The beginning of the 21st century for the fuel and energy complexes of most countries is characterized as a period of active restructuring and a fundamental shift in developmental priorities. The basis of these changes is technological development. Industry 4.0 technologies have particular importance in achieving maximum optimization of production processes. In the same way, they are applicable in establishing effective interaction between the energy sector and other sectors of the economy. The authors outline an approach to assessing the country’s fuel and energy balance state through the selected properties: sustainability, accessibility, efficiency, adaptability and reliability. Hence, a model of the fuel and energy complex was created on the example of the Russian Federation, considering the country’s territorial and functional division. The methodology is based on scenario modeling of the influence level of external challenges in conjunction with the accompanying technological development. The mathematical model allowed forecasting changes in the properties of the energy system. The scientific significance of the work lies in the application of a consistent hybrid modeling approach to forecast the state of the fuel and energy balance. The results of the study are useful in compiling scenarios for the regional and entire development of the fuel and energy complex. Further model improvements should include an expansion of the number of counted industries and their relations.
Forecasting the development of regions is one of the most challenging tasks of modern economics. The quality of any forecast is determined by the methodology used. Accordingly, criticism of existing forecasts is largely connected to their methodological approaches. In this paper, a multi-level approach to forecasting the development of the region is proposed, starting with the definition of the key performance indicators and ending with the assessment of various scenarios. The study was conducted on the example of the Russian Arctic, divided into three technological zones, with three scenarios of the development for each (negative, base, positive). The application of the proposed methodology allowed for modeling the development of the region until 2035. The results show that the Russian Arctic has a huge difference in the achievability of different goals, e.g., 98% of the electricity supply targets are achievable in a baseline scenario, while only 52% are achievable in a set of “navigation” targets. The proposed methodology can be useful for diving into the details of regional forecasts, such as the impact of key companies in a region or the influence of international politics.
The article addresses the division of responsibility for voltage unbalance between the supplier and consumers. Based on a review of existing methods, the superposition method was identified as the most established, though it requires well-defined impedance data. This study evaluates three alternative methods through comprehensive MATLAB/Simulink R2021a simulations (26 test cases) with an unbalanced voltage source and three consumers. The simulation results show that the consumer on/off switching method identified the dominant and secondary distortion sources in 25 out of 26 cases (96.2%) within the considered network topology. The method for establishing the relationship between distortion level and consumer load achieved a success rate of 92.3%. However, both methods are inherently qualitative and cannot quantify the actual contribution shares, which restricts their applicability as full-scale alternatives to the superposition method. The secondary power analysis method, despite its theoretical promise as a quantitative tool, proved to be the least effective: when analyzing only the active component of the secondary power, it identified the distortion sources in only 15 out of 26 cases (57.7%); when both active and reactive components were analyzed, the success rate dropped to 42.3%. This makes it unsuitable for systems with multiple unbalance sources. Thus, the superposition method remains the most suitable quantitative approach, provided that the required impedance data are available, while the consumer on/off switching method and the relationship-based method offer qualitative alternatives for source identification within the considered topology. Future work should focus on experimental validation and the development of a practical framework for allocating responsibility for voltage unbalance in practical distribution networks.