Haidan Cao

Dr. Haidan Cao


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 May 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
XZXiaoliang Zhang
Xiaoliang Zhang
HCHaidan Cao
Haidan Cao
JFJiawei Fang
Jiawei Fang
JZJun Zhang
Jun Zhang
LWLingyun Wang
Lingyun Wang
Aluminium powder, an energetic material, is prone to thermal runaway upon water exposure under local heat sources, yet the nonadiabatic mechanisms of micron sized accumulated aluminium powder under localized heating remain unclear. This study employs a proprietary characterization platform to investigate the effects of particle size, water content, and local heat source power on heat transfer in the dry state and on parameters including induction time, onset temperature, peak heat release rate, and reaction heat during the induction and main reaction phases. In the dry state, decreasing particle size enhances effective thermal conductivity and accelerates temperature rise, whereas elevated local heat source power exacerbates thermal inertia. Under local heating upon water exposure, reduced particle size significantly enhances reactivity; the reaction heat of 2 μm powder reaches 983 J/g, approximately fourfoldAs shown in Figure9 that of 106 μm powder. Water content exhibits nonmonotonic regulation, with onset temperature minimizing at 25% water content and 66.4 °C and reaction heat peaking at 33%. Paradoxically, elevated local heat source power suppresses reaction intensity, and reaction heat at 10 W is one sixth of that at 2.5 W, attributed to rapid product layer densification and the steam film barrier effect shifting the controlling mechanism from chemical to diffusion control. A coupled multifactorial predictive model incorporating the three factors was established with R2 of 0.92, providing data and guidance for aluminium powder storage hazard prevention.

20 June 2026 in Processes
Verified
Journal Article
Open access
PDF file
XZXiaoliang Zhang
Xiaoliang Zhang
HCHaidan Cao
Haidan Cao
JFJiawei Fang
Jiawei Fang
JZJun Zhang
Jun Zhang
LWLingyun Wang
Lingyun Wang
Aluminium powder, an energetic material, is prone to thermal runaway upon water exposure under local heat sources, yet the nonadiabatic mechanisms of micron-sized accumulated aluminium powder under localised heating remain unclear. This study employs a proprietary characterisation platform to investigate the effects of particle size, water content, and local heat source power on heat transfer in the dry state and on parameters including induction time, onset temperature, peak heat release rate, and reaction heat during the induction and main reaction phases. In the dry state, decreasing particle size enhances effective thermal conductivity and accelerates temperature rise, whereas elevated local heat source power exacerbates thermal inertia. Under local heating upon water exposure, reduced particle size significantly enhances reactivity; the reaction heat of 2 μm powder reaches 983 J/g, approximately fourfold that of 106 μm powder. Water content exhibits a nonmonotonic effect, with the onset temperature reaching a minimum of 66.4 °C at a water content of 25%, while the reaction heat peaks at 33% water content. Interestingly, increasing local heat source power was found to suppress reaction intensity, and reaction heat at 10 W is one sixth of that at 2.5 W, attributed to rapid product layer densification and the possible steam-film barrier effect shifting the controlling mechanism from chemical to diffusion control. A coupled multifactorial predictive model incorporating the three factors was established with a correlation coefficient R2 of 0.92, providing a theoretical basis and practical guidance for hazard assessment and safe storage of aluminium powder.