Оксана Валерьевна Червякова

Dr. Оксана Валерьевна Червякова


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 October 2024 in Materials
Verified
Journal Article
Open access
PDF file
TKTlek Ketegenov
Tlek Ketegenov
IVIgor Vongay
Igor Vongay
ОЧОксана Валерьевна Червякова
Оксана Валерьевна Червякова
BKBakhyt Kalmuratova
Bakhyt Kalmuratova
AKAnton V. Kononov
Anton V. Kononov
RNRashid Nadirov
Rashid Nadirov
This study investigates the feasibility of using an Al-Si eutectic alloy as a reactive fuel in energetic mixtures. Al-Si eutectic alloy powders were obtained from secondary resources and ground to a particle size of less than 100 μm. We examined these powders’ burning characteristics and thermal properties compared to pure Al powder. Results showed that the burning rate of energetic mixtures containing Al-Si eutectic alloys was 1.5 to 2.0 mm/s higher than those with pure Al. Additionally, the activation energy of pure PTFE was reduced from 81.29 kJ/mol to 61.75 kJ/mol when the Al-Si alloy was added. The formation of oxides, carbides, and fluorides in the combustion products of Al-Si-based mixtures significantly influenced their thermodynamics.

11 June 2026 in Materials
Verified
Journal Article
Open access
PDF file
AAAlbina Abdrassilova
Albina Abdrassilova
LMLyazzat Mussapirova
Lyazzat Mussapirova
ABAisulu Batkal
Aisulu Batkal
ИБИрина Багина
Ирина Багина
ОЧОксана Валерьевна Червякова
Оксана Валерьевна Червякова
KKKaster Kamunur
Kaster Kamunur
In this work, the catalytic effect of a mechanochemically synthesized Co–Fe metal–organic framework (Co–Fe-MOF) on the thermal decomposition behavior of composite ammonium perchlorate–aluminum (AP-Al) systems was studied. The structural and morphological properties of the synthesized catalyst were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The results confirmed the formation of a highly dispersed Co–Fe-MOF structure with a heterogeneous surface morphology and uniformly distributed active regions, as observed by SEM. The thermal decomposition behavior of the composites based on AP was studied using differential scanning calorimetry (DSC) at different heating rates. The addition of Co–Fe-MOF significantly affected the thermal decomposition process, moving the main exothermic decomposition step towards lower temperatures. At 5 wt.% of catalyst, the decomposition temperature decreased from 438–467 °C to 358–398 °C. The kinetic parameters were evaluated using the Kissinger and Ozawa–Flynn–Wall methods. The activation energy decreased from around 191–200 kJ·mol−1 for pure AP and 184–194 kJ·mol−1 for the AP-Al system to 95–109 kJ·mol−1 after the introduction of 5 wt.% of Co-Fe-MOF. The observed catalytic activity is associated with accelerated electron transfer processes involving the redox couples Co3+/Co2+ and Fe3+/Fe2+, which favor the decomposition of AP and the oxidation of aluminum. The results demonstrate that the mechanochemically synthesized Co–Fe-MOF is an effective catalyst to improve the thermokinetic performance of AP-based energetic systems.

19 October 2026 in Energies
Verified
Journal Article
Open access
PDF file
STSanat Tolendiuly
Sanat Tolendiuly
KKKaster Kamunur
Kaster Kamunur
ABAisulu Batkal
Aisulu Batkal
ОЧОксана Валерьевна Червякова
Оксана Валерьевна Червякова
MYMagzhan Yskak
Magzhan Yskak
Aluminum is widely studied as a metal fuel, but most work uses high-purity commercial powders or specially prepared alloys. Recycled aluminum has been reviewed mainly as a metallurgical feedstock or as a source of hydrogen from the aluminum water reaction. This review focuses on the link between the origin of secondary aluminum and its behavior as a reactive material. Machining chips, industrial powder waste, foil, secondary alloys and metallic aluminum recovered from dross are compared in terms of active aluminum content, particle size, surface oxide, alloy composition and processing history. The effects of grinding, mechanical activation, metal recovery and surface modification on oxidation and ignition are discussed. Direct combustion and hydrogen generation are considered together, with shorter sections on pyrotechnic and aerosol applications. Available data show that selected waste streams, especially AlSi10Mg powder and aluminum foil, can retain useful chemical energy. The main gaps are direct comparison with commercial powders, batch reproducibility and reliable measurement of active aluminum. Reactive use is most reasonable for waste streams that are difficult to return to high-quality alloys or already exist as fine powder.

15 October 2026 in Processes
Verified
Journal Article
Open access
PDF file
ОЧОксана Валерьевна Червякова
Оксана Валерьевна Червякова
IVIgor Vongay
Igor Vongay
ИБИрина Багина
Ирина Багина
LMLyazzat Mussapirova
Lyazzat Mussapirova
ABAisulu Batkal
Aisulu Batkal
KKKaster Kamunur
Kaster Kamunur
The optical masking properties of pyrotechnic obscurant aerosol-generating systems are time-dependent and determined by the interrelationship among aerosol-formation dynamics, radiation attenuation efficiency, spatial distribution, and subsequent dispersion of the aerosol cloud. In this study, we developed a process-parametric approach to compare the smoke formation dynamics and optical masking efficiency of a reference aerosol system and an alternative system, designated Recipe 1. Both systems were evaluated using a common 100 g initial composition mass. Because no independent aerosol-mass-yield measurements were available, this mass was used as the effective aerosol-forming mass in the parametric optical calculations, corresponding to a unit-yield normalization. The adopted extinction coefficients and generation times were treated as representative parametric inputs rather than experimentally measured properties, with optical calculations performed in the visible range of 0.4–0.7 μm. For the reference system, the mass extinction coefficient was assumed to be 4.0 m2·g−1, the initial delay time was 12 s, and the period of intensive aerosol formation was 70 s. For the parametric case designated Recipe 1, these values were set to 5.0 m2·g−1, 7 s, and 45 s, respectively. The calculated integral masking capacity increased from 400 to 500 m2 when the assumed mass extinction coefficient was changed from 4.0 to 5.0 m2·g−1. The optical density in the near-eye region increased from about 8.7 to 10.85. In the case of a larger prescribed-area scenario, the corresponding optical-density values were about 1.93 and 2.41. The calculated critical optical-density criterion Dcr = 1.3 was met in about 22–23 s for the reference system and 12–13 s for the Recipe 1 system. The calibrated model reproduced the prescribed target persistence times of approximately 145 s for Recipe 1 and 160 s for the reference system when the dispersion parameter was calibrated to the midpoint of the corresponding persistence intervals specified in the supporting technical assessment. These results indicate that the combinations of different process parameters determine the maximum optical attenuation level and the duration of the masking effect. Thus, the proposed approach provides a basis for a comparative engineering assessment of aerosol-generating systems. At the same time, the accuracy of the characteristics obtained as a result of the calculation must be verified by time-resolved experimental optical measurements.

8 October 2026 in Metals
Verified
Journal Article
Open access
PDF file
DMDinara Muktaly
Dinara Muktaly
ОЧОксана Валерьевна Червякова
Оксана Валерьевна Червякова
BMBagdatgul Milikhat
Bagdatgul Milikhat
MYMagzhan Yskak
Magzhan Yskak
STSanat Tolendiuly
Sanat Tolendiuly
KKKaster Kamunur
Kaster Kamunur
This study investigates the combustion behavior, composition-dependentl,3 combustion regimes, and temperature–time characteristics of ammonium perchlorate (AP)-based energetic compositions containing commercial aluminum (Al) and secondary Al-Si alloy powders. The secondary Al-Si powder was obtained from recycled automobile pistons and contained 75.42 wt.% Al and 10.74 wt.% Si, while the commercial Al powder contained 98.02 wt.% Al. Particle-size analysis showed similar median particle sizes for the commercial Al and secondary Al-Si powders, with D50 values of 4.429 and 4.527 μm, respectively. However, the secondary Al-Si powder exhibited a substantially broader particle-size distribution, with D10, D90, and Span values of 0.878 μm, 49.260 μm, and 10.687, respectively, compared with 3.833 μm, 5.484 μm, and 0.373 for commercial Al. Microscopic observations showed that the secondary Al-Si powder consisted predominantly of irregular and angular particles with a more heterogeneous surface morphology. AP/metal mass ratios of 60:40, 65:35, 70:30, and 75:25 were investigated. At 60:40, both compositions exhibited rapid and intense combustion, whereas at 65:35, both systems showed stable self-propagating combustion. At 70:30, the AP + Al composition exhibited intermittent combustion, while the AP + Al-Si composition maintained stable self-propagating combustion. At 75:25, both systems showed interrupted combustion. All combustion experiments were performed in triplicate, and the results are reported as mean ± standard deviation. Temperature–time profiles were obtained for all investigated AP/metal ratios, revealing distinct continuous and intermittent thermal responses corresponding to the observed combustion regimes. At 65:35, the maximum local apparent temperature reached 2552.9 ± 23.8 °C for AP + Al-Si and 1865.4 ± 19.7 °C for AP + Al. The results demonstrate that replacing commercial Al with secondary Al-Si alloy powder changes the observed combustion regimes and temperature–time response of AP-based compositions under the investigated conditions. These differences are associated with the combined effects of particle-size distribution, morphology, chemical composition, and phase composition rather than with a single material parameter.