In this work, a novel single-longitudinal-mode (SLM) four-wavelength laser configuration for sensing applications in the L-band is proposed and experimentally demonstrated. The sensor system presented here is based on ring resonators, and employs fiber Bragg gratings to select the operation wavelengths. The stable SLM operation is guaranteed when all the lasing channels present similar output powers. It is also experimentally demonstrated that when a SLM behavior is achieved, lower output power fluctuations are obtained. Characterization of the lasing structure for temperature sensing is also shown.

A self-started stable tunable mode-locked soliton fiber laser in a linear cavity structure composed by commercial passive elements is presented in this paper. It is based on the combination of an erbium-doped fiber as the active medium, and a saturated fiber Bragg grating (FBG) as a partial mirror of the cavity. The other side of the cavity consists of a semiconductor saturable absorber mirror acting also as the mode-locking device. The central wavelength of the FBG is selected by the application of axial strain giving rise to a tunable soliton over 8.6 nm on the C band with a variable spacing of 0.01 nm. The laser delivers 18.9 ps long pulses with a 0.14 nm bandwidth, an 8.2 MHz repetition rate, a pulse energy of 89 pJ, and a peak power of 4.71 W.

In this work, a novel single-longitudinal-mode (SLM) dual-wavelength laser configuration is proposed and demonstrated. This laser is based on ring resonators, and employs fiber Bragg gratings to select the operation wavelengths. It includes a short piece of highly doped Er-fiber that acts as the active medium. The stable SLM operation is guaranteed when the two lasing channels present similar output powers. This behavior is shown for different pump powers.

In this paper, a random distributed feedback fiber laser is proposed as a multiplexing scheme for ultralong range measurements (up to 200 km). Optical fiber sensors are time and wavelength multiplexed overcoming one of the main limitations of long-range sensing setups, which is their limited multiplexing capability. The direct modulation of the laser's cavity allows the interrogation of sensors by measuring the reflected power for different wavelengths and distances. Fiber Bragg gratings placed at different fiber locations and wavelengths have been interrogated in two different sensor networks. In addition, in order to improve the performance of the system, some features have been analyzed.

A stable tunable dual-wavelength random fiber laser is presented in this paper. It is based on the combination of an erbium-doped fiber and a Raman gain amplifier as an active medium and a single-mode fiber as distributed mirror forming a cavity with the fiber Bragg gratings using Rayleigh scattering as random distributed feedback with bidirectional pumping from a unique pump source. An output power instability as low as 0.11 dB has been attained. The 3-dB line-width is 0.13 nm, the optical signal-to-noise ratio is up to 50 dB and the dual-wavelength tunable band is over 9 nm.