Undoped nickel oxide (NiO) thin films were deposited on 500°C heated glass substrates using spray pyrolysis method at (0.015–0.1 M) range of precursor. The latter was obtained by decomposition of nickel nitrate hexahydrate in double distilled water. Effect of precursor concentration on structural, optical, and electrical properties of NiO thin films was investigated. X-ray diffraction (XRD) shows the formation of NiO under cubic structure with single diffraction peak along(111)plane at. When precursor concentration reaches 0.1 M, an increment in NiO crystallite size over 37.04 nm was obtained indicating the product nano structure. SEM images reveal that beyond 0.04 M as precursor concentration the substrate becomes completely covered with NiO and thin films exhibit formation of nano agglomerations at the top of the sample surface. Ni-O bonds vibrations modes in the product of films were confirmed by FT-IR analysis. Transparency of the films ranged from 57 to 88% and band gap energy of the films decreases from 3.68 to 3.60 eV with increasing precursor concentration. Electrical properties of the elaborated NiO thin films were correlated to the precursor concentration.
In this paper, the adsorption of Evans blue (EB) and methyl orange (MO) azo dyes on four greenly synthesized magnetite nanoparticles has been studied to investigate the effect of the mediating plant extract's acidity on magnetite surface reactivity in azo dye adsorption. Magnetite surface reactivity has been studied through the analysis of preferential attachment of dye chromophore and auxochrome groups on magnetite nanoparticles, and adsorption yields. According to the contents of chromophore and auxochrome groups in dye structures, the mediating plant extract's acidity effect on acid site types and densities was also deduced. Used plants for the green synthesis were: Artemisia herba-alba (L), Matricaria pubescens (L), Juniperus phoenicea (L), and Rosmarinus officinalis (L), and their extract pHs were respectively 5.25, 5.05, 4.63, and 3.69. The four greenly synthesized samples of magnetite were characterized by XRD, SEM, ATR-FTIR, and UV-Vis techniques. The novelty of this paper lies in highlighting the influence of the mediating plant extract's acidity on the greenly synthesized magnetite surface reactivity towards the preferential attachment of chromophore and auxochrome functional groups in azo dye adsorption, where obtained results show that the mediating plant extract's acidity has a clear effect on the preferential attachment of chromophore and auxochrome groups on magnetite surfaces as well as on azo dyes' adsorption yields and capacities. Indeed, the decrease in the plant extract's acidity leads to an increase in the attachment of chromophore groups and a decrease in the attachment of auxochrome groups. So, it leads to an increase in Lewis acid site density and a decrease in Brønsted acid site density of magnetite surfaces. Also, the decrease of the plant extract's acidity leads to an increase in the studied dye adsorption yields, and this is because the majority of functional groups of MO and EB dyes are chromophores that attach to Lewis acid sites. The difference found in adsorption yields of EB and MO on all four magnetite samples is due to the fact that the ratio of chromophore/auxochrome groups in EB is remarkably greater than that in MO. The linear and non-linear pseudo-first-order and pseudo-second-order kinetics of the adsorption as well as the intra-particle diffusion mechanism have been analyzed. Obtained results indicate that in all adsorption processes the adsorption kinetics followed a linear pseudo-first-order kinetic model, and film diffusion is the step that controlled adsorption mechanisms. The thermodynamic studies of EB and MO adsorption processes on the four magnetite surfaces have been analyzed in the temperature range of 303.15–318.15 K. Obtained results reveal the endothermic nature of the adsorption in all cases.
8 September 2021 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Helicoidal water-air geothermal heat exchanger (HWAGHE) uses the water well as a heat source/sink for air refreshing purposes in space. It has been exploited as a passive technique to minimize the energy uses in buildings. This work goals to estimate the energy and exergy characteristics of HWAGHE for arid zone weather condition of Algeria. The helicoidally geometry enhancing the heat exchange with the soil is chosen to decrease the operating cost and the needed area. The studied HWAGHE was constructed from a flexible PVC pipe with 30 m length and 0.6 m diameter. It was immersed into a drilled borehole with 1 m diameter and 5 m depth. The heat exchange rate with the ground and exergy and energy efficiencies of HWAGHE is evaluated. Experimental findings revealed that the inlet ambient temperature has a considerable impact on the HWAGHE performances mainly when the change in temperature between the ambient and the water well increments. Maximal exergy and energetic efficiencies of the HWAGHE, reaching 89% and 92%, respectively, are obtained at 0.035 kg s−1 mass flow rate.
Magnetite NP samples synthesized from less acidic plant extracts have more dense active sites and prefer adsorbing more MG. The increase of plant extract acidity leads to the increase of the thermo- and photocatalytic activities of Fe3O4NPs.
The efficient removal of toxic dyes from wastewater remains a major environmental challenge. In this study, we report a green and facile one-pot synthesis of zinc oxide nanowires (ZnO-NWs) using lemon verbena leaf extract as a sustainable capping and stabilizing agent. The extract played a vital role in directing the 1D growth of the wurtzite hexagonal structure. Characterization confirmed a band gap of 3.12 eV and the characteristic Zn-O stretching at 375 cm−1. Photocatalytic activity tests using 20 mg of biosynthesized ZnO-NWs demonstrated excellent degradation performance. A rate constant of 0.0067 min−1 was achieved, with 99.95% degradation of Basic Fuchsin under natural sunlight for 3 h. Active species analysis highlighted the crucial roles of holes (h+), superoxide radicals (O2•−), and hydroxyl radicals (•OH). Notably, the addition of 10 mM H2O2 produced a powerful synergistic effect, reducing the degradation time from 3 h to only 7 min and increasing the reaction rate by approximately 25-fold. These findings highlight the potential of biosynthesized ZnO-NWs as highly efficient, rapid, and sustainable photocatalysts for environmental remediation.
Correction for ‘A novel study on the preferential attachment of chromophore and auxochrome groups in azo dye adsorption on different greenly synthesized magnetite nanoparticles: investigation of the influence of the mediating plant extract's acidity’ by Kaouthar Ahmouda et al. , Nanoscale Adv. , 2022, 4 , 3250–3271, DOI: https://doi.org/10.1039/D2NA00302C.