In this work, fast-recovery characteristics of high-power GaN Schottky barrier diode (SBD) limiters are investigated through a parallel-resonator-assisted topology and a circuit-level transient simulation method for recovery-process analysis. By introducing a parallel resonant unit, composed of the diode junction capacitance and short-circuited stubs, into a conventional shunt limiter topology, the high-frequency passband characteristics of the traditional shunt topology under large-size GaN SBD conditions are improved, and the transient response after high-power excitation is reshaped, thereby shortening the recovery time from the large-signal limiting state to the small-signal steady-state operation. Based on the ADS platform, a combined excitation scheme using a high-power pulse signal and a low-power continuous-wave signal is adopted to perform circuit-level transient simulation of the limiter recovery process. Simulation results show that, under a 50-W input power condition, the recovery time is reduced from 16.3 ns to 11.2 ns after introducing the parallel resonant unit in the C-band. These results indicate that circuit topology significantly affects the recovery behavior of high-power GaN SBD limiters, and the proposed approach provides a useful reference for circuit-level design and transient analysis of fast-recovery microwave limiters.
In recent years, the rapid evolution of large artificial intelligence (AI) models has placed unprecedented demands on the computing power of data center servers, driving an explosive growth in data center computing requirements. The power consumption of core computing components, represented by GPUs, has surged dramatically. When facing extremely high power densities, the traditional 12 V single-voltage power delivery architecture exposes severe limitations, including increased transmission link losses, thermal management difficulties, and low system efficiency. To address these challenges, this paper proposes and designs a hierarchical 54 V/12 V dual-plane multi-phase DC power delivery architecture for high-computing-power AI servers. By conducting refined hierarchical identification of system loads, this architecture introduces a 54 V high-voltage DC power plane for high-power loads while retaining the 12 V power plane for conventional loads. Within each power plane, multi-phase interleaved parallel Buck converters integrated with Turbo-COT control strategies and high-density DrMOS are deployed. Experimental results demonstrate that this power architecture exhibits excellent electrical characteristics: under steady-state conditions, the peak-to-peak (PK-PK) ripple voltage fluctuation amplitude of the 54 V power plane under different loads is compressed to between ±0.22% and ±0.26%, while the PK-PK ripple voltage fluctuation amplitude of the 12V power plane under different loads reaches ±0.66% to ±0.68%; in dynamic load step (0–50% and 50–100%) tests, the PK-PK voltage fluctuations of the 54 V plane are ±1.42% and ±1.33%, whereas the PK-PK voltage fluctuations of the 12 V power plane are ±2.36% and ±1.83%. Furthermore, the peak conversion efficiency of the 54 V power plane approaches 97%, and the maximum efficiency of the 12 V power plane reaches 94%, showing a measurable efficiency improvement under the tested conditions. The hierarchical multi-phase power delivery technology comprehensively reduces power supply link losses and enhances power stability, providing an important theoretical basis and engineering reference for the design of next-generation high-density AI servers and the optimization of green, energy-saving networks in data centers.