Floating tidal turbines typically move in six degrees of freedom - heave, pitch, roll, surge, sway and yaw - in response to the coupling effects of wind, waves and current. Despite extensive work on floating turbine motion and wake dynamics using Computational Fluid Dynamics simulation and laboratory experiments, no study to date has incorporated dynamic translation of floating turbines in regional-scale 3D hydrodynamic models. This study addresses this knowledge gap by demonstrating a technique in Telemac3D to dynamically translate a conceptual twin-rotor floating turbine with a simplified setup. The turbine is modelled via actuator discs in an idealised rectangular channel with time-varying inflow. A scenario of surging and swaying motions is examined, from which the turbine follows a user-defined path with maximum surge and sway amplitudes of 20m and 5m respectively. The rotor positions are updated dynamically within the simulation as the flow speed in the domain changes. Simulation results confirm that the technique effectively captures both the movement of the turbine and its wake. Although small discrepancies in hub-height velocity deficits between individual rotor wakes immediately downstream indicate limitations in current rotor volume discretisation and thrust distribution method for the dynamically moving turbine, the work completed to date provides a foundation for integrating dynamic floating turbine positioning with multiple degrees of freedom into large spatial-scale 3D hydrodynamic models.
Tidal turbine wake predictions in regional-scale hydrodynamic models typically account for rotor thrust but neglect the drag of support structures. This study introduces a method for representing turbine support structures as permeable drag volumes within TELEMAC-3D and evaluates their influence on wake characteristics. The method is demonstrated for the 1 MW DeepGen-IV turbine deployed at the Fall of Warness test site at the European Marine Energy Centre, Scotland. The tripod foundation, tower, and nacelle are each implemented as momentum source terms alongside an actuator disc rotor in a regional-scale model with mesh resolution down to 1.5 m with 24 sigma layers and output at 60 s intervals (1 s at instrument locations), validated against seabed-mounted ADCP measurements. Including the support structures improves the agreement with measured wake profiles by 6–18% in root-mean-square error at 3.7 rotor diameters downstream and extends the hub-height 5% velocity deficit distance by an average of three rotor diameters (~54 m), with substantial variability across tidal conditions. The tripod and tower drag also extend the velocity deficit into the lower water column, a feature absent from the rotor-only formulation, with potential relevance to near-bed processes such as bed shear stress and sediment transport which are not examined in the present study. The implementation is in principle extendable to other support concepts and multi-device studies, and the results indicate that support structure drag should be considered in regional wake models where wake persistence and downstream interactions are important.