Semiconductor metal oxides (SMOxs) are widely used in gas sensors due to their excellent sensing properties, abundance, and ease of manufacture. The best examples of these sensing materials are SnO₂ and TiO₂ that have wide band gap and offer unique set of functional properties; the most important of which are electrical conductivity and high surface reactivity. There has been a constant development of SMOx sensor materials in the literature that has been accompanied by the improvement of their gas-sensitive properties for the gas detection. This review is dedicated to compiling of these efforts in order to mark the achievements in this area. The main material-specific aspects that strongly affect the gas sensing properties and can be controlled by the synthesis method are morphology/nanostructuring and dopants to vary crystallographic structure of MOx sensing material.

In the past decade, MXenes, a new class of advanced functional 2D nanomaterials, have emerged among numerous types of electrode materials for electrochemical energy storage devices. MXene and their composites have opened up an interesting new opportunity in the field of functional materials, owing to their transition metal nitrides/carbides/carbonitride-based unique layered structures, higher electrical and thermal conductivity, higher charge carrier mobility, high negative zeta-potential, high mechanical properties, tunable bandgap, superior hydrophilicity, metallic nature and rich surface chemistry, which enhance the number of metal active redox sites on the surface and short ion diffusion path. However, in the case of electrochemical energy storage applications, the unavoidable problem of aggregation and nanosheet restacking significantly reduces the accessibility of the active surface sites of MXene materials for electrolyte ions. Currently, there is a number of research efforts devoted to solutions in order to avoid these deficits. This Review complies extensively with the recent advances in the application of MXene-based materials in the energy storage devices such as batteries and supercapacitors. Particular attention is paid to the understanding of the relation of MXenes chemical composition, and morphology with their electrochemical performances. Moreover, the challenges of MXenes and MXene-based composited for the commercial application are considered and the ways to overcome their drawbacks are provided. Finally, opportunities given with MXenes for future research on novel energy storage materials are highlighted.

Nowadays, the rapid development and demand of high-performance, lightweight, low cost, portable/wearable electronic devices in electrical vehicles, aerospace, medical systems, etc., strongly motivates researchers towards advanced electrochemical energy storage (EES) devices and technologies. The electrolyte is also one of the most significant components of EES devices, such as batteries and supercapacitors. In addition to rapid ion transport and the stable electrochemical performance of electrolytes, great efforts are required to overcome safety issues due to flammability, leakage and thermal instability. A lot of research has already been completed on solid polymer electrolytes, but they are still lagging for practical application. Over the past few decades, ionic liquids (ILs) as electrolytes have been of considerable interest in Li-ion batteries and supercapacitor applications and could be an important way to make breakthroughs for the next-generation EES systems. The high ionic conductivity, low melting point (lower than 100 °C), wide electrochemical potential window (up to 5–6 V vs. Li⁺/Li), good thermal stability, non-flammability, low volatility due to cation–anion combinations and the promising self-healing ability of ILs make them superior as “green” solvents for industrial EES applications. In this short review, we try to provide an overview of the recent research on ILs electrolytes, their advantages and challenges for next-generation Li-ion battery and supercapacitor applications.

The rapidly developing demand for lightweight portable electronics has accelerated advanced research on self-powered microsystems (SPMs) for peak power energy storage (ESs). In recent years, there has been, in this regard, a huge research interest in micro-supercapacitors for microelectronics application over micro-batteries due to their advantages of fast charge–discharge rate, high power density and long cycle-life. In this work, the optimization and fabrication of micro-supercapacitors (MSCs) by means of laser-induced interdigital structured graphene electrodes (LIG) has been reported. The flexible and scalable MSCs are fabricated by CO₂-laser structuring of polyimide-based Kapton ^® HN foils at ambient temperature yielding interdigital LIG-electrodes and using polymer gel electrolyte (PGE) produced by polypropylene carbonate (PPC) embedded ionic liquid of 1-ethyl-3-methyl-imidazolium-trifluoromethansulphonate [EMIM][OTf]. This MSC exhibits a wide stable potential window up to 2.0 V, offering an areal capacitance of 1.75 mF/cm² at a scan rate of 5.0 mV/s resulting in an energy density (E_a) of 0.256 µWh/cm² @ 0.03 mA/cm² and power density (P_a) of 0.11 mW/cm² @0.1 mA/cm². Overall electrochemical performance of this LIG/PGE-MSC is rounded with a good cyclic stability up to 10,000 cycles demonstrating its potential in terms of peak energy storage ability compared to the current thin film micro-supercapacitors.

This paper provides a summary of the recent developments with promising 2D MXene-related materials and gives an outlook for further research on gas sensor applications. The current synthesis routes that are provided in the literature are summarized, and the main properties of MXene compounds have been highlighted. Particular attention has been paid to safe and non-hazardous synthesis approaches for MXene production as 2D materials. The work so far on sensing properties of pure MXenes and MXene-based heterostructures has been considered. Significant improvement of the MXenes sensing performances not only relies on 2D production but also on the formation of MXene heterostructures with other 2D materials, such as graphene, and with metal oxides layers. Despite the limited number of research papers published in this area, recommendations on new strategies to advance MXene heterostructures and composites for gas sensing applications can be driven.

This paper aims to provide a large coverage of recent developments regarding environmental monitoring using metal oxide-based sensors. Particular attention is given to the detection of gases such as H₂, CO_x, SO_x, NO_x, and CH₄. The developments and analyses of the design of sensors and types of metal oxide sensing materials are emphasized. The sensing mechanisms and peculiarities of metal oxides used in chemoresistive sensors are provided. The main parameters that affect the sensitivity and selectivity of metal oxide sensors are indicated and their significance to the sensor signal is analyzed. Modern data processing algorithms, employed to optimize the measurement process and processing of the sensor signal, are considered. The existing sensor arrays/e-nose systems for environmental monitoring are summarized, and future prospects and challenges encountered with metal oxide-based sensor arrays are highlighted.