To quickly obtain the fatigue life of cranes in service, the metal structure that determines the crane life is anchored. Meanwhile, the fast prediction method of fatigue life of crane metal structures based on the Stacking ensemble learning model is proposed. Firstly, in line with the structural stress method, the global rough model of the metal structure is established by the co-simulation technology to obtain the fatigue damage regions of the structure. The local fine model is constructed by local cutting and boundary condition transplantation to determine the critical weld at the failure regions. Secondly, through weld definition, equivalent structural stress acquisition, and fatigue life calculation, the sample data set with lifting load and trolley running position as input and fatigue life cycle times as output is constructed. Then, the Stacking integrated learning model combining gradient boosting, ridge regression, Extra Trees, and linear is built. On this basis, combined with the Miner theory, the rapid prediction of crane fatigue life is realized. Finally, the proposed method is applied to the QD40t × 22.5 m × 9 m general bridge crane. The results show that the life sample set constructed by the structural stress method is more accurate and reasonable than the nominal, hot spot, and fracture mechanics methods. The life prediction results of the Stacking integration model were improved by 6.3 to 49.2% compared to the single model. The method has theoretical and practical significance in reducing accidents and ensuring the safe operation of cranes.
The expeditious and precise prediction of stress variations in nonlinear boom structures is paramount for ensuring the safe, dependable, and effective operation of pump trucks. Nonetheless, balancing prediction accuracy and efficiency by constructing a suitable machine-learning model remains a challenge in engineering practice. To this end, this paper introduces an interpretable fusion model named RS–XGBoost–RF (Random Search–Extreme Gradient Boosting Tree–Random Forest) and develops an intelligent algorithm for the stress prediction of the nonlinear boom structure of concrete pump trucks. Firstly, an information acquisition system is deployed to collect relevant data from the boom systems of ZLJ5440THBBF 56X-6RZ concrete pump trucks during its operational phase. Data pre-processing is conducted on the 2.4 million sets of acquired data. Then, a sample dataset of typical working conditions is obtained. Secondly, the RS algorithm, RF model, and XGBoost model are selected based on their complementary strengths to construct the fusion model. The model fusion condition is established with a focus on prediction efficiency. By leveraging the synergy between search and prediction mechanisms, the RS–XGBoost model is constructed for the prediction of the master hyperparameters of the RF model. This model uses the random search (RS) process to obtain the mapping between the loss function and the hyperparameters. This mapping relationship is then learned using the XGBoost model, and the hyperparameter value with the smallest loss value is predicted. Finally, the RS–XGBoost–RF model with optimized hyperparameters is employed to achieve rapid stress prediction at various detection points of the nonlinear boom structure. The findings demonstrate that, within the acceptable prediction efficiency for engineering practice, the fitting accuracy (R2) of the RS–XGBoost–RF model consistently exceeds 0.955 across all measurement points, with only a few exceptions. Concerning the stress magnitudes themselves, the mean absolute error (MAE) and root mean square error (RMSE) are maintained within the ranges of 2.22% to 3.91% and 4.79% to 7.85%, respectively. In comparison with RS–RF–RF, RS–RF–XGBoost, and RS–XGBoost–XGBoost, the proposed model exhibits the optimal prediction performance. The method delineated in this paper offers valuable insights for expeditious structural stress prediction in the realm of inherent safety within construction machinery.
To determine the influence of temperature on the mechanical properties of crane metal structures, three Q355 alloy steel samples were processed and their elastic moduli were tested at different temperatures using a metal tension test bed. The constitutive equation for the elastic modulus of Q355 alloy steel at different temperatures was predicted using test data and a neural network algorithm. Based on crane structural characteristics and the principle of system dynamics, a coupling vibration model was established that included the crane flexible girder, cabin, trolley, crane, and temperature. System motion equations were established according to the Lagrange equation, and the approximate solution of nonlinear system vibration was solved by the direct integration method (the Newmark method). The dynamic characteristics of the main beam and cabin were analyzed at different temperatures, as well as safety during service. The results show that, with increasing temperature, the maximum midspan displacement of the main beam increases gradually, by 14.3%, 21.4%, and 57.1% at temperatures of 300°C, 400°C, and 600°C, respectively. The cabin vibration displacement increases with temperature, by up to 32.5% at 600°C, but the influence of temperature on cabin vibration acceleration is not obvious. It was concluded that the influence of temperature on the dynamic characteristics of the main beam must be considered during the design stage of cranes. The proposed model and analysis method provide a theoretical basis for the design of casting cranes according to temperature.
The service process of the pump truck typically requires subjective control of the folding boom to achieve the desired pouring position. However, such the posture of the boom controlled by the operator’s experience, can lead to additional fatigue damage, ultimately reducing the fatigue life of the boom structure. To address this issue, this paper proposes a posture configuration optimization method for folding booms of the pump truck under life extension control. A multifunctional integrated system platform has also been developed. First, the dataset of “behavioral-performance” characteristics for the folding booms of the pump truck is obtained using a synergistic method of “acquisition-simulation-correction”. After evaluating the fatigue life, the dataset is transformed into a fatigue life sample dataset. The Extra Trees model, enhanced by Bayesian Optimization, is then developed to realize rapid predictions of fatigue life for various boom postures. Second, the posture configuration optimization model for the boom is developed with two primary objectives: maximizing fatigue life and minimizing the distance between the end of the boom and the pouring point. Subsequently, the optimization model is solved using the improved Ant Colony Algorithm. This configuration optimization yields the optimal boom posture for a specific pouring point. Finally, the “posture configuration system for the folding booms of the pump truck under life extension control” is constructed through algorithm encapsulation and function integration. This system provides a visual and interactive intelligent computing platform for the aforementioned processes.
8 November 2022 in Journal of the Brazilian Society of Mechanical Sciences and Engineering