The structural vibration of the main beam of a crane causes fatigue damage and discomfort to the driver. The swing of the payload has an effect on positioning precision, especially for a ladle crane, and this directly affects production safety. To study the influence of system parameters on the vibration of a crane’s main beam and the angle of the payload, a system consisting of the main beam, trolley, payload, and cabin was constructed. A rigid-flexible coupling dynamic model of a moving trolley with a hanging payload that moves on the flexible main beam with a concentrated cabin mass is established, and the direct integration method is used to solve the nonlinear differential equations of system vibration, which are obtained through Lagrange’s equation. Then, the time domain responses of the flexible main beam, payload angle, and cabin vibration are obtained. The influences of the trolley running speed, quality of the payload, and quality and position of the cabin on the vibration of the main beam and payload angle are analyzed. The results indicate that the amplitude of the main beam is directly proportional to the quality of the trolley, payload, and cab; the position of the cabin is closer to the mid-span; the amplitude of the main beam is larger; the structural damping has some influence on the vibration of the main beam; and the swing angle of the payload is related to the maximum running speed of the trolley, acceleration time, and length of the wire rope. In order to reduce the vibration of the main beam and cabin, the connection stiffness of the cabin should be ensured during installation.
12 October 2021 in Advances in Mechanical Engineering
At present, there are some problems that need to be solved in crane steel structure design, such as heavy self-weight of finished structure, high production energy consumption, and huge manufacturing costs. In view of this, a lightweight design method that meets the green product design principle is proposed for crane structure. In this method, an improved new swarm intelligence optimization algorithm named the multi-specular reflection algorithm (M-SRA) is proposed. This algorithm combines the specular reflection algorithm (SRA) with the traditional swarm intelligence optimization algorithm, which has higher computational efficiency. After that, M-SRA is applied to crane steel structure optimization. The results show that the improved algorithm has higher global searching ability and computational efficiency than traditional population intelligence optimization algorithms. The research in this paper provides a reliable design method for the green lightweight design of crane steel structure and a reference for the green design of mechanical products.
The operators of overhead traveling cranes experience discomfort as a result of the vibrations of crane structures. These vibrations are produced by defects in the rails on which the cranes move. To improve the comfort of operators, a nine-degree-of-freedom (nine-DOF) mathematical model of a “human–crane–rail” system was constructed. Based on the theoretical guidance provided in ISO 2631-1, an annoyance rate model was established, and quantization results were determined. A dynamic optimization design method for overhead traveling cranes is proposed. A particle swarm optimization (PSO) algorithm was used to optimize the crane structural design, with the structure parameters as the basic variables, the annoyance rate model as the objective function, and the acceleration amplitude and displacement amplitude of the crane as the constraint conditions. The proposed model and method were used to optimize the design of a double-girder 100 t–28.5 m casting crane, and the optimal parameters are obtained. The results show that optimization decreases the human annoyance rate from 28.3% to 9.8% and the root mean square of the weighted acceleration of human vibration from 0.59 to 0.38 . These results demonstrate the effectiveness and practical applicability of the models and method proposed in this paper.
To determine the influence of temperature on the mechanical properties of crane metal structures, three Q355 alloy steel samples were processed and their elastic moduli were tested at different temperatures using a metal tension test bed. The constitutive equation for the elastic modulus of Q355 alloy steel at different temperatures was predicted using test data and a neural network algorithm. Based on crane structural characteristics and the principle of system dynamics, a coupling vibration model was established that included the crane flexible girder, cabin, trolley, crane, and temperature. System motion equations were established according to the Lagrange equation, and the approximate solution of nonlinear system vibration was solved by the direct integration method (the Newmark method). The dynamic characteristics of the main beam and cabin were analyzed at different temperatures, as well as safety during service. The results show that, with increasing temperature, the maximum midspan displacement of the main beam increases gradually, by 14.3%, 21.4%, and 57.1% at temperatures of 300°C, 400°C, and 600°C, respectively. The cabin vibration displacement increases with temperature, by up to 32.5% at 600°C, but the influence of temperature on cabin vibration acceleration is not obvious. It was concluded that the influence of temperature on the dynamic characteristics of the main beam must be considered during the design stage of cranes. The proposed model and analysis method provide a theoretical basis for the design of casting cranes according to temperature.
1 August 2023 in Recent Patents on Mechanical Engineering
Background: With a reduction in the weight of telescopic boom crane and an increase in its lifting capacity, the contradiction between its speed, stability and safety becomes more prominent. The telescopic arm also has flexible deformation during operation, which will cause vibration of the whole vehicle system. Therefore, in order to ensure safety, accuracy, and efficiency in the working process, it is necessary to accurately predict the dynamic characteristics of the telescopic boom load in the working process. Objective: The purpose of this study is to establish a rigid-flexible coupling dynamic model of the crane, which can accurately reflect the dynamic characteristics of the telescopic boom during its operation in the simulation test. Methods: In theory, this study analyzes the characteristics of a truck crane and simplifies it as a cantilever beam. Based on the Euler-Bernoulli beam theory, the vibration differential equation of the mobile masscantilever beam system is established. In the aspect of simulation, the three-dimensional modeling software Solidworks is used to establish the solid model of the truck telescopic boom, the finite element analysis software is used to establish the finite element model of the telescopic boom, and the modal neutral file is generated and imported into ADAMS to establish the dynamic model of the truck crane multi-level flexible telescopic boom. The dynamic simulation of the virtual prototype model of the truck telescopic boom crane is carried out in ADAMS software to obtain the dynamic characteristics of the key components of crane under specific working conditions. Results: The vibration differential equation derived in theory can be used to solve the dynamic response of the crane jib under specific conditions by MATLAB programming. In the aspect of simulation, the error fluctuation and its causes in the key components of the crane in the working state are analyzed, and the rationality of the virtual prototype model is verified. Finally, through the trajectory planning of the crane under typical working conditions, the purpose of stable control of the telescopic boom system of the truck crane is realized. Conclusion: The derived equation is universal for solving the vibration of crane jib in general cases. The rigid-flexible coupling model also provides a reference for the dynamic modeling, analysis, design, and manufacture of a multi-stage flexible telescopic boom. The findings of this study can provide a reference for related patent research and development.
8 June 2020 in Mathematical Problems in Engineering
A virtual enterprise is an effective organization formed by enterprises and partners under market opportunity which can flexibly adapt to the dynamic market demand and improve the competitiveness of enterprises. To select virtual enterprise partners objectively and scientifically, this study proposes the evaluation model of the innovation resource capability of the alternative enterprises under the unknown weight. In the multigranularity hesitation fuzzy language environment, the unknown weight is solved by using fuzzy entropy theory. The risk attitude of decision-making enterprises is introduced by using the improved prospect theory and the selection of partners is comprehensively considered. Finally, a case study is presented to demonstrate the effectiveness of the proposed approach. The research intends to enable the virtual enterprise to choose the partners swiftly such that they can compensate for the shortcomings and optimize the allocation of innovation resources.