Molybdenum disulfide (MoS2) is considered as a promising alternative to conventional semiconductor materials that used in the IC industry because of its novel properties. In this paper, we explore the optical and electronic properties of MoS2 for photodetector and transistors applications. This simulation is done using ‘DFT materials properties simulator’. Our findings show that mono- and multi-layer MoS2 is suitable for conventional and tunnel FET applications due to direct and indirect band-gap respectively. The bulk MoS2 crystal, which are composed of stacked layers have indirect bandgap and mono-layer MoS2 crystal form direct bandgap at the K-point of Brillouin zone. Indirect bandgap of bulk MoS2 crystal implies that phonons need to be involved in band-to-band tunneling (BTBT) process. Degenerately doped semiconductor, which is basically spinning the Fermi level, changing the DOS profile, and thinning the indirect bandgap that allow tunneling from valence band to conduction band. The optical properties of MoS2 is explored in terms of Absorption coefficient, extinction coefficient and refractive index. Our results shows that a MoS2 based photodetector can be fabricate to detect light in the visible range (below 500nm). It is also observed that the MoS2 is most sensitive for the light of wavelength 450nm.
1 February 2017 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Continuous shrinking of the size of CMOS technology leads to extremely fast devices, but the resulting interconnect structures impose so many parasitic effects that the advantage of extremely scaled and ultrahigh-speed transistors would be completely overshadowed if appropriate remedial steps are not taken. This requires an accurate and efficient estimation of interconnect parasitics and analysis of their impact on integrated circuit performance. This paper proposes a new delay model for RLC interconnect networks in CMOS technology based on a second order approximate transfer function. The proposed modeling approach includes all possible scenarios (complex poles, real poles, and double poles) in the interconnect model. Simulation results show that the proposed delay model is almost independent of the ratio of Vout/Vin, and the driver resistance has significant impact on the delay. The simulation results also show that the real pole model provides better accuracy and is much faster than the complex pole model. This observation would help to optimize the values of interconnect parasitics for faster operation.
Over a few decades, a remarkable amount of research has been conducted in the field of speech signal processing particularly on deception detection for security applications. In this study, a comprehensive review on recent machine learning approaches using verbal and non-verbal features are presented for deception detection. A brief overview on different feature extraction techniques, the results of recognition rate, and computational time based on machine learning methods are summarized in a tabular format. In addition, numerous datasets used as primary sources of deception detection in the review articles are also presented in this work. Key findings from the reviewed articles are summarized and a few major issues related to deception detection approaches are examined. A statistical analysis which conducted by extracting the significant information from the eighty -eight (88) scientific papers over the last thirty (30) years are provided in this review paper. The results emphasize on the trends of research in deception detection as well as further research opportunities for researchers as a part of continuous progress.
24 September 2020 in IEEE Transactions on Nanotechnology
Having a 1D material like Multiwall Carbon Nanotube (MWCNT) as a potential candidate for high speed Very Large Scale Integration (VLSI) interconnect creates a good scope to reduce the delay by estimating the parasitic elements i.e. Resistance (R), Inductance (L) and Capacitance (C) properly. We have contrived an innovative configuration namely Tetramorphic (TM) for the bundle of MWCNTs with four different diameters. We have focused on 45 nm, 22 nm, 11 nm and 7 nm technology nodes to justify the novelty of our proposed configuration over the existing MWCNT bundle configurations. Having the parasitic RLC elements for a specific technology node, the diameter optimization took place in this work . Subsequently, we obtain the propagation delay result for local, semi-global and global level interconnect. Finally, we compare the result with the other existing configuration to show the supremacy of our introduced configuration for MWCNT bundle to explore high speed VLSI interconnect and represent crosstalk delay and power dissipation. Moreover, this configuration is highly dense which will offer the size shrinkage feature in a substantial manner.
In this research, four unique nonlinear speech features are extracted and analyzed to study the dissimilarity pattern between when the speaker is being deceitful and truthful based on how human speech is perceived. The speaker was under stress in a police interrogation where two ground truth and two deceitful responses were recorded during three different times of the day. Using the audio recordings from all three sessions, the cepstral features and spectral energy features are extracted. Cepstral features are the Mel frequency cepstrum coefficient, from where the delta cepstrum and the time-difference cepstrum features are developed. On the other hand, the spectral energy features are the energy of Bark band energy from where the delta energy and the time-difference energy features are developed. The Levenberg-Marquardt classification method and the long short-term memory classification method are then applied to evaluate the accuracy of detecting deception based on the nine unique training and testing combinations of the three different sessions and their extracted cepstrum and spectral energy features. In addition, the principal component analysis is applied to reduce the dimensionality from the extracted features for further improvement. The projected principal components of the four types of features showed improved accuracy in order to distinguish between truthful and deceptive speech pattern. After incorporating with principal component analysis, the long short-term memory classification method with time-difference spectral energy feature shows the highest recognition rate compared to Levenberg-Marquardt algorithm with other cepstral and spectral features.
The aroused quest to reduce the delay at the interconnect level is the main urge of this paper, so as to come across a configuration of carbon nanotube (CNT) bundles, namely, squarely packed bundles of mixed CNTs. The demonstrated approach in this paper makes the mixed CNT bundle adaptable to adopt for high-speed very-large-scale integration (VLSI) interconnects with technology shrinkage. To reduce the delay of the proposed configuration of the mixed CNT bundle, the behavioral change of resistance (R), inductance (L), and capacitance (C) has been observed with respect to both the width of the bundle and the diameter of the CNTs in the bundle. Consequently, the performance of the modified bundle configuration is compared with a previously developed configuration, namely, squarely packed bundles of dimorphic MWCNTs in terms of propagation delay and crosstalk delay at local-, semiglobal-, and global-level interconnects. The proposed bundle configuration is, ultimately, enacted as the better one for 32-nm and 16-nm technology nodes, and is suitable for 7-nm nodes as well.