Moon-Kyeong Jang

Dr. Moon-Kyeong Jang


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2024 in Agriculture
Verified
Journal Article
Open access
PDF file
MJMoon-Kyeong Jang
Moon-Kyeong Jang
SKSeung-Jun Kim
Seung-Jun Kim
BSBeom-Soo Shin
Beom-Soo Shin
Ju Seok NamJu Seok Nam
Ju Seok Nam
Tractor accidents caused by lateral overturning and backward rollover during agricultural activities and general driving are common. In this study, various research cases were analyzed to identify the factors influencing the lateral overturning and backward rollover of tractors and to examine their static and dynamic stability. Studies on the analysis of the major causes of these incidents and evaluation of tractor safety were compiled. Test methods, including actual tests and simulations, were categorized, and the characteristics of lateral overturning and backward rollover safety of tractors in different studies were examined. Additionally, safety improvement measures were proposed by identifying and summarizing the causes of accidents involving agricultural machinery. Tractor safety was evaluated primarily by conducting actual tractor and simulation tests. These tests were classified into field tests, tests on scale models, spreadsheet programs, and 3D simulation programs. The primary causes of lateral overturning and backward rollover were unstable center of gravity, extremely high driving speed, and ground conditions. Given the considerable number of studies dedicated to evaluating tractor safety, various technologies aimed at preventing lateral overturning and backward rollover incidents are expected to be applied to tractors in the future. The production and testing of safe agricultural machinery are expected to contribute to a reduction in accident rates.

28 February 2023 in Agriculture
Verified
Journal Article
Open access
PDF file
SMSri Markumningsih
Sri Markumningsih
Seok-Joon HwangSeok-Joon Hwang
Seok-Joon Hwang
JKJeong-Hun Kim
Jeong-Hun Kim
MJMoon-Kyeong Jang
Moon-Kyeong Jang
CSChang-Seop Shin
Chang-Seop Shin
Ju Seok NamJu Seok Nam
Ju Seok Nam
The consumed power and safety of cam and four-bar-link semi-automatic vegetable transplanters were analyzed and compared according to the engine speed and planting distances. A measurement system was constructed to obtain the torque, rotational speed, and strain at the corresponding locations of both transplanters. Field tests were conducted at three engine speeds and three planting distances for each type of transplanter. The torque and rotational speed data of the input shaft of the transplanting devices were used to calculate the power consumed during transplanting. The strain data were converted into stress values to calculate the static safety factor and fatigue life. The results show that the torque and consumed power of the cam transplanter were greater than those of the four-bar-link transplanter under similar operational conditions, owing to its rigid and heavier design. The consumed power increased as the engine speed increased for both types. The static safety factor and fatigue life exhibited different values depending on the measurement location with a sufficient safety margin. Although more skill is required in planting distance control owing to its manual adjustment, the four-bar-link type is more economical under similar operating conditions because of its smaller power requirement.

26 December 2023 in Agriculture
Verified
Journal Article
Open access
PDF file
SMSri Markumningsih
Sri Markumningsih
Seok-Joon HwangSeok-Joon Hwang
Seok-Joon Hwang
JKJeong-Hun Kim
Jeong-Hun Kim
MJMoon-Kyeong Jang
Moon-Kyeong Jang
Ju Seok NamJu Seok Nam
Ju Seok Nam
The aim of this study is to analyze the stress exerted on a four-bar link-type transplanting device using two distinct methods: stress measurement performed during a field test and stress simulation. A field test is conducted to measure stress using a strain gauge positioned at 15 specific points on the transplanting device. Subsequently, the measured strain data are converted into calculated stress data. In another method, stress is simulated using specialized multibody dynamic simulation software. The simulation results are compared with the stress measured during field tests to verify the simulation model. Based on the results, the maximum stress derived from the simulation correlates with the measured results, although notable discrepancies are shown, particularly at strain gauge positions 11 and 13. The maximum stress derived from the simulation is used to calculate the static safety factor of the transplanting device. The peak stress derived from the simulation aligns with the measured results, although significant discrepancies are observed at positions corresponding to strain gauges 4 and 10. The maximum stress (150.82 MPa) is observed on the link of the transplanting device, and the static safety factor determined via the simulation is 1.39.

27 October 2023 in Agriculture
Verified
Journal Article
Open access
PDF file
JKJeong-Hun Kim
Jeong-Hun Kim
SMSri Markumningsih
Sri Markumningsih
Seok-Joon HwangSeok-Joon Hwang
Seok-Joon Hwang
MJMoon-Kyeong Jang
Moon-Kyeong Jang
SKSeung-Jun Kim
Seung-Jun Kim
Ju Seok NamJu Seok Nam
Ju Seok Nam
In this study, to evaluate the safety of the fastening device, which is a vulnerable part of the agricultural by-product collector, the stress in fastening devices was measured, and the operational and driving safety were analyzed by deriving the static safety factor and fatigue life. The position with the maximum stress in fastening devices was identified through structural analysis simulation, and a stress measurement system was constructed using strain gauges. Test conditions for stress measurement were classified into three operating conditions (collection operation, driving with the loading part lifted to the highest point, and driving with the loading part lifted to the lowest point) and three soil conditions (even pavement, sloped pavement, and farmland). A process for deriving the fatigue life based on the measured stress was constructed by applying the rain-flow counting method, Goodman equation, and Palmgren–Miner’s rule via commercial software. From the stress measurement results, the collection operation exhibited the highest maximum stress, followed by driving with the loading part lifted to the highest point and driving with the loading part lifted to the lowest point. Under all conditions, the static safety factor of the fastening devices was found to be higher than 1.0 (1.16–1.33). The fatigue life of the fastening devices was also found to be longer than the service life of Korean agricultural machinery under all operating conditions. Therefore, the fastening devices are expected to operate safely under generated static and dynamic loads. The agricultural by-product collector can perform agricultural work and drive stably and is expected to contribute to reducing unnecessary labor force for Korean farms.

6 November 2024 in Agriculture
Verified
Journal Article
Open access
PDF file
SKSeung-Jun Kim
Seung-Jun Kim
MJMoon-Kyeong Jang
Moon-Kyeong Jang
Seok-Joon HwangSeok-Joon Hwang
Seok-Joon Hwang
Won Suk LeeWon Suk Lee
Won Suk Lee
Ju Seok NamJu Seok Nam
Ju Seok Nam
Tractor fuel consumption has typically been predicted using indoor test results under specific conditions. This study analyzes the factors affecting fuel consumption during rotary tillage in actual fields and develops a prediction model. The test field was divided into sections using a grid method, and rotary tillage operations were performed to measure various parameters, including soil strength, tractor’s transmission and PTO gear stages, tillage pitch, travel speed, engine and PTO shaft torque and speed, and fuel consumption. Pearson correlation identified variables affecting specific fuel consumption, and regression analysis was used to develop a prediction model. The model’s accuracy was analyzed using the coefficient of determination (R2) and root mean square error (RMSE), and it was compared with the ASABE’s fuel consumption prediction model. The test results showed that higher transmission and PTO gear stages, and tillage pitch decreased specific fuel consumption, while soil strength had no significant effect. Thus, operating at higher gear and PTO stages within suitable conditions enhances energy efficiency in rotary tillage. Statistical analysis showed that specific fuel consumption significantly correlated with tractor travel speed, PTO shaft power, and PTO shaft speed. The prediction model, including these variables, had the highest accuracy with R2 of 0.91 and RMSE of 0.011 L/kW·h. The developed prediction model showed significantly improved accuracy compared to the ASABE model, indicating that it can predict specific fuel consumption based on key operational variables in actual rotary tillage operations.

21 December 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MJMoon-Kyeong Jang
Moon-Kyeong Jang
Seok-Joon HwangSeok-Joon Hwang
Seok-Joon Hwang
CSChang-Seop Shin
Chang-Seop Shin
Ju Seok NamJu Seok Nam
Ju Seok Nam
In this study, we have conducted a quasi-static lateral overturning test and derived a static falling down sidelong angle by using a miniature tractor model. We analyzed the lateral overturning condition of tractors theoretically by literature review and derived a method to manufacture a miniature model based on the analysis result. A miniature model was manufactured using a 3D printer at a scale of 1/20, relative to the actual dimension of a tractor. In addition, a test platform was constructed to perform lateral overturning tests. The miniature model was placed on the test platform, and the inclination angle of the ground was gradually increased. Then the static falling down sidelong angle, that is the inclination angle at the moment of lateral overturning occurred, was measured. The test result indicated that the difference of average static falling down sidelong angle was 1.0%. comparing to the accredited certification test result of the original tractor. Therefore, by utilizing the method applied in this study, the static falling down sidelong angle of tractors could be derived quickly and conveniently from a miniature model. As future research, the in-depth verification for the developed method is required by applying to a variety of agricultural machines.