The current paper reviews a set of principles and applications of photoacoustic and laser ultrasonic imaging, developed in the Laser Optoacoustic Laboratories of ILIT RAS, NUST MISiS, and ILC MSU. These applications include combined photoacoustic and laser ultrasonic imaging for biological objects, and tomographic laser ultrasonic imaging of solids. Principles, algorithms, resolution of the developed methods, and related problems are discussed. The review is written in context of the current state-of-art of photoacoustic and laser ultrasonic imaging.
We describe a universal system for research in combined real-time optoacoustic (OA) and laser-ultrasonic (LU) imaging. The results of its testing on the task of needle insertion into the blood vessel model diagnostics are presented. In OA mode, where laser light is absorbed directly in the sample, the contents of blood vessel model is clearly visible. In LU mode, where the short ultrasonic probe pulse scattered on the sample is detected, the needle is clearly visible. The developed solution combining OA and LU imaging modalities due to the common detection system allowed real-time diagnostics of the position of medical needles (0.63 mm and 0.7 mm in diameter) inside blood vessel models (1.6 mm and 2.4 mm in diameter). Frame rate was 10 Hz. High longitudinal spatial resolution of the system - 0.1 mm - allows distinguishing the two walls of the vessel model and the position of the needle inside.
We propose to use optoacoustic tomography to study the characteristics of femtosecond laser filamentation in air and condensed matter. The high spatial resolution of the proposed system, which consists of an array of broadband megahertz piezoelectric elements, ensures its effectiveness, despite the attenuation of ultrasonic waves in air.
The problem of surface processing and microstructure refinement in stainless steels in laser surface processing in the presence of an external magnetic field has been studied experimentally and theoretically. The effect of both alternating and permanent magnetic fields is discussed. The experimental part includes microstructure assessment of a thin stainless plate annealed by a quasi-continuous laser in the presence of an electromagnetic acoustic transducer. Complementary analytical calculus and numerical simulations of complex transport phenomena in the melting zone are performed. Based on the received data, the effect of the electromagnetic field on the molten zone under laser melting conditions is evaluated and quantified. The obtained results are relevant to laser surface hardening and additive manufacturing.
The spatial resolution and size of the sensitivity area of tomographic systems are estimated by calculating sensitivity maps and spatial resolution maps in the image plane of complex arrays. The...
21 December 2018 in Journal of Physics: Conference Series
The semi-analytical technique for calculating the acoustic response of a femtosecond filament accounting for acoustic attenuation in water and refraction at a plane boundary is proposed. The technique uses the approximation of geometrical acoustics and an analytical solution of wave equation for 2D Gaussian source in lossless medium modified to account for acoustic attenuation. The response calculated using the proposed approximated formulas agrees with the one calculated using k-space pseudospectral method within 1% accuracy and correlates with the waveform obtained in experiments with Cr:Forsterite laser and a wideband lithium niobate piezosensor. The geometrical acoustic approach is used to modify the back-projection algorithm for the corresponding inverse problem of PA tomography. The experimental PA image of a filament is presented.