A fully integrated piezoelectric energy harvesting interface is proposed for harvesting energy from irregular human motion. To handle irregular pulse inputs generated by the piezoelectric transducer (PZT), the proposed harvesting interface includes a wake-up controller that activates the harvesting interface only when human motion is detected and deformation is applied on the piezoelectric material, thereby keeping static power loss low. The PZT output voltage is increased to its peak voltage by removing any type of external load capacitance seen by the PZT during its deformation. Once the peak voltage is detected, a multi-voltage conversion-ratio-based switched-capacitor circuit is activated to transfer PZT-generated energy to the battery in multiple ratio steps to maximize the conversion efficiency, with the help of a carefully designed harvesting controller. To deal with open-circuit voltages (V_OCS) higher than the maximum voltage tolerated (V_MAX) by available technology, capacitive partial electric charge extraction is activated every time the PZT output voltage approaches the V_MAX. The proposed harvesting interface extracts 3.37 times more energy than a conventional full-bridge rectifier-based harvesting scheme.

Advancements in low power circuits and batteries have enabled the design of miniature sensors with tiny batteries. In such systems, implementing dynamic voltage scaling (DVS) is crucial for maximizing system lifetime. In this paper, a new switched capacitor (SC) converter that is capable of handling a wide range of load currents and output voltages is presented for on-chip DVS implementation. The proposed converter consists of multi-ratio multi-leaf SC stages and reconfigurable interconnect, enabling fine voltage resolution. The stage interconnect scheme enables cascaded or parallel connection of stages. The multi-leaf structure allows load-dependent switch size selection, offering a better trade-off between losses over a wide load range. A limited-voltage-swing switch-driving scheme allows efficient down-conversion from high battery voltage input. A prototype was fabricated in a 180 nm process, providing an output voltage with effective resolution of 16 mV over a load current range of 300 nA to 300 μA (1000×) from a 4 V battery. Efficiency greater than 62% and a peak efficiency of 77% are achieved under a light load (500 nA) over a voltage range of 400 mV to 1.6 V. Efficiency greater than 64% and a peak efficiency of 72% are achieved under a heavy load (200 μA) over a voltage range of 700 mV to 1.6 V.

An energy-harvesting interface for kinetic energy harvesting from high-voltage piezoelectric and triboelectric generators is proposed in this paper. Unlike the conventional kinetic energy-harvesting interfaces optimized for continuous sinusoidal input, the proposed harvesting interface can efficiently handle irregular and random high voltage energy inputs. An N-type mosfet (NMOS)-only power stage design is introduced to simplify power switch drivers and minimize conduction loss. Controller active mode power is also reduced by introducing a new voltage peak detector. For efficient operation with potentially long intervals between random kinetic energy inputs, standby power consumption is minimized by monitoring the input with a 43 pW wake-up controller and power-gating all other circuits during the standby intervals. The proposed harvesting interface can harvest energy from a wide range of energy inputs, 10 s of nJ to 10 s of µJ energy/pulse, with an input voltage range of 5–200 V and an output range of 2.4–4 V under discontinuous as well as continuous excitation. The proposed interface is examined in two scenarios, with integrated power stage devices (maximum input 45 V) and with discrete power stage devices (maximum input 200 V), and the harvesting efficiency is improved by up to 600% and 1350%, respectively, compared to the case when harvesting is performed with a full bridge rectifier.

A novel harvesting interface for multiple piezoelectric transducers (PZTs) is proposed for high-voltage energy harvesting. Pre-biasing a PZT prior to its mechanical deformation increases its damping force, resulting in higher energy extraction. Unlike the conventional harvesters where a PZT-generated output is assumed to be continuous sinusoidal and output polarity is assumed to be alternating every cycle, PZT-generated output from human motion is expected to be random. Therefore, in the proposed approach, energy is invested to the PZT only when PZT deformation is detected. Upon the motion detection, energy stored at a storage capacitor (C_STOR) from earlier energy harvesting cycle is invested to pre-bias PZT, enhancing energy extraction. The harvested energy is transferred to back C_STOR for energy investment on the next cycle and then excess energy is transferred to the battery. In addition, partial electric charge extraction (PECE) is adapted to extract a partial amount of charges from the PZT every time its voltage approaches the process limit of 40 V. Simulations with 0.35 µm BCD process show 7.61× (with PECE only) and 8.38× (with PECE and energy investment) improvement compared to the conventional rectifier-based harvesting scheme Proposed harvesting interface successfully harvests energy from excitations with open-circuit voltages up to 100 V.

A new recursive output connection switchedcapacitor (SC) DC-DC converter for high-voltage harvesters is proposed in this paper. The novel architecture of the recursive output connections in each SC stage significantly reduces the conduction loss, which is the dominant loss in cascaded SC converters for low conversion ratios. Four configurable-ratio SC stages are connected through configurable series/parallel stage interconnect, which provides a wide range of harmonic conversion ratios ranging from 1/3 to 1/13. The proposed SC converter is fabricated in 0.35μm high-voltage CMOS process, achieving efficient operation over an input voltage range of 17V to 45V and wide output power range of 25μW to 10mW with peak efficiency of 90.2%. Load and line regulation is provided by a two-step controller, which periodically tracks the optimal conversion ratio and switching frequency.