Weronika Zaręba

Mrs. Weronika Zaręba


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 July 2026 in Sustainability
Verified
Journal Article
Open access
PDF file
WZWeronika Zaręba
Weronika Zaręba
PMPaweł Murzyn
Paweł Murzyn
Michał PyzalskiMichał Pyzalski
Michał Pyzalski
The study investigated and quantified the feasibility of using waste derived from shea tree fruit shells (Vitellaria paradoxa) as an organic multifunctional additive for building ceramic bodies, focusing on its influence on thermal behavior, pore formation, and mechanical performance. The scope of the research included sieve analysis, chemical analysis (WDXRF), phase composition analysis (XRD), thermal analysis coupled with evolved gas analysis (DTA–TG–EGA), and the evaluation of the physical and mechanical properties of the obtained ceramic materials. The analyses demonstrated that the shea waste was characterized by a high content of organic matter, a loss in ignition of 93.84%, and a calorific value of 19.421 kJ/g. The incorporation of biomass resulted in increased porosity and reduced apparent density of the ceramic materials. The relative porosity increased from 27.00% for the reference sample to 34.98% for the sample containing 30% shea waste. Simultaneously, the compressive strength decreased from 23.67 MPa to 10.10 MPa, while the flexural strength decreased from 8.96 MPa to 4.76 MPa. Partial replacement of conventional mineral additives and, in particular, partial substitution of fossil-derived kiln fuel demand with high-calorific biomass enabled a reduction in overall CO2 emissions associated with ceramic production. This includes both process-related emissions from raw material decomposition and fuel-related emissions generated in the tunnel kiln. In addition, a reduced contribution of carbon originating from inorganic mineral sources (including carbonates) to total emissions covered by emission trading systems (ETSs) was observed. Despite the reduction in mechanical parameters, samples containing up to 20% shea waste retained properties suitable for application in the production of ceramic building materials.

31 August 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
Roman DychkovskyiRoman Dychkovskyi
Roman Dychkovskyi
APArtem Pavlychenko
Artem Pavlychenko
Dariusz SALADariusz SALA
Dariusz SALA
Michał PyzalskiMichał Pyzalski
Michał Pyzalski
SDSerhii Dybrin
Serhii Dybrin
ECEdgar Caceres Cabana
Edgar Caceres Cabana
Thermal insulation materials play a crucial role in improving the energy efficiency and durability of buildings; however, their long-term performance can be significantly affected by moisture exposure. This study investigates the relationship between formulation parameters, water susceptibility, structural stability, environmental performance, and economic efficiency of lightweight thermal insulation composites. Ten experimental formulations were produced by systematically varying the cement content, water-to-cement ratio (W/C), gas-forming powder content, and polymer-modifying additives. Water resistance was evaluated through controlled immersion tests and measurements of mass variation and structural condition, supported by response-surface analysis. The experimentally determined water susceptibility ranged from 2.1% to 6.8%, demonstrating a systematic increase with increasing W/C ratio and gas-forming powder content. The most favorable result was obtained for composition no. 1, characterized by a W/C ratio of 0.55 and a powder content of 0.14 g, which exhibited the lowest water susceptibility of 2.1%. The developed composites achieved densities of up to 550 kg/m³ and thermal conductivity values below 0.12 W/(m·K), confirming their potential for building-envelope applications. Composition No. 1 also showed the lowest estimated material cost, approximately EUR 0.120/kg (EUR 66.04/m³), demonstrating that improved moisture resistance can be achieved without compromising economic efficiency. The results establish a quantitative composition–structure–property relationship and demonstrate that coordinated control of the W/C ratio, pore-forming component, and polymer modifiers is essential for balancing moisture resistance, thermal performance, material cost, and environmental sustainability. The proposed integrated assessment framework supports the development and selection of durable thermal insulation composites for sustainable construction, while further long-term durability, leaching, and life-cycle assessments are required to confirm their environmental performance under realistic service conditions.

12 November 2026 in Sustainability
Verified
Journal Article
Open access
PDF file
Roman DychkovskyiRoman Dychkovskyi
Roman Dychkovskyi
APArtem Pavlychenko
Artem Pavlychenko
Dariusz SALADariusz SALA
Dariusz SALA
Michał PyzalskiMichał Pyzalski
Michał Pyzalski
SDSerhii Dybrin
Serhii Dybrin
ECEdgar Caceres Cabana
Edgar Caceres Cabana
Thermal insulation materials play a crucial role in improving the energy efficiency and durability of buildings; however, their long-term performance can be significantly affected by moisture exposure. This study investigates the relationship between the formulation parameters, water susceptibility, structural stability, environmental performance, and economic efficiency of lightweight thermal insulation composites. Ten experimental formulations were produced by systematically varying the cement content, water-to-cement ratio (W/C), gas-forming powder content, and polymer-modifying additives. Water resistance was evaluated through controlled immersion tests and measurements of mass variation and structural condition, supported by response-surface analysis. The experimentally determined water susceptibility ranged from 2.1% to 6.8%, demonstrating a systematic increase with increasing W/C ratio and gas-forming powder content. The most favorable result was obtained for composition no. 1, characterized by a W/C ratio of 0.55 and a powder content of 0.14 g, which exhibited the lowest water susceptibility of 2.1%. In our previous studies, the developed waste-based thermal insulation materials demonstrated a density of up to 550 kg/m3 and thermal conductivity below 0.12 W/(m·K). Building on these results, the present study focuses on their water absorption and water-resistance characteristics. Composition No. 1 also showed the lowest estimated material cost, approximately EUR 0.120/kg (EUR 66.04/m3), demonstrating that improved moisture resistance can be achieved without compromising economic efficiency. The results establish a quantitative composition–structure–property relationship and demonstrate that coordinated control of the W/C ratio, pore-forming component, and polymer modifiers is essential for balancing moisture resistance, thermal performance, material cost, and environmental sustainability. The proposed integrated assessment framework supports the development and selection of durable thermal insulation composites for sustainable construction, while further long-term durability, leaching, and life-cycle assessments are required to confirm their environmental performance under realistic service conditions.