The growing demand for therapeutic monoclonal antibodies (mAbs) has heightened the need for efficient and scalable purification strategies. A major challenge in downstream processing is the removal of antibody aggregates, which can compromise drug safety, efficacy, and regulatory compliance. This review explores the use of multimodal chromatography for aggregate separation, providing an in-depth analysis of commercially available resins and emerging adsorbent prototypes. It also examines the mechanisms of aggregate formation during bioprocessing. A comparative evaluation of conventional single-mode chromatography techniques—affinity, ion exchange, and hydrophobic interaction—is presented alongside multimodal chromatography, which integrates ion-exchange, hydrophobic, and other non-covalent interactions for enhanced aggregate clearance and process flexibility. The review primarily assesses commercial multimodal resins in terms of aggregate removal efficiency, binding capacity, and scalability. Additionally, advancements in prototype resins and multimodal membranes are discussed. Finally, the advantages, limitations, and future directions of multimodal chromatography in mAb aggregate removal are outlined. As purification demands continue to evolve, multimodal chromatography is poised to play an increasingly critical role in achieving the high purity standards required for therapeutic antibodies.
Efficient protein aggregate removal remains a major challenge in downstream bioprocessing because high aggregate clearance must be achieved without compromising monomer yield. Mixed-mode chromatography (MMC) has emerged as a promising approach, offering enhanced selectivity through combined ionic and hydrophobic interactions and salt-tolerant behavior. However, the relative roles of matrix pore accessibility and ligand density remain insufficiently understood. In this study, MMC adsorbents based on 4% and 6% agarose matrices were functionalized with a BMEA ligand. Inverse size-exclusion chromatography revealed that functionalization caused matrix syneresis, increasing dry matter content to 23% and enhancing mechanical rigidity. MMC-Ag4, with a larger mean pore radius (19.1 nm), exhibited a selectivity factor of 2 toward aggregates in static binding experiments, whereas the denser MMC-Ag6 (15.7 nm) showed no selectivity. In column studies using a feed containing 10% aggregates, MMC-Ag4 outperformed the commercial benchmark Capto Adhere, achieving monomer yields of 80–90% at 97–98% purity with salt tolerance up to 300 mM NaCl. These findings indicate that while MMC-Ag6 is limited by pore blockage, the optimized pore accessibility of MMC-Ag4 enables effective aggregate recognition. In conclusion, multimodal adsorbent design must balance ligand density with matrix porosity to ensure high resolution and yield in aggregate removal.