This review addresses the growing need for the efficient recycling of crystalline silicon photovoltaic modules (PVMs), in the context of global solar energy adoption and the impending surge in end-of-life (EoL) panel waste. It examines current recycling methodologies and associated challenges, given PVMs’ finite lifespan and the anticipated rise in solar panel waste. The study explores various recycling methods—mechanical, thermal, and chemical—each with unique advantages and limitations. Mechanical recycling, while efficient, faces economic and environmental constraints. Thermal methods, particularly pyrolysis, effectively break down organic materials but are energy-intensive. Chemical processes are adept at recovering high-purity materials but struggle with ecological and cost considerations. The review also highlights multifaceted challenges in recycling, including hazardous by-product generation, environmental impact, and the economic feasibility of recycling infrastructures. The conclusion emphasizes the need for innovative, sustainable, and economically viable recycling technologies. Such advancements, alongside global standards and policy development, are crucial for the long-term sustainability of solar energy and effective management of PVM waste.

Because of increasing environmental awareness, it is becoming more important to remove harmful elements from water solutions. This study used activated carbon (AC) derived from waste wood-based panels as the base material, oxidized with nitric acid (OAC), and grafted with iminodiacetic acid (IDA-OAC) to improve the adsorption capacity and affinity for metals. The characterization of AC, OAC, and IDA-OAC was conducted via FTIR, SEM, N₂ adsorption and desorption analysis, elemental analysis, Boehm titration, and point of zero charge (PZC). The instrument studies proved the modified increasing of the functional groups of the adsorbents. Moreover, batch and column experiments were conducted to evaluate the ability of the three adsorbents to remove copper ions from aqueous solution. In batch sorption, IDA-OAC had the highest adsorption capacity (84.51 mg/g) compared to OAC (54.74 mg/g) and AC (24.86 mg/g) at pH 5. The breakthrough point (C_t/C_i = 0.05) of copper ions for IDA-OAC occurred much later than AC in the column experiment (AC = 19 BV, IDA-OAC = 52 BV). The Langmuir isotherm and pseudo-second-model kinetics modeling could better fit with the data obtained from the batch sorption of AC, OAC, and IDA-OAC. The significant capacity and reusability of IDA-OAC displayed high applicability for water treatment.

50 billion cubic meters of brine every year creates ecological hazards to the environment. In order to reuse brine efficiently, rubidium and cesium were recovered in this experiment. On the other hand, the main impurities which were needed to be eliminated in brine were lithium, sodium, potassium, calcium, and magnesium. In the procedure, seawater was distilled and evaporated first to turn into simulated brine. Perchloric acid was then added into simulated brine to precipitate potassium perchlorate which could reduce the influence of potassium in the extraction procedure. After that, t-BAMBP and ammonia were separately used as extractant and stripping agent in the extraction and stripping procedures to get rubidium hydroxide solutions and cesium hydroxide solutions. Subsequently, they reacted with ammonium carbonate to get rubidium carbonate and cesium carbonate. In a nutshell, this study shows the optimal parameters of pH value to precipitate potassium perchlorate. Besides, pH value in the system, the concentration of t-BAMBP and ammonia, organic phase/aqueous phase ratio (O/A ratio), reaction time, and reaction temperature in solvent extraction step were investigated to get high purities of rubidium carbonate and cesium carbonate.

With the dramatic increase of photovoltaic (PV) module installation in solar energy-based industries, the methods for recovering waste solar generators should be emphasized as the backup of the PV market for environmental protection. Crystalline-silicon accounts for most of the worldwide PV market and it contains valuable materials such as high purity of silicon (Si), silver (Ag), copper (Cu), tin (Sn), and lead (Pb). This study can provide an efficient recycling process for valuable materials resourced from waste crystalline-silicon PV module, including Si in the PV cell, and Ag, Cu, Pb, Sn, in PV ribbon. As tempered glass and Ethylene Vinyl Acetate (EVA) resin were removed, the module was separated into two materials, PV ribbon and PV cell. For PV cell purification, Si with purity at 99.84% was recovered by removing impurities such as aluminum (Al) and Ag by two-step leaching and dissolving the impurities. For PV ribbon recovering, purified metal or metal oxide was obtained through the processes of leaching/polishing, extraction, and chemical precipitation. In the polishing process, 99.5% of copper wire was collected. The purities of final products are 99.7% for CuO, 99.47% for PbO, 99.68% for SnO₂, and 98.85% for Ag respectively.

Desalination brine is a concentrated stream that is generated during the desalination process. Brine commonly has high salinity and TDS (total dissolved ions), which contains ions such as Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl⁻, SO₄²⁻, HCO₃⁻, PO₄³⁻, and some critical elements. Currently, the brine treatment mainly applies direct disposal, like surface water discharge, sewer discharge, deep‐well injection, and evaporation ponds. However, these methods can cause harm to marine ecosystems, soil, and groundwater. Therefore, brine can be regarded as a resource to be reutilized. This work then aims to highlight the novel developments of brine application. For example, Na, Ca, and Mg in brine can be employed for carbon capture and utilization with ammonia, amines, and alkaline substances. With slight adjustment, brine can also be directly used as irrigation water, aquaculture water, and the activation of biochar. Furthermore, brine holds a higher concentration of critical elements, which makes many countries and scholars start to conduct element extraction, reducing the amount of ore exploitation. At last, the major obstacles related to these advancements in sustainability, expenses, and technological aspects are outlined, and promising research trends of brine reutilization are also suggested.