In the current work, a novel 2D numerical model of stationary grids was developed for reciprocating magnetic refrigerators, with Gd plates, in which the magneto-caloric properties, derived from the Weiss molecular field theory, were adopted for the built-in energy source of the magneto-caloric effect. The numerical simulation was conducted under the conditions of different structural and operational parameters, and the effects of the relative fluid displacement (φ) on the specific refrigeration capacity (qref) and the Coefficient of Performance (COP) were obtained. Besides the variations of entropy, the generation rate and number were studied and the contours of the local entropy generation rate are presented for discussion. From the current work, it is found that with an increase in φ, both the qref and COP followed the convex variation trend, while the entropy generation number (Ns) varied concavely. As for the current cases, the maximal qref and COP were equal to 151.2 kW/m3 and 9.11, respectively, while the lowest Ns was the value of 2.4 × 10−4 K−1. However, the optimal φ for the largest qref and COP, and for the lowest Ns, were inconsistent, thus, some compromises need be made in the optimization of magnetic refrigerators.
In high-speed parachuting, complex turbulent phenomena (i.e., deadly vortices) may cause problems such as parachute inflation delay or even deployment failure. To address these issues, this study develops a high-precision numerical simulation dummy model in which adaptive mesh generation techniques, combined with Euler–Lagrange bidirectional coupling based on a large eddy simulation, are employed to model the multiphase flow field during parachute descent. The key parameters are adjusted, and the numerical model is refined based on wind tunnel experiments and User-Defined Functions. The bidirectional validation of the experimental and simulated data reveals the mechanism of turbulent flow formation and its evolutionary patterns around the parachutist–parachute system for different lateral and descent velocities during the high-speed descent phase. A prediction model based on a multi-information fusion neural network algorithm is further established to address the challenge in special parachuting scenarios whereby vortices in the flow field around the parachutist prevent the parachute from opening. The model integrates the Haar wavelet to extract global low-frequency features that characterize the overall structure and trends, an energy valley optimization algorithm, a convolutional neural network, a bidirectional long short-term memory network, and a self-attention mechanism to achieve one-second-ahead turbulence prediction. With nine physical quantities as inputs and descent velocity as the output indicator, the model has a Root Mean Square Error of 0.085, a Mean Absolute Error of 0.051, and a Mean Absolute Percentage Error of 0.0021.
To mitigate impact damage to airdropped supplies during landing, this study proposes a cushioning pad design method based on the C − σm (cushioning coefficient–maximum stress) curve, aiming to balance energy absorption efficiency with lightweight requirements. A medium-sized airdrop impact simulation model is established and validated via drop impact tests, and systematic dynamic impact analyses are performed on three representative cushioning materials: honeycomb paperboard, polyurethane foam, and aluminum foam. Their cushioning characteristic curves are compared, revealing that all three materials exhibit a concave C − σm profile (first decreasing, then increasing) with distinct optimal stress ranges for airdrop cushioning applications: aluminum foam for high stress (≥500 kPa), polyurethane foam for medium stress (350–450 kPa), and honeycomb paperboard for low stress (≤200 kPa). The energy absorption potential decreases with the optimal stress threshold, while cushion thickness positively correlates with the airdrop load range. In the low-stress stage, the maximum stress shows a strong functional dependence on energy density, rendering thickness effects negligible for energy absorption. Under the material fragility constraint, the C − σm curve-based graphical method can accurately determine the cushion pad’s optimal thickness and bearing area. In design Case 3, optimizing the bearing area reduced the required cushion thickness from 100.5 cm to 25.0 cm, substantially decreasing the cushion volume. The findings provide reliable material-level insights and theoretical support for impact protection design in airdrop cargo, with clear guidance on selecting cushioning materials based on their intrinsic mechanical response.
23 September 2025 in Aerospace Science and Technology