1 January 2023 in Rocznik Ochrona Środowiska
The article's authors analysed the most perspective and widely known methods of neutralising the acidic condensate, which is a by-product of natural gas combustion. Among them, the hydrodynamic cavitation method was the most effective. In this regard, it was proposed to improve this method by using the method of discrete-pulsed energy input, which involves neutralisation due to the degassing process. Based on the mathematical model of the bubble ensemble dynamics, a numerical simulation of the formation and growth of vapour-gas bubbles in the process of cavitation boiling of condensate was carried out. Also, an analytical study of the evolution of the vapour-gas bubble population and changes in the current vapour content of the condensate during its boiling was investigated under different values of the initial size of gas micronuclei. The results of the experimental study also confirmed the effectiveness of this method and showed that almost complete removal of carbonic acid from condensate occurs during the first two minutes of processing. That is evidenced by the increased pH values of condensate, which corresponds to the range of permissible pH values of distilled water. Therefore, the carbonic acid in the condensate is absent. Using this method will significantly reduce the environmental effect and the amount of harmful emissions.
14 December 2020 in Scientific Works
Представлено огляд традиційних і сучасних технологій екстрагування рослинної і тваринної сировини та інноваційних методів інтенсифікації процесів екстракції. Розглянуто три основні фактори які забезпечують інтенсифікацію процесів екстракції, а саме: збільшення питомої поверхні контакту фаз, підтримання високого потенціалу масопереносу, а також прискорення масопереносу через міжфазну поверхню. Серед них найбільш вагомим фактором інтенсифікації є прискорення внутрішнього масопереносу в структурі сировини. На цій лімітуючій стадії відбувається підведення розчинника до цільового компонента і подальша молекулярна дифузія розчиненої речовини через складну капілярно-пористу структуру до поверхні частинки. Показано, що сучасні інноваційні методи, спрямовані саме на заміну молекулярної дифузії в матриці сировини на конвективний масоперенос. Ефективність цих методів базується на ефектах кавітації, які розглядаються як основний фактор інтенсифікацій внутрішнього масопереносу в сировині. Обговорюються основні механізми кавітаційної дії, які сприяють прискорення внутрішнього масопереносу. В статті особливу увага приділено роботі пульсаційних екстракторів, котрі ефективно застосовуються при екстрагуванні з грубо дисперсної сировини. Розглянуто конструкцію і принцип работи пульсаційного диспергатора-екстрактора, в якому для посилення кавітаційної ефектів дії вперше застосовано сопло Вентурі. До найбільш вагомих переваг нової конструкції віднесено можливість скорочення часу екстракції, максимальне вилучення цільових речовин, зменшення питомих енерговитрат та збільшення продуктивності, а також можливість одночасного проведення процесів змішування, екстракції, диспергування, гомогенізації, що дозволить в подальшому його застосування в різних промислових технологіях.
20 December 2024 in Energy Technologies & Resource Saving
This paper presents material related to the comprehensive technology for the utilization of acidic condensate formed at thermal power plants and contains a series of issues related to the processes of neutralization and degassing of the liquid, further carbon dioxide methanation, and water electrolysis. The proposed technology for acidic condensate utilization will address several environmentally oriented issues, including reducing CO2 emissions into the atmosphere, preventing acidic effluents from entering wastewater and natural water bodies, saving water resources, and promoting alternative fuel production. The basis of the technology is a cavitation reactor, which allows almost complete extraction of carbon dioxide gas present in the form of bubbles ranging in size from 5 µm to 0.5 µm. Experimental and theoretical studies of carbon dioxide extraction, the efficiency of liquid neutralization, and the sizes of bubbles that can be activated under the proposed processing regimes for carbon dioxide extraction were conducted to purposefully control the liquid neutralization processes through cavitation mechanisms implemented in the equipment of this technological scheme. The primary idea of the technology was associated with finding ways for effective reagent-free neutralization of condensate by extracting CO2. Treatment of condensate using the proposed technology practically realizes complete extraction of carbon dioxide gas from the liquid contained in bubbles, the concentration of which, according to literature data, ranges from 30 mg/kg to 70 mg/kg in acidic condensate. However, further development of this idea involves using a series of processes that allow avoiding the release of carbon dioxide into the atmosphere after its extraction from the liquid and redirecting this stream to the methanation process for fuel production. Extraction of impurities from the condensate allows obtaining water, which can be used to replenish the water circuit of the boiler or for the water electrolysis process to obtain hydrogen as a raw material for the carbon dioxide methanation process or as an alternative fuel. Bibl. 18, Fig. 5, Tab. 2.
20 September 2023 in Energy Technologies & Resource Saving
The presented article proposes an analytical method for modeling heat exchange processes inside the “thermal core”, which is a coaxial cylinder filled with heat storage material with a phase change material. The equation for heating the cooled phase change material inside the “thermal core” is derived, taking into account the radial transfer of heat in any i-th zone and in the first and last ring zones, separately. The dependence of the heat capacity of the phase change material on the temperature was studied, taking into account the change in the heat capacity according to the cosine law. Also, a comparison of the analytical data of the mathematical modeling with the results obtained experimentally in previous studies is presented and obtained a high degree of similarity, which indicates the reliability of the proposed analytical methodology. Recommendations are provided for the practical implementation of the research results, namely the use of a coaxial pipe “thermal core” filled with a pre-selected material with a phase change material in the construction of storage batteries used in the thermal power industry. As a result, capacitive batteries with a “thermal core” filled with ceresin are used in mobile thermal batteries MTA-0,5MW. Bibl. 14, Fig. 4, Tab. 2.
28 March 2023 in Science and Transport Progress
Purpose. Polymer products are used in industry due to their performance properties. The homogeneity of the melt is essential for the quality of the final product. Uniform distribution of components and properties ensures homogeneity of the product's physical and mechanical characteristics. Insufficient homogeneity can lead to defects in the product. The homogenization zone plays an important role in ensuring a homogeneous melt. In a disc extruder, the homogenization zone consists of four consecutive channels. In order to describe the flow for the entire homogenization zone, it is necessary to model the first channel first. Therefore, the main purpose of this work is to model hydrodynamic and thermal processes during the flow of a non-Newtonian fluid in a straight annular channel in a non-isothermal regime, as well as to create a general procedure for further calculations for other channels. Methodology. The analysis of publications was carried out. The procedure for calculating the velocity and shear rate of the longitudinal and tangential melt flow, the effective melt viscosity, and the calculation of the melt temperature change along the length of the annular gap in an analytical form was developed. Findings. In accordance with the developed procedure, the values of tangential and longitudinal velocities and shear rates were calculated. The graphical dependences of the distribution of tangential and longitudinal velocities and shear velocities of the melt flow along the width of the annular channel, the distribution of pressure and the temperature of the polymer melt averaged over the width of the gap along the length of the annular channel are presented. Originality. In this work, a stationary flow in a straight annular channel was modeled for LDPE of the 15803-020 grade in a non-isothermal regime. A general procedure for further calculations for other channels of the homogenization zone has been developed. Practical value. The given calculation procedure can be applied to the following channels of the homogenization zone, which allows describing the melt flow for the entire homogenization zone.
13 June 2024 in Food Resources
Предмет. Представлено вирішення питання інтенсифікації процесу екстракції біологічно-активних речовин (БАР) з сумішей цілісної та розмеленої насіннєвої сировини на прикладі насіння льону та екструдату бобів сої. Зроблено аналіз сучасних перспективних методів екстракції БАР з рослинної сировини, переваг і недоліків апаратів реалізації способів впливу на сировину. Запропоновано для оптимізації процесу екстракції експериментальні дослідження провести в пульсаційних диспергаторах ударного та кавітаційного типу, розроблених в ІТТФ НАН України, в яких реалізується метод дискретно-імпульсного введення енергії (ДІВЕ). Мета роботи полягає у вивченні закономірностей впливу механізмів ДІВЕ на фізико-хімічні та структурно-механічні властивості насіння олійних і зернобобових культур при обробці в пульсаційних апаратах. Методи. В ході проведення експериметальних досліджень в одержаних екстрактах визначено фізико-хімічні властивості: вміст сухих речовин, кількість білка. Реологічні властивості отриманих сумішей експериментально досліджено на ротаційному віскозиметрі. Мікроструктуру зразків до обробки в апаратах і зразків, отриманих протягом обробки з періодичним відбором проб, досліджено на світловому мікроскопі. Результати. В результаті експериментальних досліджень встановлено, що кавітаційний механізм є найенергоефективнішим і раціональнішим способом впливу на обробку насіння олійних і зернобобових культур. Для цілого та розмеленого насіння льону, екструдату бобів сої показники кількості виходу сухих речовин після екстракції в диспергаторі кавітаційного типу вищі, ніж у диспергаторі ударного типу на 2 %; 7,5 %; 5,8 %. відповідно. Вихід білка з цілого та розмеленого насіння льону після обробки у кавітаційному диспергаторі також вищий приблизно на 2 % і залежить від тривалості обробки, що максимально становить 10 хв. Встановлено, що для отриманих рідинних сумішей цілого і розмеленого насіння льону характерні властивості псевдопластичної рідини. У всіх сумішах проявляється неньютонівский характер в’язкості більш чітко зі збільшенням тривалості обробки. Сфера застосування результатів. Результати проведених досліджень можуть використовуватись у технологіях переробки насіння олійних і зернобобових культур з максимальним збереженням термолабільних біоактивних компонентів.