Antibiotics are commonly used to prevent and control aquaculture diseases. However, long-term overuse of antibiotics not only leaves residues but also leads to changes in the nitrogen cycle in water, which threatens the survival of aquaculture organisms. The current results showed that sulfamethoxazole had no significant effect on the nitrogen cycle process in the actual aquaculture concentration. The inhibitory effect of 1.05 mg/L norfloxacin on ammonia-oxidizing bacteria was significantly greater than that on ammonia-oxidizing archaea, and the gene abundance of AOB amoA on the 14th day increased by 2.48 times compared with the 7th day. Under the influence of 3.9 mg/L oxytetracycline, the gene abundance of AOB amoA decreased significantly, while the number of AOA amoA genes increased, suggesting that there may be functional redundancy between AOA and AOB. At the genus level in the norfloxacin group, the relative abundance of Sva0485 increased by 14.0% on the 7th day compared with the control group but decreased 12.77% in the addition group. The relative abundance of Firmicutes, another dominant species in the oxytetracycline group, was 25.9%. This study shows that the addition of antibiotics may have a negative effect on the nitrogen-cycling microorganisms in aquaculture water.

Heavy metal pollution poses a significant threat to aquatic ecosystems and drinking water sources, necessitating comprehensive environmental assessments. This study investigated the spatial distribution, potential ecological risks, and sources of heavy metals in the surface sediments of Wanfeng Lake to inform effective pollution management strategies. Twelve sediment samples were collected and analyzed for eight heavy metals (Hg, As, Cu, Pb, Cd, Cr, Ni, Zn) using inductively coupled plasma mass spectrometry. The geo-accumulation index (I_geo) and potential ecological risk index (RI) were applied to assess contamination levels and ecological risks. Cluster analysis and Kriging interpolation were used to identify potential pollution sources and spatial patterns. Results revealed that heavy metal concentrations decreased in the order Zn > Pb > Cu > Cr > Ni > As > Cd > Hg, with Hg concentrations exceeding the national average for Chinese lake sediments. Ecological risk assessments identified Hg (0.06 μg/g) and Cd (0.10 μg/g) as the priority pollutants. The Hg posed a moderate ecological risk, particularly in upstream areas, while Cd pollution was concentrated downstream. Atmospheric deposition was identified as the primary source of Hg, whereas agricultural activities were determined to be the main driver of Cd contamination. These findings provide a scientific basis for developing targeted pollution control measures in Wanfeng Lake.

Nitrogen, phosphorus, and metals’ pollutants discharged from industrial sources eventually accumulate in lake sediment, hence increasing the difficulty of sediment treatment and disposal. In this work, the water storage ceramsite is prepared from dredged lake sediment and cyano-bacterial powder. The effects of pyrolysis temperature and cyanobacterial sediment on the porosity of ceramsite were investigated. The results showed that the pyrolysis of organic matter and the de-composition of compounds or salts can produce gas, causing a rich pore structure inside the ceramsite. When the temperature increased to 1150 °C, vitrification would collapse the pore structure inside the material. At the cyanobacterial-to-sediment ratio of 3:7, the porosity and water absorption of the material could reach 81.82% and 92.45% when the pyrolysis temperature was 500 and 1050 °C, respectively. The internal macropore structure of ceramsite improved the water absorption performance, and the mesoporous structure was responsible for its long water release time and stable water release structure. The ceramsite exhibited a superior metals’ retention effect. Under different pH and temperature conditions, the consolidation rates of Fe, Ni, Mn, Cr, and Pb in ceramsite were all more than 99%, suggesting the safety of the material in environmental applications. This study demonstrates the feasibility of the resourceful production of water storage ceramsite from lake sediment and cyanobacterial slurry, which helps to reduce the impact of solid waste on the environment. Thus, this work provides a practical basis for guiding water storage ceramsite in the construction of sponge cities.

Overpumping can cause arsenic to be released from the pore water in clayey aquitards into aquifers. The amount of water pumped during groundwater exploitation may change over time, leading to different soil-compaction rates or patterns. However, the impact of pressure on the release of arsenic during the compaction of a clayey aquitard is poorly understood. We performed a laboratory-compaction experiment using clayey sediment to identify the effects of compaction rates and patterns on arsenic release by analyzing the chemical characteristics and arsenic species present in pore water samples collected at different stages of the compaction experiment. A rapid (PV increased linearly) and a slow (PV increased exponentially) water-release patterns were recognized according to the compaction rate. We observed that arsenic concentrations in the slow pattern (6.7 to 36.4 μg/L) were considerably higher than those in the rapid pattern (7.6 to 16.1 μg/L). Furthermore, concentrations were the highest in the accelerated compaction pattern (16.8 to 47.4 μg/L), followed by those in the constant and decelerated patterns (4.3 to 14.4 μg/L). Overall, compaction rate and pattern did not alter the arsenic-release mechanism; however, they did alter the moisture content of the sediment at each stage, which indirectly led to differences in the released arsenic concentrations. These results suggest that pumping rates and patterns must be considered to prevent arsenic contamination in groundwater-extraction scenarios.

The ecological risks brought by sulfadiazine (SDZ) residues in the environment have put forward requirements for efficient antibiotic treatment technologies. In this study, biogenic manganese oxides (BMOs) were synthesized using the bacterium Stenotrophomonas maltophilia DT1, and a BMO/syringaldehyde (SYR) system was constructed for SDZ degradation to investigate its performance, mechanism, and potential application. Results showed that the DT1-synthesized BMO contained Mn (II/III/IV) and defect-related oxygen species, which enabled the BMO to participate in SYR activation and SDZ transformation. A total of 99.67% of 10 mg/L SDZ was removed within 3 h under optimized conditions. Humic acid and most environmental ions had no significant interference with the system, except for slight inhibition by Fe³⁺ and Mn²⁺. Three degradation pathways of SDZ were elucidated through the identification of five transformation products and density functional theory calculations. ECOSAR toxicity prediction and growth inhibition of Escherichia coli revealed that the degradation products exhibited significantly reduced toxicity. Furthermore, the BMO exhibited 4.41–17.47 times higher SYR-mediated SDZ transformation efficiency than chemically synthesized manganese oxide (CMO) and showed good performance in reuse tests and real water matrices. This study provides an efficient and eco-friendly green technology for the remediation of SDZ pollution in aquatic environments and provides potential support for the removal of refractory pollutants mediated by BMO.