Alfonso Trejo-Enriquez

Dr. Alfonso Trejo-Enriquez

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 April 2024 in Prosthesis
Verified
Journal Article
Open access
PDF file
JPJesus Alejandro Serrato Pedrosa
Jesus Alejandro Serrato Pedrosa
GUGuillermo Urriolagoitia-Sosa
Guillermo Urriolagoitia-Sosa
BRBeatriz Romero-Angeles
Beatriz Romero-Angeles
FCFrancisco Carrasco-Hernández
Francisco Carrasco-Hernández
Francisco Gallegos-FunesFrancisco Gallegos-Funes
Francisco Gallegos-Funes
GUGuillermo Manuel Urriolagoitia-Calderon
Guillermo Manuel Urriolagoitia-Calderon
The study of the phenomena occurring in the plantar region is remarkably intriguing, especially when performing a normal gait cycle where the foot is under loading conditions. The effects presented in the foot while walking provide relevant indicators regarding clinical means for enhancing regular performance or rehabilitation therapies. Nevertheless, more than traditional methods are needed to biomechanically evaluate foot structural conditions, leading to an incomplete database for determining the patient’s needs so that advanced methodologies provide detailed medical assessment. Therefore, it is necessary to employ technological engineering tools to optimize biomechanical plantar pressure evaluations to reach suitable personalized treatments. This research initially evaluated numerically the pressure points in the foot sole region in each one of the five stance phases in a normal gait cycle. Medical imaging techniques were utilized to construct an anatomically accurate biomodel of the soft tissues of the right foot. The Finite Element Method was employed to predict peak plantar pressure in barefoot conditions for all stance phases; results from this case study presented a close alignment with gait experimental testing implemented to analyze the feasibility and validation of all mechanical considerations for the numerical analyses. Hence, having a solid foundation in the biomechanical behavior from the first case study close estimates, a 3D-printable patient-specific insole was designed and numerically analyzed to observe the mechanical response in the plantar critical zones utilizing a personalized orthotic device. Results from the second case study notably demonstrated a crucial decrement in excessive pressure values. Employing morphological customization orthopedics modeling combined with 3D-printable materials is revolutionizing assistive device design and fabrication techniques. The fundamental contribution of this research relies on deepening the knowledge of foot biomechanics from an interdisciplinary approach by numerically analyzing pressure distribution in critical regions for all five stances phases; thus, based on the methods employed, the results obtained contribute to the advances of patient-specific foot orthopedics.

29 April 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
DHDavid Sánchez Hernández
David Sánchez Hernández
GUGuillermo Urriolagoitia-Sosa
Guillermo Urriolagoitia-Sosa
Gerardo Reyes-RuizGerardo Reyes-Ruiz
Gerardo Reyes-Ruiz
BRBeatriz Romero-Angeles
Beatriz Romero-Angeles
JOJulián Patiño Ortiz
Julián Patiño Ortiz
MOMiguel Patiño Ortiz
Miguel Patiño Ortiz
The rapid proliferation of unmanned aerial vehicles (UAVs) in urban and peri-urban environments has increased concern regarding drone-generated acoustic emissions, particularly in multirotor platforms whose tonal and broadband noise is strongly influenced by propeller blade geometry. This study presents a CFD-based aeroacoustic assessment framework to examine the influence of key geometric modifications on the acoustic signature of a representative multirotor propeller while preserving aerodynamic performance. A baseline quadrotor propeller was analyzed using Reynolds-Averaged Navier–Stokes (RANS) simulations coupled with the Ffowcs Williams–Hawkings (FW-H) acoustic analogy and Brooks–Pope–Marcolini (BPM) broadband noise estimation. The blade geometry was parameterized in terms of leading-edge sweep, tip chord, blade twist, and trailing-edge serration features, and representative low-noise configurations were evaluated under operating conditions ranging from 3000 to 6000 RPM and advance ratios between 0 and 0.3. The results indicate that combined swept-serrated geometries provide the most favorable noise–performance trade-off, with a predicted reduction of up to 4.8 dB(A) relative to the baseline at the design condition, while maintaining thrust and figure of merit within practical engineering margins. The proposed framework provides a transferable computational basis for the systematic design of low-noise propellers for surveillance UAVs, commercial multirotors, and emerging urban air mobility applications.

29 April 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
DHDavid Sánchez Hernández
David Sánchez Hernández
GUGuillermo Urriolagoitia-Sosa
Guillermo Urriolagoitia-Sosa
Gerardo Reyes-RuizGerardo Reyes-Ruiz
Gerardo Reyes-Ruiz
BRBeatriz Romero-Angeles
Beatriz Romero-Angeles
JOJulián Patiño Ortiz
Julián Patiño Ortiz
MOMiguel Patiño Ortiz
Miguel Patiño Ortiz
Small unmanned aerial vehicle (UAV) acoustic signatures have become increas-ingly relevant not only from the perspective of environmental noise mitigation, but also for detectability, surveillance vulnerability, and low-observable aerial system design. While most prior studies focus on rotor-noise reduction through high-fidelity computa-tional fluid dynamics (CFD) or experimental testing, comparatively fewer studies ad-dress reduced-order computational frameworks capable of rapidly predicting both acoustic signatures and detection distances under varying operating conditions. This study presents a physics-informed reduced-order computational aeroacoustic framework integrating blade passing frequency harmonic modeling, aeroacoustic scaling laws, atmospheric propagation, and beamforming-informed detectability metrics for rapid prediction of small UAV acoustic signatures. The methodology combines harmonic spectral synthesis, rotational speed scaling, source propagation modeling, and sig-nal-to-noise-based detection criteria to estimate sound pressure spectra, directional acoustic signatures, and acoustic detection distance envelopes. Computational results indicate strong agreement with trends reported in published UAV aeroacoustic ex-periments and suggest that propeller operating speed dominates both acoustic signature growth and detectability range. For representative multirotor conditions, modeled detection distances vary from approximately 80 m to over 200 m depending on rotational speed and ambient noise floor, while reduced source signature scenarios can reduce detectability by up to 30%. The proposed framework provides a computationally efficient tool for rapid aeroacoustic assessment, acoustic signature management, and preliminary low-observable UAV design.

19 July 2024
Verified
Book Chapter
Closed access
PDF file
YRYonatan Yael Rojas-Castrejon
Yonatan Yael Rojas-Castrejon
GUGuillermo Urriolagoitia-Sosa
Guillermo Urriolagoitia-Sosa
ÁRÁngeles Beatriz Romero
Ángeles Beatriz Romero
ATAlfonso Trejo-Enriquez
Alfonso Trejo-Enriquez
MCMartin Ivan Correa-Corona
Martin Ivan Correa-Corona
GUGuillermo Manuel Urriolagoitia-Calderón
Guillermo Manuel Urriolagoitia-Calderón

15 August 2026 in Computation
Verified
Journal Article
Open access
PDF file
DHDavid Sánchez Hernández
David Sánchez Hernández
GUGuillermo Urriolagoitia-Sosa
Guillermo Urriolagoitia-Sosa
Gerardo Reyes-RuizGerardo Reyes-Ruiz
Gerardo Reyes-Ruiz
BRBeatriz Romero-Angeles
Beatriz Romero-Angeles
JMJacobo Martinez-Reyes
Jacobo Martinez-Reyes
JNJorge Alberto Gomez Niebla
Jorge Alberto Gomez Niebla
Small unmanned aerial vehicle (UAV) acoustic signatures are relevant to environmental noise assessment, passive monitoring, and preliminary detectability analysis. This study presents a physics-informed reduced-order framework that combines blade-passing frequency (BPF) harmonic synthesis, rotational-speed acoustic scaling, propagation, and signal-to-noise ratio (SNR) threshold crossing. The RPM–OASPL law was calibrated using ten digitized measurements for a four-rotor DJI Phantom II with Original 9450 propellers and validated, without refitting, against eleven Aftermarket 9443 measurements. The fitted exponent was m = 5.285, and the fitted reference level was Lref = 77.01 dB(A) at 5000 RPM and 1 m. A 100,000-realization Monte Carlo analysis that propagated ±100 RPM and ±0.5 dB digitization bounds, together with residual scatter, produced total 95% intervals of 5.01–5.55 for m and 76.58–77.43 dB(A) for Lref. Calibration yielded RMSE = 0.39 dB and R2 = 0.9979; independent-configuration validation yielded MAE = 2.27 dB, RMSE = 2.38 dB, and R2 = 0.9168. At 5000 RPM, nominal free-field threshold-crossing distances were 70.9, 22.4, and 7.1 m for quiet rural, semi-urban, and urban scenarios. Combined statistical 95% screening intervals were 41.3–121.7, 13.0–38.5, and 4.1–12.2 m, respectively. Sensitivity analyses show that β controls harmonic-specific range but not normalized OASPL, while ground interference, band-limited masking, and detector processing can materially change operational range. The framework is therefore a rapid, interpretable screening tool rather than a universal detector performance model.

1 August 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
YRYonatan Yael Rojas-Castrejon
Yonatan Yael Rojas-Castrejon
GUGuillermo Urriolagoitia-Sosa
Guillermo Urriolagoitia-Sosa
BRBeatriz Romero-Angeles
Beatriz Romero-Angeles
ATAlfonso Trejo-Enriquez
Alfonso Trejo-Enriquez
EGEdder Jair Rodriguez Granados
Edder Jair Rodriguez Granados
GUGuillermo Manuel Urriolagoitia-Calderon
Guillermo Manuel Urriolagoitia-Calderon
The main topic of this research work is essentially about what can happen to the spine when subjected to an axial load and the damage caused when the mechanical load capacity of the intervertebral discs is exceeded, giving the focus to the analysis by introducing it in the context of sports, in this case, weight lifting. The approach focuses on biomechanics, specifically how a weight affects the biological structure during a free squat. This common weightlifting exercise involves lowering the body into a seated position and then standing back up, with an Olympic bar supported on the T1 vertebra, with the purpose of creating an approach to understanding how the spine and intervertebral discs are directly affected. For this, a methodology is presented through which the model is obtained, its validation and the application of analysis through numerical simulation. Subsequently, the behaviour of the spinal column under pressure at different levels of force is observed and qualified. Various configurations of the spine were analysed, including the distribution of forces in the intervertebral discs and adjacent joints, using a 3D biomodel subjected to analysis in the finite element software ANSYS. The results show the effect that excessive forces can cause, giving way to injuries with a significant increase in pressure on the intervertebral discs, but mainly allowing the identification of critical areas where disc herniations can originate. This numerical simulation study seeks to prevent harmful conditions in the field of fitness by providing relevant information on possible spinal column injuries in loading scenarios, which could help in a better understanding and diagnosis of unexpected injuries.