Xiangguan Tan

Dr. Xiangguan Tan

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 November 2023 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
XTXiangguan Tan
Xiangguan Tan
YZYuxia Zhang
Yuxia Zhang
This letter presents a novel compact rat-race coupler that allows for simultaneous tuning of its operating frequency and power-dividing ratio. By substituting the tunable transmission-line section of the varactor-based rat-race coupler with two novel types of tunable units, it enables a wide tuning range for both frequency and power division ratio. To demonstrate the effectiveness of the design, a compact rat-race coupler was designed, processed, and measured. In the frequency-tunable mode, the measured 3-dB operating frequency can be adjusted from 1.2 to 3.1 GHz, while maintaining return loss and isolation of ${>}15$ and ${>}35$ dB, respectively. Under the power-dividing ratio-tunable mode, the measured power-dividing ratio of the coupler can be adjusted within ranges from $-$ 5 to 17 dB, $-$ 11.4 to 8 dB, and $-$ 12.1 to 4 dB at 1.2, 2.2, and 3.0 GHz, respectively. Compared to the existing couplers of the same type, the proposed coupler has the widest frequency tuning range.

18 January 2024 in Electronics
Verified
Journal Article
Open access
PDF file
QXQingxin Xiang
Qingxin Xiang
XTXiangguan Tan
Xiangguan Tan
QDQingan Ding
Qingan Ding
YZYuping Zhang
Yuping Zhang
This research paper introduces an innovative design for a compact bandpass filter, notable for achieving a substantial tuning range of operational frequencies using just a single bias voltage. The design is based on a planar microstrip approach, distinguished by its straightforward and efficient structure. Additionally, this filter is characterized by its excellent performance in suppressing out-of-band frequencies. To validate the practicality and effectiveness of this novel design, a compact filter was designed, manufactured, and measured. The testing results were impressive, showing that the filter’s measured center frequency could be tuned across a wide spectrum, from 1.1 to 3.1 GHz, achieving a relative bandwidth of up to 95%. Herein, the relative bandwidth is derived from the calculation of 2(fhigh − flow)/(fhigh + flow). Remarkably, the filter consistently maintains a return loss exceeding 19 dB throughout its tuning range. Additionally, it sustains a 15 dB return loss bandwidth greater than 90 MHz, with the insertion loss varying between a minimum of 0.9 dB and a maximum of 2.1 dB. The compactness of the filter is one of its standout features, with circuit dimensions measuring a mere 0.06λg × 0.09λg (physical dimensions is 13.8 mm × 21.3 mm), where λg represents the wavelength at the filter’s lowest center frequency.

17 February 2025 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
RZRikang Zhao
Rikang Zhao
DLDichen Lu
Dichen Lu
XKXuanwu Kang
Xuanwu Kang
WWWeike Wang
Weike Wang
LWLihua Wang
Lihua Wang
XLXinyu Liu
Xinyu Liu
In this article, we report enhancing RF performance by improving the thermal management of gallium nitride (GaN) Schottky barrier diodes (SBDs), demonstrated through the application of a limiter. Benefiting from the rapid heat dissipation of microjet cooling, the impact of heat accumulation on the performance of GaN SBDs is analyzed, demonstrating the dependence of GaN lateral heterojunction devices on high thermal conductivity substrate. A GaN-SBD using high thermal conductivity SiC substrate was developed, reducing ON-resistance by 8% and improving saturation current by 12%. By combining microjet cooling with optimized substrates, the thermal management capability of GaN SBDs was significantly enhanced. RF performance was effectively evaluated using a passive limiter monolithic microwave integrated circuit (MMIC), showing the isolation was significantly improved by 3.5 dB at 80 W, and the reflected power was increased by 14%. The results highlight the improvements in RF performance achieved through enhanced thermal management of GaN SBDs and present a preliminary exploration of microjet cooling in high-power limiters.

17 December 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
XTXiangguan Tan
Xiangguan Tan
ZMZhuojie Ma
Zhuojie Ma
YZYuxia Zhang
Yuxia Zhang
RZRikang Zhao
Rikang Zhao
For the first time, this article presents a compact multifunctional reconfigurable coupler that combines the functionalities of both a quadrature coupler and a rat-race coupler. By utilizing a novel tunable unit to replace traditional $\lambda $ /4 or 3 $\lambda $ /4 transmission lines, this design not only integrates two coupler functions but also allows for tuning the frequency or power-dividing ratio for each function. A compact tunable coupler is designed, fabricated, and measured to validate the design. The measurement results indicate that in the quadrature coupler mode, first, the coupling-paths i.e., forward coupling (FWCP) and backward coupling (BWCP) can be switched. Subsequently, 3-dB frequency tuning from 1.36 to 2.9 GHz can be achieved on both paths while maintaining return loss and isolation $>$ 15 dB and $>$ 18 dB, respectively. Finally, the power-dividing ratios are tuned from $-$ 16 to 4 dB, $-$ 15.8 to 7 dB, and $-$ 16 to 3.6 dB at 1.6, 2.0, and 2.6 GHz, respectively. This tuning is also achievable on both paths, with return loss and isolation $>$ 14.3 dB and $>$ 15.5 dB, respectively, throughout the tuning process. In the rat-race coupler mode, 3-dB frequency tuning from 1.3 to 1.85 GHz can be achieved, with return loss and isolation exceeding 27 and 35 dB, respectively, across all states.

28 June 2026 in Micromachines
Verified
Journal Article
Open access
PDF file
RZRikang Zhao
Rikang Zhao
YZYu Zhang
Yu Zhang
XTXiansong Tian
Xiansong Tian
XTXiangguan Tan
Xiangguan Tan
SXShaohang Xu
Shaohang Xu
JLJuin J. Liou
Juin J. Liou
In this work, fast-recovery characteristics of high-power GaN Schottky barrier diode (SBD) limiters are investigated through a parallel-resonator-assisted topology and a circuit-level transient simulation method for recovery-process analysis. By introducing a parallel resonant unit, composed of the diode junction capacitance and short-circuited stubs, into a conventional shunt limiter topology, the high-frequency passband characteristics of the traditional shunt topology under large-size GaN SBD conditions are improved, and the transient response after high-power excitation is reshaped, thereby shortening the recovery time from the large-signal limiting state to the small-signal steady-state operation. Based on the ADS platform, a combined excitation scheme using a high-power pulse signal and a low-power continuous-wave signal is adopted to perform circuit-level transient simulation of the limiter recovery process. Simulation results show that, under a 50-W input power condition, the recovery time is reduced from 16.3 ns to 11.2 ns after introducing the parallel resonant unit in the C-band. These results indicate that circuit topology significantly affects the recovery behavior of high-power GaN SBD limiters, and the proposed approach provides a useful reference for circuit-level design and transient analysis of fast-recovery microwave limiters.

26 November 2025 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
YZYuxia Zhang
Yuxia Zhang
XTXiangguan Tan
Xiangguan Tan
This work proposes, for the first time, a planar multifunctional reconfigurable balanced quadrature coupler capable of both coupling-path switching and power-dividing ratio tuning. To realize these functions, a novel tunable unit replaces the conventional $\lambda $ /4 transmission line, enabling coupling-path reconfiguration and mode-dependent power-dividing ratio control. Closed-form design equations are developed to guide the synthesis. A 2.0-GHz prototype is designed, fabricated, and measured for validation. Measurement results verify that the proposed coupler supports reconfigurable operation between forward coupling (FWCP) and backward coupling (BWCP) paths. In the FWCP mode, the power-dividing ratio can be tuned from –5.8 to 6.0dB, with the differential-mode (DM) return loss and isolation exceeding 17 and 16.7 dB, respectively. In the BWCP mode, a tuning range of –6.4 to 5.6 dB is achieved, while maintaining DM return loss and isolation greater than 16 and 16.6 dB, respectively, throughout the tuning process. The simulated and measured results show good agreement. Moreover, across all configurations, the coupler exhibits stable DM characteristics, high common-mode (CM) suppression, and low cross-mode conversion.