Farhana Yasmin

Mrs. Farhana Yasmin

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 March 2022 in Energy Science & Engineering
Verified
Journal Article
Open access
MAMd Ohirul Qays Joarder Akash
Md Ohirul Qays Joarder Akash
MAMusse Mohamud Ahmed
Musse Mohamud Ahmed
MMM A Parvez Mahmud
M A Parvez Mahmud
Ahmed Abu-SiadaAhmed Abu-Siada
Ahmed Abu-Siada
S.M. MuyeenS.M. Muyeen
S.M. Muyeen
MRMd Momtazur Rahman
Md Momtazur Rahman
With the rapid increase of renewable energy generation worldwide, real‐time information has become essential to manage such assets, especially for systems installed offshore and in remote areas. To date, there is no cost‐effective condition monitoring technique that can assess the state of renewable energy sources in real‐time and provide suitable asset management decisions to optimize the utilization of such valuable assets and avoid any full or partial blackout due to unexpected faults. Based on the Internet of Things scheme, this paper represents a new application for the Supervisory Control and Data Acquisition (SCADA) system to monitor a hybrid system comprising photovoltaic, wind, and battery energy storage systems. Electrical parameters such as voltage, current, and power are monitored in real‐time via the ThingSpeak website. Network operators can control components of the hybrid power system remotely by the proposed SCADA system. The SCADA system is interfaced with the Matlab/Simulink software tool through KEPServerEX client. For cost‐effective design, low‐cost electronic components and Arduino Integrated Development Environment ATMega2560 remote terminal unit are employed to develop a hardware prototype for experimental analysis. Simulation and experimental results attest to the feasibility of the proposed system. Compared with other existing techniques, the developed system features advantages in terms of reliability and cost‐effectiveness.

2 July 2024 in Advanced Materials Technologies
Verified
Journal Article
Open access
FYFarhana Yasmin
Farhana Yasmin
AVAna Vafadar
Ana Vafadar
Majid Tolouei-RadMajid Tolouei-Rad
Majid Tolouei-Rad
Polymeric vascular bioresorbable stents (BRSs) have been widely used for the treatment of coronary artery diseases. While additive manufacturing (AM) is changing the landscape of the healthcare sector by enabling the realization of patient‐specific stents with highly complex structures. There are, however, challenges associated with the use of polymeric BRS, particularly in‐stent restenosis (ISR), related to its poor mechanical properties. Therefore, the aim of this review is to provide an overview of recent advancements in the development of polymeric BRSs designed to meet both mechanical and biological requirements. First, biopolymers as well as shape memory polymers (SMPs) that are suitable for BRSs are highlighted and briefly described. Second, different types of designing structures of vascular stents in addition to introducing effective mechanical metamaterials, e.g., negative Poisson ratio (NPR) structures are addressed. Subsequently, AM methods currently being used to fabricate polymeric BRSs, are discussed and compared with conventional fabrication methods. Lastly, future directions for research are proposed in relation to existing challenges to the realization of a new generation of AM BRSs. Overall, this paper serves as a benchmark for future cardiovascular applications, especially in order to obtain clinically viable polymeric vascular stents by selecting suitable polymers, designs, and AM technologies.

18 June 2026 in Micromachines
Verified
Journal Article
Open access
PDF file
FYFarhana Yasmin
Farhana Yasmin
Ana VafadarAna Vafadar
Ana Vafadar
Majid Tolouei-RadMajid Tolouei-Rad
Majid Tolouei-Rad
Stenting is a minimally invasive treatment used in managing peripheral artery disease (PAD). However, clinical challenges persist, including in-stent thrombosis and restenosis, primarily driven by axial foreshortening or elongation and suboptimal balance between radial stiffness and flexibility inherent to conventional stent designs. This study proposes an innovative arrow-shaped geometry exhibiting zero Poisson’s ratio (ZPR) behaviour for 3D-printed self-expanding Nitinol stents. The complete stent deployment process was modelled using finite element analysis (FEA), including radial crimping and subsequent expansion to enable systematic parametric investigation while accounting for µ-3D printing constraints. Response surface methodology (RSM) rigorously evaluated mechanical performance, defining peak stress, chronic outward force (COF), radial resistive force (RRF), and foreshortening (FS) as constraint and objective functions within the optimisation framework. The optimised ZPR stent achieved favourable performance: extremely low foreshortening (|FS| ≤ 0.12%), representing outstanding axial stability compared with previously reported self-expanding stents, and a well-balanced radial response with ~50% higher radial strength than positive Poisson’s ratio (PPR) structures, while 16.67% lower than negative Poisson’s ratio (NPR) counterparts. These results highlight the ZPR stent’s capability to minimise axial deformation while maintaining adequate radial support, highlighting substantial potential for precise, stable deployment in PAD applications.

15 April 2026 in Progress in Additive Manufacturing
Verified
Journal Article
Open access
PDF file
FYFarhana Yasmin
Farhana Yasmin
Ana VafadarAna Vafadar
Ana Vafadar
Majid Tolouei-RadMajid Tolouei-Rad
Majid Tolouei-Rad
Additive manufacturing (AM) has recently gained attention as an effective approach for printing patient-specific, self-expanding Nitinol (NiTi alloy) stents with complex structural designs for the treatment of peripheral arterial disease (PAD). However, achieving the desired phase transformation temperature and superelastic performance remains challenging due to compositional variations, phase imbalance and microstructural inhomogeneities introduced during the printing process. In this study, self-expanding Nitinol stents with a zero Poisson’s ratio (ZPR) structural design were fabricated via laser powder bed fusion (PBF-LB). The printed stents showed no evidence of cracks or structural defects, confirming PBF-LB’s capability to produce mechanically sound stent geometries. However, the as-printed stents exhibited an austenite finish (A f ) temperature above 80 °C, which is incompatible with body-temperature functionality. To address this, a systematic post-heat treatment strategy was developed by varying temperature and time, with the effects evaluated through transition temperature measurements and previously unreported cyclic three-point compression testing. The optimised treatment, solution annealing at 850 °C for 15 min followed by aging at 500 °C for 15 min, produced a homogenised microstructure with surface Ni diffusion, effectively reducing the A f temperature to 35 °C. Under these conditions, the stents demonstrated excellent superelastic performance at body temperature, achieving a 93.6% recovery ratio in the first compression cycle, and 97.9% after ten cycles, representing outstanding superelastic recovery compared with previously reported PBF-LB-printed NiTi. Therefore, this study establishes a viable post-processing heat-treatment protocol that provides a practical framework for manufacturing NiTi implants via AM, while maintaining the desired functional properties of self-expanding ZPR stents. Graphical abstract