Gaowei Xu

Dr. Gaowei Xu

orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 September 2017 in Scientific Reports
Verified
Journal Article
Open access
PDF file
GCGong Cheng
Gong Cheng
HLHeng Li
Heng Li
GXGaowei Xu
Gaowei Xu
WGWei Gai
Wei Gai
LLLe Luo
Le Luo
Nanotwinned copper (nt-Cu) shows a broad application prospects as interconnection materials in integrated circuit industry, since it combines the excellent mechanical and electrical properties. However, the formation and growth behavior of twin lamellae in pulse electrodeposited copper films are not fully understood. In this work, a series of electroplated copper films are prepared by verifying the electroplating parameters and the microstructures are analyzed using scanning electron microscope (SEM) and transmission electron microscope (TEM). The surface morphology indicates strong evidence of stacked twin terraces and layers, suggesting that nanotwins grow up layer by layer. Combined with in situ characterization by SEM and molecular dynamics (MD) simulation, it is proved that the terraces originate from the triple junction of grain boundaries and grow up by extending along the lateral (111) crystal plane. A twin terrace-growing model for nt-Cu is then deduced, which distinguishes from deformation twins or annealed twins. This growth model would be prospective to help obtain high quality of nt-Cu in industry.

6 May 2019 in Journal of Materials Science: Materials in Electronics
Verified
Journal Article
Closed access
PDF file
GCGong Cheng
Gong Cheng
LLLe Luo
Le Luo
GXGaowei Xu
Gaowei Xu
HYHeng Yang
Heng Yang

30 March 2023 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
KLKun Li
Kun Li
GXGaowei Xu
Gaowei Xu
WZWenbo Zhao
Wenbo Zhao
KXKelaiti Xiao
Kelaiti Xiao
JRJie Ren
Jie Ren
XXXiaoming Xie
Xiaoming Xie
This paper introduces the preparation of golden bumps on the single flux quantum (SFQ) circuit chip by using the 20-μm-diameter golden wire and the flip-chip (FC) bonding of the SFQ chip and the substrate by the ultrasonic bonding method. Firstly, a coplanar waveguide (CPW) flip-chip interconnect structure was designed and fabricated, and the low-temperature transmission performance i.e., S-parameters were tested. The results showed that S 11 ≤ −10 dB and S 21 ≥ −3 dB among the range from 100 MHz to 52 GHz at 4.2 K. And the golden bump can transmit PRBSs of 5 Gbps, and its bit error rate (BER) is less than 10 −12 . Secondly, the flip-chip bonded SFQ driver& receiver circuits with 4.7-Ohm impedance were prepared and the BER of the SFQ pulse signals were measured by the driver& receiver circuits. The test results showed a zero-bit error rate when the number of transmitted codes is in the order of 10 6 . The experimental results show that the golden bump based flip-chip interconnection has good high-frequency transmission performance, and can be used for high-bandwidth and narrow pulse signal transmission in superconducting multi-chip modules (MCMs).

22 May 2025 in Superconductor Science and Technology
Verified
Journal Article
Closed access
YHYang Huang
Yang Huang
GXGaowei Xu
Gaowei Xu
KLKun Li
Kun Li
KXKelaiti Xiao
Kelaiti Xiao
XXXiaoming Xie
Xiaoming Xie
This paper proposes a novel fabrication method for superconducting through-silicon vias (TSVs) that integrates the niobium (Nb) film with the wet etching of silicon. In this research, the niobium film exhibited excellent deposition results on the unique tapered structure and smooth sidewalls created by wet etching, with good wafer uniformity. This paper also designs and compares a series of TSVs in vias’ size and different thicknesses of Nb film to investigate the effect of these process parameters on the metal thickness of the wall. Additionally, to enhance the utilization efficiency of individual vias and increase I/O interconnection densities, the through-silicon line is explored. Our measurements reveal that the critical temperature (T c) of the Nb-TSVs is 9.2 K, the critical current (I c) can reach 634 mA. The T c of the TSL is 9.14 K, the I c can reach 207.2 mA.

22 May 2023 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
XGXi Gao
Xi Gao
MNMinghui Niu
Minghui Niu
XGXiaoping Gao
Xiaoping Gao
HLHuanli Liu
Huanli Liu
GXGaowei Xu
Gaowei Xu
JRJie Ren
Jie Ren
Along with the improvement of integration and the requirement of high-speed operation, the passive transmission line (PTL) plays a significant role in superconducting integrated circuits due to its intrinsic advantage of extremely low propagation delay and low signal loss in long-distance transmission. Good impedance matching is critical to reduce the signal reflection in the transmission line and maximize the power transferred. Based on the PTL wiring layer selection under SIMIT-Nb03 process, we studied the equivalent input/output impedance for Josephson junction (JJ) at the IO port and explored a method of impedance matching in rapid-single-flux-quantum (RSFQ) circuits by adjusting the Stewart McCumber parameter $\beta_c$ of the JJ in the design of the PTL's driver and receiver. Furthermore, the accompanying influence from the JJ's modified $\beta_c$ on the performance of the driver and receiver is evaluated to maximize the profit of the functional circuits. The common-used serial resistor is removed to obtain a balanced bias margin for the PTL circuits. The proposed PTL has been designed and tested based on SIMIT-Nb03 fabrication process. ±30% bias margin for the PTL is achieved at low frequency and high frequency (40 GHz) contrast tests, including operation speed and transmission length as test vector. Additionally, a frequency sweep for 1 mm PTL is performed by the designed ring oscillator on the chip. The maximum working frequency is up to 129 GHz, with a margin duration of 8%.

5 March 2007 in Journal of Electronic Packaging
Verified
Journal Article
Closed access
PDF file
GXGaowei Xu
Gaowei Xu
YCYingjun Cheng
Yingjun Cheng
LLLe Luo
Le Luo
The heat-transfer characteristics of 128 small-sized plate-fin heat sinks in a supercomputer chassis are investigated with CFD simulation. The V-shaped curves of the chip temperature versus fin pitch and fin thickness are derived and a thermal resistance model is built to explore the profile and obtain the convective heat-transfer coefficient of the heat sinks. It turns out that the V-shaped profile arises from the joint action of the thermal conduction and convection of heat sink, which can be attributed to the intricacy of the dependencies of thermal resistances on either fin pitch or thickness. It can be further concluded that Biot criterion is applicable to estimate the Biot number of large-scale plate-fin heat sink but not applicable for the small-sized one. The convective heat-transfer coefficient is a complicated function of fin pitch and fin thickness. The empirical formulas of heat transfer are obtained and the fin pitch and fin thickness are optimized.