective ultra-spray pyrolysis (USP) method. The quality of CuO nanoparticles was recognized by studying Raman spectroscopy. The topology information was obtained by scanning electron microscopy. The resistive switching and negative differential resistance were measured from current–voltage characteristics. The results were then compared with the Ag/CuO/ITO device to understand the role of native oxide. The interface barrier and traps associated with the defects in the native silicon oxide limited the current in the negative cycle. The barrier confined the filament rupture and reduced the reset variability. Reset was primarily influenced by the filament rupture and detrapping in the native oxide that facilitated smooth reset and NDR in the device. The resistive switching originated from traps in the localized states of amorphous CuO. The set process was mainly dominated by the trap-controlled space-charge-limited; this led to a transition into a Poole–Frenkel conduction. This research opens up new possibilities to improve the switching parameters and promote the application of RS along with NDR.

Rapid urbanization in developing countries poses challenges such as rising crime rates and resource scarcity. Unmanned Aircraft Systems (UAS) offer a promising solution to enhance public safety, but their integration requires addressing specific challenges. This study employs the Systems-Theoretic Accident Model and Processes (STAMP) and System-Theoretic Process Analysis (STPA) methodologies to identify potential hazards and requirements for integrating UAS into public safety systems in urban environments. The research objectives include identifying hazards and challenges, developing safety requirements and guidelines, and proposing strategies for efficient infrastructure investment. The proposed framework, based on STAMP/STPA, includes additional steps to consider early-stage systems and maintain stakeholder traceability. A risk matrix approach is utilized to prioritize risk mitigation measures for cost-effectiveness. The findings of this study provide valuable insights for policymakers and urban planners in developing countries seeking to harness the potential of UAS technology for enhancing public safety while addressing the unique challenges posed by rapid urbanization.

Layered double hydroxides (LDHs) have gained vast importance as an electrocatalyst for water electrolysis to produce carbon-neutral and clean hydrogen energy. In this work, we demonstrated the fabrication of nano-flake-like NiMn LDH thin film electrodes onto porous membrane-like Ni-foam by using a simple and cost-effective electrodeposition method for oxygen evolution reaction (OER). Various Ni_1-xMn_x LDH (where x = 0.15, 0.25, 0.35, 0.50 and 0.75) thin film electrodes are utilized to achieve the optimal catalyst for an efficient and sustainable OER process. The various composition-dependent surface morphologies and porous-membrane-like structure provided the high electrochemical surface area along with abundant active sites facilitating the OER. The optimized catalyst referred to as Ni_0.65Mn_0.35 showed excellent OER properties with an ultralow overpotential of 253 mV at a current density of 50 mAcm⁻², which outperforms other state-of-the art catalysts reported in the literature. The relatively low Tafel slope of 130 mV dec⁻¹ indicates faster and more favorable reaction kinetics for OER. Moreover, Ni_0.65Mn_0.35 exhibits excellent durability over continuous operation of 20 h, indicating the great sustainability of the catalyst in an alkaline medium. This study provides knowledge for the fabrication and optimization of the OER catalyst electrode for water electrolysis.

$P$ -type bulk InP was prepared by the liquid encapsulated Czochralski method and subsequently diffused with Mn by heat treatment after the evaporation of Mn on top of InP:Zn using a molecular beam epitaxy system. The characteristics of Mn-diffused InMnP:Zn were investigated by an energy dispersive x-ray spectroscopy, photoluminescence, and a superconducting quantum interference device magnetometer measurements. The samples were characterized by transmission electron microscopy and no evidence of secondary phase formation of InMnP:Zn was found. The results of energy dispersive x-ray peak displayed injected concentration of Mn near 3%. The results of photoluminescence measurement showed that optical broad transitions related to Mn appeared around $1.2\mathrm{eV}$ and it was confirmed that the transitions around $1.2\mathrm{eV}$ were Mn-related band by the diffusion of Mn into InP:Zn. Clear ferromagnetic hysteresis loops were observed at 10 and $300\mathrm{K}$ and the temperature-dependent magnetization showed ferromagnetic behavior around $300\mathrm{K}$ , which is caused by carrier-mediated ferromagnetism in InMnP:Zn. It is found that a ferromagnetic semiconductor at room temperature can be formed in diluted magnetic semiconductor based on GaMnN and InMnP additionally co-doped with Mg and Zn, respectively.

Microbial fuel cells (CS-UFC) utilize waste resources containing biodegradable materials that play an essential role in green energy. MFC technology generates “carbon-neutral” bioelectricity and involves a multidisciplinary approach to microbiology. MFCs will play an important role in the harvesting of “green electricity.” In this study, a single-chamber urea fuel cell is fabricated that uses these different wastewaters as fuel to generate power. Soil has been used to generate electrical power in microbial fuel cells and exhibited several potential applications to optimize the device; the urea fuel concentration is varied from 0.1 to 0.5 g/mL in a single-chamber compost soil urea fuel cell (CS-UFC). The proposed CS-UFC has a high power density and is suitable for cleaning chemical waste, such as urea, as it generates power by consuming urea-rich waste as fuel. The CS-UFC generates 12 times higher power than conventional fuel cells and exhibits size-dependent behavior. The power generation increases with a shift from the coin cell toward the bulk size. The power density of the CS-UFC is 55.26 mW/m². This result confirmed that urea fuel significantly affects the power generation of single-chamber CS-UFC. This study aimed to reveal the effect of soil properties on the generated electric power from soil processes using waste, such as urea, urine, and industrial-rich wastewater as fuel. The proposed system is suitable for cleaning chemical waste; moreover, the proposed CS-UFC is a novel, sustainable, cheap, and eco-friendly design system for soil-based bulk-type design for large-scale urea fuel cell applications.