Oleksandr Chekan

Prof. Oleksandr Chekan

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 February 2022 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
EAElchyn Aliiev
Elchyn Aliiev
APAndriy Paliy
Andriy Paliy
VKViktor Kis
Viktor Kis
APAnatoliy Paliy
Anatoliy Paliy
PPPetrov Petrov
Petrov Petrov
LKLeonid Korniienko
Leonid Korniienko
One of the tasks that imply increasing the milk productivity of cows is to create optimal maintenance conditions that ensure the increased use of the genetic potential of cattle based on the implementation of engineering and technological solutions. A mathematical model has been built that links the technical and technological parameters of the vacuum system of milking equipment, namely, the value of the working vacuum P, the pulsation frequency n, the ratio of pulsation cycles, and the tension strength of milking rubber FH to cows’ milk yield rate V. The range of milking plant operating parameters for milking in the milk line has been determined, at which the milk yield rate is maximum: P=52 kPa, n=57.6–58.8 min–1, δ=0.59–0.64, FH=59.3–60.4 H. Under these parameters, the milk yield rate is V=1.48–1.53 l/min. The results of the multifactor experiment have helped construct an adequate mathematical model of the second order, which confirms the theoretical dependence of the influence of the technical and technological parameters of the vacuum system of milking equipment on milk yield rate and the air flow of the milking machine. Analysis of the mathematical model has made it possible to establish the rational structural and technological parameters for the vacuum system of a milking machine: the value of the working vacuum, P=50.6 kPa; pulsation frequency, n=55.9 min–1, the ratio of pulsation cycles and the tension force of milking rubber FH=64.8 H. Under these parameters, the milk yield rate is maximum: V=1.47–1.52 l/min; the air flow consumption of the milking machine is Q=2.19 m3/h. The mathematical model built fully reveals the influence of technical and technological parameters of milking equipment on the efficiency of machine milking. Owing to this, the issue related to the rational choice of equipment is resolved.

19 February 2021 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
APAndriy Paliy
Andriy Paliy
EAElchyn Aliiev
Elchyn Aliiev
APAnatoliy Paliy
Anatoliy Paliy
KIKaterina Ishchenko
Katerina Ishchenko
SSShkromada Shkromada
Shkromada Shkromada
VMValentyna Mohutova
Valentyna Mohutova
Preparing cows for milking is one of the most important operations. Not only the speed of milk production but also the quality of milk depends on the level of the work performed. One of the most effective ways to mechanize the preparation of cows for milking implies the development of a special mechanical brush that cleans and stimulates the teat skin. As a result, there is no need to use additional foam detergents and napkins to cleanse and disinfect teats. A device has been designed for cleansing teats with two rotating brushes. Theoretical studies of the interaction of cleansing elements of the device for mechanical removal of pollutants from the udder teats in the course of milking operation were carried out. Assuming constancy of the modulus of elasticity, shape and roughness of teats, linear and angular velocities of brushes, nap stiffness, and homogeneity of physical and mechanical properties of contaminants on the teat, dependence of force Fe of the mechanical device on length l of the cleansing element and its speed ω was established. Under the condition that force Fe of the mechanical device is smaller than force Fp which causes pain but greater than the force retaining pollutants (adhesion), values of the main design and technological parameters of the developed device were determined: l=8 mm, ω=106 rpm. As a result of production tests, it was found that when using the developed device, the daily milk yield of the experimental group of cows exceeded that of the control group by an average of 1.1 times which has made it possible to obtain a supplement of 132.5 kg of milk. Along with this, there was a 0.19 % increase in milk fat content in the experimental group compared to the control group. The number of microorganisms decreased 2.2 times and the number of contaminant particles decreased 4.6 times

30 October 2022 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
APAndriy Paliy
Andriy Paliy
EAElchyn Aliiev
Elchyn Aliiev
APAnatoliy Paliy
Anatoliy Paliy
YKYana Kotko
Yana Kotko
RKRuslan Kolinchuk
Ruslan Kolinchuk
LULiliya Uskova
Liliya Uskova
The application of techniques for effective cleaning of milking routes in milking machines is an important way to improve the quality of milk and increase labor productivity in dairy farming. The object of research was the system of washing the milk line of the milking machine with the upper milk line. The problem of rational use of energy resources was solved in the implementation of a routine operation – washing the milking machine. Experimental studies were carried out according to the Box-Benkin plan of the second order for 3 factors (the speed of movement of the washing solution, V; the temperature of the washing solution, T; the duration of the rinsing phase, t). In this case, a mathematical apparatus for planning a multivariate experiment according to the D-optimal plan was used. It was found that with an increase in the speed of movement of the washing solution and temperature, as well as the duration of the rinsing phase, the number of microorganisms on the surfaces of the nodes and elements of the milky line decreases. Milk lines of the milking machine made of any material are better cleaned with a hotter washing solution (40 °C) than with a cold one (20 °C). Thus, when cleaning with a solution of 40 °C of stainless steel and food aluminum, the reduction of microorganisms is 4.3 times, glass – 4 times, and rubber – 4.7. The essence of the experiment was to establish patterns when cleaning the milk line from various materials. The influence of the regime parameters (the speed of movement of the washing solution, V; its temperature, T; and the duration of the rinsing phase, t) on the energy consumption of the milking machine, E, was determined. The compromise problem of rationalizing the washing modes of the milk lines of the milking machine has been solved. Thus, rational mode parameters for the washing system were established: V=2.4 m/s, T=38.2 °C, t=3.2 minutes. With these parameters, the optimization criteria are: N=79 thousand CFU/cm3, Q=23.3 l, E=8.08 kWh

16 August 2023 in Ukrainian Journal of Veterinary and Agricultural Sciences
Verified
Journal Article
Open access
PDF file
OCOleksandr Chekan
Oleksandr Chekan
The article presents data on the distribution and seasonal dynamics of subclinical abortions in cows with mycotoxin poisoning, particularly zearalenone. Subclinical abortion is a common phenomenon among cows in dairy farms and causes significant economic losses due to multiple unsuccessful inseminations, reduced animal productivity, and premature culling. The research aimed to study the seasonal fluctuations of hidden abortions in cows and the influence of the method of keeping in the conditions of feed contamination with microscopic fungi and their toxins. To diagnose hidden abortions, cows were diagnosed with the pregnancy on the 32nd day after insemination. When pregnancy was confirmed, the animals were examined for 92 days. At the same time, if the pregnancy was not confirmed, it was considered that an abortion had occurred. Seasonal fluctuations of subclinical abortions were established - the most significant number (up to 13.6 %) was diagnosed at the end of spring, associated with many animals entering the hunt after the transit period. It is also important that at that time, the number of mycotoxins in feed reached record values, which led to abortions due to toxic effects on the organs of the reproductive system in particular and the body in general. A large number of abortions (11.2 %) in the summer season was also confirmed. At the same time, animals kept free all year received a similar diet containing mycotoxins. At the same time, a concomitant negative factor was temperature shock at this time of year. This whole complex of reasons led to subclinical abortions followed by the resorption of the fetus. Sonographically, areas of reduced echogenicity of the uterus in cows after abortions were detected, which is evidence of the development of subclinical endometritis, confirmed by the uterus's heterogeneous echogenicity. In infertile animals, the presence of follicles with cavities and small yellow bodies that did not extend beyond the surface of the ovary was established sonographically. This indicates a hypofunctional state and impaired folliculogenesis and luteogenesis.

18 November 2021 in EUREKA: Physics and Engineering
Verified
Journal Article
Open access
PDF file
APAndriy Paliy
Andriy Paliy
EAElchyn Aliiev
Elchyn Aliiev
APAnatoliy Paliy
Anatoliy Paliy
KIKaterina Ishchenko
Katerina Ishchenko
ILIgor Lukyanov
Igor Lukyanov
YMYurii Musiienko
Yurii Musiienko
To implement effective cow milking, it is necessary to take into account the peculiarities of the milk flow process, the milking machine's adaptability to perform the given technological functions. The aim of research is to establish changes in the design and technological parameters and physical and mechanical properties of teat cup liner of milking machines during its testing and in production conditions. The results obtained will make it possible to make a rational choice of rubber, ensure an efficient milking process during its service life. It is found that the tensile strength of silicone teat cup liner at the beginning of operation was 1.6 times higher than that of a rubber compound, and after 6 months. operation – 1.7 times. With respect to the relative elongation, this difference was 1.4 times, and after operating time – 1.3 times. Studies have proven that rubber during operation changes its physical and mechanical properties: the length of the active part increased by 3.1 mm; wall thickness – 0.2 mm. It is found that the most intensively elastic properties of teat cup liner changed during the first 10–20 days. After 10 days, the closing vacuum increased by 16.6 % compared to the initial one, and after 20 days by 23.3 %, which amounted to 8.57 and 9.06 kPa, respectively. Up to 420 hours of operation, the clamping vacuum reached 11.3 kPa, which is 5.8 % lower than the requirements for toughening teat cup liner for rejection. In general, over the period of experiments, the average value of the vacuum of closing the opposite walls of teat cup liner increased from 7.35 to 12.43 kPa, which is 3.6 % higher than the norm (12 kPa). As a result of experimental studies, the regularity of the rubber tension force depending on the operating time in the form of a fourth degree polynomial is obtained. It is found that after 150 hours of operation, the tensile force of teat cup liner decreased by 21 %

6 June 2023 in Bulletin of Sumy National Agrarian University. The series: Veterinary Medicine
Verified
Journal Article
Open access
PDF file
OCOleksandr Chekan
Oleksandr Chekan
Відтворення корів є одним із найважливіших показників функціонування тваринницького підприємства. При згодовуванні кормів, що містять велику кількість мікотоксинів, зокрема зеараленону та деоксиніваленолу здатність корів до відтворення знижується через процеси дегенерації, апоптозу та організації в органах статевої системи та некротичних процесів у печінці та нирках. Метою досліджень було встановити вплив підкислювачів на основі органічних кислот на корекцію показників відтворення у корів та порівняти із такими у хворих тварин. Отримано дані про дисбаланс показників кальцію, зокрема його зниження до 1,75±0,64 ммоль/л, фосфору до 1,03±0,27 ммоль/л та підвищення магнію до 1,12±0,19 ммоль/л. Встановлено токсичні стани на основі підвищення рівня АСТ до 154,26±5,57 та АЛТ до 58,88. Встановлено підвищення естрадіолу до 12,85±0,62 нг/мл після згодовування кормів, що містять зеараленон. В той же час після застосування підкислювачів на основі органічних кислот естрадіол знижувався до 6,73±0,53 нг/мл і наближався до реферативних показників – 5,49±0,29 нг/мл. Досліджено динаміку прогестерону та лютеїнізуючого гормонів, що мали тенденцію до підвищення, тоді як у хворих тварин рівень цих гормонів залишався низьким. Застосування підкислювачів сприяло відновленню відтворної здатності у корів і забезпечило запліднюваність корів після 1-го отелу до 80,39%, 81,82% – корови 3-5 років та 69,39% – корів старших 5 років. Встановлено скорочення тривалості післяродового періоду до 34,8±1,33 доби, тривалості сервіс-періоду до 57,37±2,84 доби, індексу осіменіння до 2,8 у корів, яким застосовували підкислювач. Досліджено позитивний вплив застосування підкислювача перед використанням схем синхронізації. Отримано вагітних корів після 1-го отелу 56,67%, 46,88% – 3-5 отел, 41,38% – корів старшої вікової групи при застосуванні 7-ми денної схеми стимуляції. Аналогічно, 56,0% – корови 1-го отелу, 40,74% – корови 3-5 отел та 40,0% – корів старшої вікової групи при застосуванні синхронізації за схемою пресінх. Застосування підкислювачів сприяло підвищенню показників відтворення у корів.