1 January 2018 in AIP Conference Proceedings
Molybdenum disulfide (MoS2) is considered as a promising alternative to conventional semiconductor materials that used in the IC industry because of its novel properties. In this paper, we explore the optical and electronic properties of MoS2 for photodetector and transistors applications. This simulation is done using ‘DFT materials properties simulator’. Our findings show that mono- and multi-layer MoS2 is suitable for conventional and tunnel FET applications due to direct and indirect band-gap respectively. The bulk MoS2 crystal, which are composed of stacked layers have indirect bandgap and mono-layer MoS2 crystal form direct bandgap at the K-point of Brillouin zone. Indirect bandgap of bulk MoS2 crystal implies that phonons need to be involved in band-to-band tunneling (BTBT) process. Degenerately doped semiconductor, which is basically spinning the Fermi level, changing the DOS profile, and thinning the indirect bandgap that allow tunneling from valence band to conduction band. The optical properties of MoS2 is explored in terms of Absorption coefficient, extinction coefficient and refractive index. Our results shows that a MoS2 based photodetector can be fabricate to detect light in the visible range (below 500nm). It is also observed that the MoS2 is most sensitive for the light of wavelength 450nm.
20 October 2016 in IEEE Transactions on Circuits and Systems II: Express Briefs
Power gating circuits are utilized to manage power consumption and thermal stress in microprocessors and other high-performance integrated circuits. Most of the power gating techniques utilize sleep transistors in different configurations to reduce the subthreshold leakage current, which is the primary source of the standby power. These sleep transistors, which are added between the supply lines and the circuits as header and footer switches, impose additional area, delay, power and other overheads and complexities. This paper introduces the concept of combining the functionality of the sleep transistors with the logic devices by utilizing fully depleted silicon-on-insulator (FDSOI) device. This FDSOI transistor based power gating circuit design approach will eliminate the requirement of employing a separate set of sleep transistors to place the circuit in the sleep or idle mode. This will reduce the overall complexity and overheads of integrated circuits and simplify power gating techniques. In addition, it improves the overall power efficiency and lower thermal effects. SOI devices are becoming critically important for various VLSI applications, because SOI devices provide higher performance and reliability, and options to design circuits with multiple-threshold voltages (multi-Vt) to ensure faster switching and lower power consumption. In the proposed circuit design approach, the flexibility to control the threshold voltage of a double-gate FDSOI device via back gate has been exploited to eliminate the need for using a separate set of sleep transistors. The presented sleep transistor design is verified via Hspice simulation using Leti- UTSOI model from CEA-Leti.
18 June 2021 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Emerging nonvolatile memories (NVMs), such as resistive RAM (RRAM) and spin-transfer-torque RAM (STTRAM), present exciting opportunities for data storage applications and offer improved access speeds, retention times, power consumption, and scalability. However, these technologies leak the Hamming weight of data through power side-channel during read and write operations. We propose a technique leveraging on-chip capacitor and voltage regulator (VR) that powers the NVM read/write operations. The side-channel leakage is eliminated due to the isolation of memory array from the external power supply during read/write operations. The residual charge on capacitor bank is discarded safely to prevent information leakage during capacitor recharging. The VR ensures a steady voltage during the entire read/write operations even though the capacitor discharges. The design presents a performance (instructions per cycle) degradation of 0.53%-1.2% under parsec and splash-2 benchmarks and incurs an area overhead of ~ 3.54×10 -5 % and an energy overhead of ~ 3.05 ×10 -5 % for a 4-Mb RRAM memory array. For a 64-bit word, the design improves security by 2.7 × 10 19 × to 2 64 ×. SecNVM should be used in small security-critical memory macros to limit the overhead. SecNVM is generic and could protect any security module such as encryption engines, against power side-channel attacks.
1 June 2016 in Microelectronics Journal
18 February 2020 in International Journal of Electronics Letters
This paper introduces a new doping profile for devices to be used in subthreshold circuits. Results show that the optimized device with the proposed doping profile offers higher ON current in the subthreshold region. In this paper, threshold voltage modelling has been performed and a comparative analysis is presented between super-threshold and sub-threshold devices. We have also analyzed the subthreshold swing characteristics of the device with the proposed doping profiles. Our analysis shows that better subthreshold swing and less threshold voltage variation can be achieved using our new doping profile.