Radio frequency wireless energy transfer (WET) is a promising solution for powering autonomous Internet of Things (IoT) deployments. In this work, we leverage energy beamforming for powering multiple user equipments (UEs) with stringent energy harvesting (EH) demands in an indoor distributed massive multiple-input multiple-output system. Based on semi-definite programming, successive convex approximation (SCA), and maximum ratio transmission (MRT) techniques, we derive optimal and sub-optimal precoders aimed at minimizing the radio stripes’ transmit power while exploiting information of the power transfer efficiency of the EH circuits at the UEs. Moreover, we propose an analytical framework to assess and control the electromagnetic field (EMF) radiation exposure in the considered indoor scenario. Numerical results show that i) the EMF radiation exposure can be more easily controlled at higher frequencies at the cost of a higher transmit power consumption, ii) training is not a very critical factor for the considered indoor system, iii) MRT/SCA-based precoders are particularly appealing when serving a small number of UEs, thus, especially suitable for implementation in a time domain multiple access (TDMA) scheduling framework, and iv) TDMA is more efficient than spatial domain multiple access (SDMA) when serving a relatively small number of UEs. Results suggest that additional boosting performance strategies are needed to increase the overall system efficiency, thus making the technology viable in practice.
11 February 2021 in IEEE Transactions on Wireless Communications
The fundamental challenge of the millimeter-wave (mmWave) frequency band is the sensitivity of the radio channel to blockages, which gives rise to unstable connectivity and impacts the reliability of a system. To this end, multi-point connectivity is a promising approach for ensuring the desired rate and reliability requirements. A robust beamformer design is proposed to improve the communication reliability by exploiting the spatial macro-diversity and a pessimistic estimate of rates over potential link blockage combinations. Specifically, we provide a blockage-aware algorithm for the weighted sum-rate maximization (WSRM) problem with parallel beamformer processing across distributed remote radio units (RRUs). Combinations of non-convex and coupled constraints are handled via successive convex approximation (SCA) framework, which admits a closed-form solution for each SCA step, by solving a system of Karush-Kuhn-Tucker (KKT) optimality conditions. Unlike the conventional coordinated multi-point (CoMP) schemes, the proposed blockage-aware beamformer design has, per-iteration, computational complexity in the order of RRU antennas instead of system-wide joint transmit antennas. This leads to a practical and computationally efficient implementation that is scalable to any arbitrary multi-point configuration. In the presence of random blockages, the proposed schemes are shown to significantly outperform baseline scenarios and result in reliable mmWave communication.
12 January 2023 in IEEE Transactions on Communications
The provision of accurate localization is an increasingly important feature of wireless networks. To this end, a reliable distinction between line-of-sight (LOS) and non-LOS (NLOS) radio links is necessary to avoid degenerative localization estimation biases. Interestingly, LOS and NLOS transmissions affect the polarization of the received signals differently. In this work, we leverage this phenomenon to propose a threshold-based LOS/NLOS classifier exploiting weighted differential carrier phase measurements over a single link with different polarization configurations. Operation in either full or limited polarization diversity systems is possible. We develop a framework for assessing the performance of the proposed classifier, and show through simulations the performance impact of the reflecting materials in NLOS scenarios. For instance, the classifier is far more efficient in NLOS scenarios with wooden reflectors than in those with metallic reflectors. Numerical results evince the potential performance gains from exploiting full polarization diversity, properly weighting the differential carrier phase measurements, and using multi-carrier/tone transmissions. Finally, we show that the optimum decision threshold is inversely proportional to the path power gain in dB, while it does not depend significantly on the material of potential NLOS reflectors.
One of the key elements of future 5G and beyond mobile technology is millimeter-wave (mmWave) communications, which is targeted to extreme high-data rate services. Furthermore, combining the possibility of a wideband signal transmission with the capability of pencil-beamforming, mmWave technology is key for accurate cellular-based positioning. However, it is also well-known that at the mmWave frequency band the radio channel is very sensitive to line-of-sight blockages giving rise to unstable connectivity and inefficient communication. In this paper, we tackle the blockage problem and propose a solution to increase the communication reliability by means of a coordinated multi-point reception. We also investigate the advantage of this solution in terms of positioning quality. More specifically, we describe a robust hybrid analog–digital receive beamforming strategy to combat the unavailability of dominant links. Numerical examples are provided to validate the efficiency of our proposed method.
19 October 2022 in IEEE Transactions on Wireless Communications
Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. The battery depletion phenomenon is avoided by preemptively incorporating information regarding the receivers’ battery state and EH fluctuations into the resource allocation design. The resulting time-average sum-power minimization problem is temporally correlated, non-convex (including mutually coupled latency-battery queue dynamics), and in general intractable. We use the Lyapunov optimization framework and derive a dynamic control algorithm to transform the original problem into a sequence of per-time-slot deterministic and independent subproblems. The latter are then solved via two alternative approaches: i) semidefinite relaxation combined with fractional programming, and ii) successive convex approximation. Furthermore, we design a low-complexity closed-form iterative algorithm exploiting the Karush-Kuhn-Tucker optimality conditions for a specific scenario with delay bounded batteryless receivers. Numerical results provide insights on the robustness of the proposed designs to realize an energy-efficient SWIPT system while ensuring latency and EH requirements in a time dynamic network.
The sensitivity of the millimeter-wave (mmWave) radio channel to blockages is a fundamental challenge in achieving low-latency and highly-reliable connectivity. In this paper, we explore the viability of using Coordinated Multi-Point (CoMP) transmission for delay bounded and reliable mmWave systems. We propose a blockage-aware framework for the sum-power minimization problem under the user-specific latency requirements in time dynamic mobile access networks. We use the Lyapunov optimization approach and provide a dynamic control algorithm, which transforms a time-average stochastic problem into a sequence of deterministic subproblems. A robust beamformer design is then proposed by exploiting the queue backlogs and channel information, that efficiently allocates the required resources, by proactively tuning the CoMP subsets from the available remote radio units (RRUs), according to the instantaneous needs of the users. Further, to adapt to the uncertainties of the mmWave channel, we consider a pessimistic estimate of the rates over link blockage combinations across the CoMP serving set. Moreover, after the relaxation of coupled and non-convex constraints via the Fractional Program (FP) techniques, a low-complexity closed-form iterative algorithm is provided by solving a system of Karush-Kuhn-Tucker (KKT) optimality conditions. The simulation results manifest that, in the presence of random link blockages, the proposed methods outperform the baseline scenarios and provide power-efficient, highly-reliable, and low-latency mmWave communication.