Radosław Sójka

Radosław Sójka


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 June 2026 in Materials
Verified
Journal Article
Open access
PDF file
RSRadosław Sójka
Radosław Sójka
PZPiotr Ziarkowski
Piotr Ziarkowski
KKKamil Klamczyński
Kamil Klamczyński
NKNatalia Aleksandra Kowalska
Natalia Aleksandra Kowalska
SBSlawomir Blasiak
Slawomir Blasiak
MSMichal Skrzyniarz
Michal Skrzyniarz
Controlling macro-geometrical errors in the dry drilling of ductile cast iron remains a critical challenge for sustainable and cost-efficient automotive component manufacturing. This paper investigates the influence of cutting speed (vc) and feed per revolution (fn) on the dimensional and shape accuracy of holes drilled in EN-GJS-500-7 ductile cast iron using an HSS DIN 338 helical drill (Ø 11.8 mm, Ceratizit) on an AVIA VMC800 CNC milling centre. A one-factor-at-a-time (OFAT) experimental design was applied: the feed effect was evaluated at vc = 10 m/min with fn ∈ {0.10, 0.15, 0.20} mm/rev, while the speed effect was evaluated at fn = 0.20 mm/rev with vc ∈ {10, 25, 30} m/min. Cutting forces, torques, and vibration accelerations were recorded using an HBM MSC 10 transducer and a PCB 356A01 tri-axial accelerometer. Hole geometry was assessed on a Zeiss Contura G2 coordinate-measuring machine (CMM), and surface texture was evaluated with a TOPO 01P contact profilometer. The expanded measurement uncertainty (k = 2) was estimated based on duplicate test specimens. All drilled holes fell within the IT12 dimensional tolerance (PN-EN 22768-1:1999 grade c), with diameter oversizes ranging from +0.26 mm to +0.46 mm relative to the nominal bore. Cutting speed was identified as the dominant factor affecting both diameter oversize and cylindricity, which increased by 60% (from 0.10 to 0.16 mm) as vc rose from 10 to 30 m/min. Vibration accelerations increased nonlinearly between vc = 25 and 30 m/min (by a factor of 2.5×), indicating an approach to a structural resonance condition. The lowest surface roughness (Ra = 6.6 µm) was obtained at vc = 25 m/min. These findings establish clear physical baselines for tool deflection limits, demonstrating that managing dynamic process stability is vital for optimising macro-geometrical accuracy in the dry machining of cast iron alloys.