Системи та обладнання для зберігання теплової енергії є ключовими елементами при розгортанні відновлюваної теплової енергетики, актуальність якої на даному етапі розвитку набуває масштабного значення. Представлена стаття охоплює короткий аналіз сучасного стану основних технологій інтенсифікації процесів збереження теплоти, аналіз основних технологічних, технічних аспектів, що виникають при розробці теплових акумуляторів та за реальних умов їх експлуатації. Зокрема, обґрунтовано доцільність застосування теплового акумулювання, проаналізовано шляхи підвищення ефективності економії енергії, визначено основні аспекти процесів акумуляції теплоти. При обґрунтуванні доцільності застосування теплового акумулювання проаналізовано співвідношення поверхні та об’єму теплового акумулятора, що тісно пов'язані з розмірами складових елементів та продуктивністю системи зберігання теплоти. Це співвідношення теоретично вказує, як можливо підвищити коефіцієнт корисної дії та продуктивність систем зберігання теплової енергії. Доведено підвищення ефективності та економії енергії при врахуванні сезонних факторів та пікових навантажень. Розглянуто основні аспекти технологічної інтенсифікації процесів акумуляції теплоти, які полягають у подоланні теплової стратифікації рідинних теплових акумуляторів, обґрунтуванні модульного дизайну конструкції, посиленні передачі теплоти та маси, а також в зміні властивостей матеріалу при фазовому переході. Розглянуті аспекти при їх реалізації дозволяють оптимізувати роботу генеруючого обладнання з максимально можливим ККД системи теплопостачання, шляхом вирівнювання графіку навантаження у співвідношенні «генерація - споживання», а також розвантажити технологічне обладнання, знизити споживання паливно-енергетичних ресурсів. Як наслідок, знижується собівартість отриманої енергії та зменшуються шкідливі викиди в оточуюче середовище.
Економічна ситуація в Україні активно регресує в умовах воєнного стану і потребує зниження енергетичних витрат в побуті та промисловості, впровадження нових ефективних технологій й обладнання, що здатні інтенсифікувати технологічні процеси. У представленій статті надається пропозиція щодо використання мобільного технологічного комплексу для виробництва дисперсних систем на основі водорозчинних полімерів. У статті розглядається формування водорозчинних полімерів на основі сухих речовин гуарової та ксантанової камеді та карбоксиметилцелюлози (ВРП). Такі водорозчинні полімери, крім високих технологічних характеристик, володіють значними адгезійними властивостями, що значно ускладнює процес їх виробництва. ВРП широко використовується в харчовій, фармацевтичній, гірничодобувній, текстильній, паперовій і будівельній промисловості, сільському господарстві, нафтовидобутку, очищення промислових стічних вод, стабілізації грунту і т.д. новою областю застосування ВРП є приготування рідких теплоакумулюючих матеріалів, що використовуються в системах зберігання теплової енергії (TES) і забезпечують стабільну роботу системи теплопостачання. Робота мобільного технологічного комплексу заснована на триступеневому змішуванні компонентів в певній послідовності, що обумовлено хімією процесу розчинення твердих речовин. Мобільний технологічний комплекс передбачає використання оригінального магнітного змішувача на початковому етапі для попередньої активації води і якісного перемішування ВРП, а в кінці модернізованого змішувального реактора для додаткового перемішування розчину. Основний ефект від застосування мобільного технологічного комплексу - це підвищення якості і зменшення собівартості кінцевого продукту та зменшення часу технологічного процесу, що призводить до зниження споживання енергетичних ресурсів в процесах змішування, збільшення продуктивності та скорочення питомої енергоємності виробництва.
Viscose-derived carbon fibers (VDCFs) are lightweight and flexible textile materials with strong potential for electromagnetic interference (EMI) shielding; however, their performance is governed by surface chemistry. This study aims to tailor the functional properties of VDCFs via process-driven sulfurization. The fibers were treated with sulfur vapor at 400–800 °C under argon, followed by rapid quenching, enabling controlled sulfur incorporation (0.5–12 mmol g−1). Structural and chemical analyses (XRD, SEM–EDS, ATR–FTIR, and TPD–MS) revealed temperature-dependent sulfur incorporation and evolution of sulfur-containing surface functionalities. Sulfurization at 400–500 °C favored the formation of thermally labile sulfur species, tentatively assigned to mercapto-, sulfide-, and polysulfide-type groups, whereas higher treatment temperatures promoted more thermally stable sulfur-containing functionalities associated with the carbon framework. Two desorption regimes (120–250 °C and 250–500 °C) indicate the coexistence of weakly and strongly bound sulfur species. Importantly, sulfurization preserved fibrous morphology while increasing surface roughness and defect density, enhancing interfacial activity. The treatment temperature was identified as the key factor controlling sulfur loading and distribution, with sulfur content continuing to decrease above 600 °C, albeit at a reduced rate. Electromagnetic characterization in the X-band (8–12 GHz) showed a transition toward reflection-dominated EMI shielding, with reflectivity increasing from 87% for pristine fibers to 94–95% for sulfurized samples at 10 GHz, accompanied by corresponding decreases in transmission and absorption. These results demonstrate a clear processing–structure–property relationship and highlight sulfur-functionalized VDCFs as efficient textile components for EMI shielding.
13 August 2026 in Molecular Crystals and Liquid Crystals
1. The rapid development of electronics and telecommunication technologies has led to a significant increase in the level of electromagnetic radiation (EMR) in the environment, especially in the fr...
30 December 2021 in NTU "KhPI" Bulletin: Power and heat engineering processes and equipment
The article is devoted to topical issues related to the storage, accumulation and transportation of heat by stationary and mobile heat storage. Analysis of the current state of the district heating system indicates significant heat losses at all stages of providing the consumer with heat. The use of heat storage in heat supply systems leads to balancing the heat supply system, namely, the peak load is reduced; heat production schedules are optimized by accumulating excess energy and using it during emergency outages; heat losses caused by uneven operation of thermal equipment during heat generation are reduced; the need for primary energy and fuel consumption is reduced, as well as the amount of harmful emissions into the environment. The main focus is on mobile thermal batteries (M-TES). The use of M-TES makes it possible to build a completely new discrete heat supply system without the traditional pipeline transport of the heat carrier. The defining parameters affecting the efficiency of the M-TES are the reliability and convenience of the design, the efficiency and volume of the “working fluid”, the operating temperature of the MTA recharging and the distance of transportation from the heat source to the consumer. The article contains examples of the implementation of mobile heat accumulators in the world and in Ukraine, their technical and technological characteristics, scope and degree of efficiency. The technical indicators of the implemented project for the creation of a mobile heat accumulator located in a 20-foot container and intended for transportation by any available means of transport are given.
20 September 2023 in Energy Technologies & Resource Saving
The presented article proposes an analytical method for modeling heat exchange processes inside the “thermal core”, which is a coaxial cylinder filled with heat storage material with a phase change material. The equation for heating the cooled phase change material inside the “thermal core” is derived, taking into account the radial transfer of heat in any i-th zone and in the first and last ring zones, separately. The dependence of the heat capacity of the phase change material on the temperature was studied, taking into account the change in the heat capacity according to the cosine law. Also, a comparison of the analytical data of the mathematical modeling with the results obtained experimentally in previous studies is presented and obtained a high degree of similarity, which indicates the reliability of the proposed analytical methodology. Recommendations are provided for the practical implementation of the research results, namely the use of a coaxial pipe “thermal core” filled with a pre-selected material with a phase change material in the construction of storage batteries used in the thermal power industry. As a result, capacitive batteries with a “thermal core” filled with ceresin are used in mobile thermal batteries MTA-0,5MW. Bibl. 14, Fig. 4, Tab. 2.