Refractive index modification in glass or crystalline materials typically involves conversion of state (amorphous to crystalline or crystalline to amorphous) through a homogeneous, external stimulus such as laser- or current-induced heating, melting, or localized (resonant) bond modification. With the exception of traditional phase change materials that exploit reversibility, usually at high speeds and over multiple cycles, localized patterning of the refractive index is most frequently employed to induce a complete change of phase to enable the creation of embedded or surface optical structures. The present effort employs a novel, laser-induced vitrification (LIV) process developed to spatially modify the refractive index in a fully homogeneous glass ceramic material. Such processing leads to a local re-vitrification of the pre-existing nanocrystalline microstructure within the material to realize spatially-defined, refractive index profiles. Post-processing refractive index modification on the order of ∆n ~-0.062 was realized in a partially crystallized, multi-component chalcogenide glass ceramic nanocomposite, subjected to bandgap laser exposure. Spatially-varied phase modification in the lateral and axial directions within a bulk glass ceramic is quantified and the optical function of the resulting structure is demonstrated in the formation of an infrared grating. The underlying mechanism associated with the resulting local refractive index modification is explained through quantification of the multi-phase material attributes including parent glass properties, crystal phase identity and phase fraction as determined through micro-XRD and electron microscopic analysis. This correlation validates the proposed mechanism associated with the modification. A threshold power density for LIV in the starting glass ceramic has been determined based on exposure conditions and material attributes.
Broadband supercontinuum (SC) generation requires host material attributes defined by both optical and physical properties and the material’s manufacturability. We review and define the trade-offs in these attributes as applied to fiber or planar film applications based on homogeneous glass property data, and provide a series of examples of how one might optimize such attributes through material compositional and morphology design. As an example, we highlight the role of varying composition, microstructure, and linear/nonlinear optical properties, such as transmittance, refractive index, and the multiphoton absorption coefficient, for a series of novel multicomponent chalcogenide glasses within a model GeSe2-As2Se3-PbSe (GAP-Se) system. We report key optical property variation as a function of composition and form, and discuss how such glasses, suitable for both fiber and planar film processing, could lend themselves as candidates for use in SC generation. We demonstrate the impact of starting glass composition and morphology and illustrate how tailoring composition and form (bulk versus film) leads to significant variation in linear, nonlinear, and dispersive optical property behavior within this system that enables design options that are attractive to optimization of desirable SC performance, based on optical composites.
Despite their importance in applications such as nonvolatile memory, integrated photonics, and compact optics, the crystalline‐to‐amorphous transition in chalcogenide phase‐change materials (PCMs) is not understood. Herein, this transition in a technologically relevant infrared (IR) transparent chalcogenide material, Ge2Sb2Se4Te1 (GSST), is examined. Thin films of GSST using fully depleted silicon on insulator (FDSOI) microheaters are discussed and the phase transitions by polarized and unpolarized Raman spectroscopy is studied. It is confirmed that the crystalline‐to‐amorphous transition is driven by conversion of Ge–6Se octahedra to Ge–4Se tetrahedra with the extra Se being incorporated into an Se—Se network. This is similar to the mechanism reported in earlier work for Ge2Sb2Te5 (GST). Recrystallization requires disrupting the Se—Se network and the crystallization activation energy is consistent with the Se—Se bond energy. Across 1000 crystallization–amorphization cycles, GSST exhibits no qualitative change in the Raman spectrum, suggesting limited film oxidation or chemical decomposition. After several hundred cycles, recrystallization is less complete, likely due to dewetting of GSST during the high‐temperature amorphization step leading to compromise of the capping layer and loss of GSST. The utility of GSST as a photonic material through fabrication and testing of a GSST‐coated, integrated silicon photonic Mach–Zender interferometer, is discussed.
This paper reports a method to enable, for the first time, reconfigurable control of resonance splitting of one or multiple arbitrarily selected azimuthal orders in a microring resonator. This is accomplished by inscribing Bragg gratings in photosensitive Ge23Sb7S70 chalcogenide microring resonators via a novel cavity-enhanced photo-inscription process, in which injection of light at the targeted C-band resonance frequency induces a spatially-varying refractive index change. The so-formed Bragg grating precisely matches the selected resonance order without introducing optical losses. Long-term room temperature stability of the photo-inscribed Bragg gratings has been verified in darkness and during operation with reduced optical power levels. The Bragg gratings can be reconfigured by first erasure with flood illumination of visible light at 561 nm and subsequent re-inscription. We also report controlled splitting of multiple resonances by inscribing superimposed Bragg gratings.