Elizabeth Gregory

Dr. Elizabeth Gregory

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2018 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
EGElizabeth Gregory
Elizabeth Gregory
PJPeter D. Juarez
Peter D. Juarez
Automated fiber placement (AFP) provides precision and repeatable manufacturing of both simple and complex geometry composite parts. However, AFP also introduces the possibility for unique flaws such as overlapping tows, gaps between tows, tow twists, lack of layer adhesion and foreign object debris. These types of flaws can all result in a significant loss of performance in the final part. The current inspection method for these flaws is a costly and time intensive visual inspection of each ply layer. This work describes some initial efforts to incorporate thermal inspection on the AFP head and analysis of the data to identify the previously mentioned flaws. Previous bench-top laboratory experiments demonstrated that laps, gaps, and twists were identified from a thermal image. The AFP head uses an on- board lamp to preheat the surface of the part during layup to increase ply consolidation. The preheated surface is used as a thermal source to observe the state of the new material after compaction. We will present data collected with the Integrated Structural Assembly of Advanced Composites (ISAAC) AFP machine at Langley Research Center showing that changes to the temperature profile is sufficient for identifying all types of flaws.

8 May 2019 in AIP Conference Proceedings
Verified
Conference Paper
Open access
PDF file
PJPeter D. Juarez
Peter D. Juarez
EGElizabeth Gregory
Elizabeth Gregory
The advent of Automated Fiber Placement (AFP) systems have aided the rapid manufacturing of composite aerospace structures. One of the challenges that AFP systems bring is the variability of the deposited prepreg tape layers, which are prone to gaps, overlaps and twists. The current detection method used in industry involves halting fabrication and performing a time consuming visual inspection of each tape layer. Typical AFP systems use a quartz lamp to heat the base layer to make the surface tacky as it deposits another tape layer. The innovation discussed in this paper is to use the preheated base layer as a through transmission heat source and inspect the newly added tape layer in situ using a thermographic camera mounted onto the AFP structure. Such a system would not only increase manufacturing throughput by reducing inspection times, but would also aid in process development for new structural designs or material systems. To this end, a small thermal camera was mounted onto an AFP robotic research platform at NASA, and thermal data was collected during typical and experimental layup operations. The data was post processed to reveal defects such as tow overlap/gap, wrinkling, and peel-up. Defects that would have been impossible to detect visually were also revealed in the data, such as poor/loss of adhesion between plies and the effects of vacuum debulking. This paper will cover the results of our experiments, and the recent progress on the data reduction algorithms in preparation for machine learning development.

7 January 2018
Verified
Conference Paper
Open access
RGRay W. Grenoble
Ray W. Grenoble
TNThuan Nguyen
Thuan Nguyen
MMMartin J. McKenney
Martin J. McKenney
APAdam Przekop
Adam Przekop
PJPeter D. Juarez
Peter D. Juarez
DJDawn C. Jegley
Dawn C. Jegley

16 August 2018 in Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems
Verified
Journal Article
Closed access
PDF file
EGElizabeth Gregory
Elizabeth Gregory
PJPeter Juarez
Peter Juarez
This paper presents data from an innovative nondestructive evaluation method for automated composite fiber placement fabrication. Using Infrared images of the fiber as it was being placed we are able to provide valuable information about the quality of the part during fabrication. Herein, we discuss the methodology for data collection and processing. The described in-situ thermal nondestructive evaluation process is found to be applicable for identifying fiber tow overlaps, gaps, twists, puckering and poor ply adhesion prior to cure, thereby reducing the time and cost associated with post cure flaw repair or scrapping parts. This paper also describes the process of assembling data sets for an entire part beyond simple frame by frame analysis. Example data sets for both a flat part and a larger cylindrical part are presented to demonstrate the type of defect characterization information that can be obtained.

1 July 2021 in SoftwareX
Verified
Journal Article
Open access
WSWilliam C. Schneck
William C. Schneck
EFErik L. Frankforter
Erik L. Frankforter
EGElizabeth Gregory
Elizabeth Gregory

23 January 2025
Verified
Book Chapter
Closed access
PDF file
EGElizabeth Gregory
Elizabeth Gregory
PJPeter Juarez
Peter Juarez
CLCara Leckey
Cara Leckey