In this work, a novel single-longitudinal-mode (SLM) four-wavelength laser configuration for sensing applications in the L-band is proposed and experimentally demonstrated. The sensor system presented here is based on ring resonators, and employs fiber Bragg gratings to select the operation wavelengths. The stable SLM operation is guaranteed when all the lasing channels present similar output powers. It is also experimentally demonstrated that when a SLM behavior is achieved, lower output power fluctuations are obtained. Characterization of the lasing structure for temperature sensing is also shown.
2 November 2017 in Journal of Lightwave Technology
A self-started stable tunable mode-locked soliton fiber laser in a linear cavity structure composed by commercial passive elements is presented in this paper. It is based on the combination of an erbium-doped fiber as the active medium, and a saturated fiber Bragg grating (FBG) as a partial mirror of the cavity. The other side of the cavity consists of a semiconductor saturable absorber mirror acting also as the mode-locking device. The central wavelength of the FBG is selected by the application of axial strain giving rise to a tunable soliton over 8.6 nm on the C band with a variable spacing of 0.01 nm. The laser delivers 18.9 ps long pulses with a 0.14 nm bandwidth, an 8.2 MHz repetition rate, a pulse energy of 89 pJ, and a peak power of 4.71 W.
An experimental study of a high temperature distributed optical fiber sensor based on Raman Optical-Time-Domain-Reflectometry (ROTDR) (up to 450 °C) and optical fibers with different coatings (polyimide/carbon, copper, aluminum and gold) is presented. Analysis of the distributed temperature sensor (DTS) measurements determined the most appropriate optical fiber to be used in high temperature industrial environment over long periods of time. To demonstrate the feasibility of this DTS for an industrial application, an optical cable was designed with the appropriate optical fiber and it was hermetically sealed to provide the required mechanical resistance and isolate the fiber from environmental degradations. This cable was used to measure temperature up to 360 °C of an industrial furnace during 7 days.
12 January 2010 in IEEE Photonics Technology Letters
In this work, a novel single-longitudinal-mode (SLM) dual-wavelength laser configuration is proposed and demonstrated. This laser is based on ring resonators, and employs fiber Bragg gratings to select the operation wavelengths. It includes a short piece of highly doped Er-fiber that acts as the active medium. The stable SLM operation is guaranteed when the two lasing channels present similar output powers. This behavior is shown for different pump powers.
14 November 2013 in IEEE Journal of Selected Topics in Quantum Electronics
This paper presents a new stable dual-wavelength fiber-ring laser based on erbium-doped fiber amplification. The wavelength selection is made by a combination of fiber Bragg gratings and phase shift fiber Bragg gratings. Two laser emission lines were obtained simultaneously in single-longitudinal-mode operation showing a power-instability lower than 0.35 dB, an OSNR higher than 55 dB, a narrow-linewidth of 13 KHz and an optical output power around 0 dBm for both wavelengths. This proposed configuration allows the individual control of the loss of each channel.
A stable tunable dual-wavelength random fiber laser is presented in this paper. It is based on the combination of an erbium-doped fiber and a Raman gain amplifier as an active medium and a single-mode fiber as distributed mirror forming a cavity with the fiber Bragg gratings using Rayleigh scattering as random distributed feedback with bidirectional pumping from a unique pump source. An output power instability as low as 0.11 dB has been attained. The 3-dB line-width is 0.13 nm, the optical signal-to-noise ratio is up to 50 dB and the dual-wavelength tunable band is over 9 nm.