Objectives: The evidence for diagnostic accuracy using cone beam computed tomography (CBCT) for dental applications depends heavily on ex vivo research, but there is little knowledge of whether the model used affects the diagnostic accuracy results. The objective of this study was to determine the impact of different designs of anthropomorphic models on diagnostic accuracy for the specific task of dental root fracture detection. Methods: Horizontal or oblique root fracture was induced in 24 of 48 permanent maxillary incisors. The 48 teeth were scanned by CBCT using standard clinical exposure factors on five occasions, each with a different model design. Scans were viewed by five dental and maxillofacial radiologists, who each made a forced diagnosis of fracture or no fracture in each root and a judgment on root fracture using a five-point confidence scale. Sensitivity (Se), specificity (Sp) and areas under receiver operating characteristic (ROC) curve (Az) were calculated for each observer for each model. Results: There were no significant differences between the diagnostic accuracy measurements recorded using different models. There were, however, numerous significant differences between observers using the same anthropomorphic model. Conclusions: Despite the differences in X-ray attenuation between the five model designs, the results suggest that the anthropomorphic model does not affect the results of diagnostic accuracy studies on root fracture using this CBCT machine at standard clinical exposures. This provides some confidence in the previously published evidence. The interobserver diagnosis differences indicate that research using only two observers could provide misleading results.
1 January 2024 in International Journal of Dentistry
Objectives. This study aimed to evaluate and compare palatal thickness in adults for the placement of mini‐implants for miniscrew‐assisted rapid palatal expansion (MARPE) appliances using cone‐beam computed tomography (CBCT) in a sample of Iraqi‐Kurdish people. Materials and Methods. CBCT scans from 68 Kurdish patients, aged between 18 and 30 years, were assessed retrospectively. Of these, 37 were males and 31 were females. The measurements were performed at 3 mm from the mid‐palatal suture. T‐zone was selected for the anterior points, at the level of the palatal cusps of 2nd premolars, and the posterior point at the level of mesio‐palatal cusps of 1st molars bilaterally. Palatal thickness of males and females bilaterally, as well as anterior and posterior areas, were measured and compared. An independent t‐test was applied for comparison for normally distributed data, and the Mann–Whitney test was utilized for nonnormally distributed data. Additionally, Bonferroni correction was implemented for p‐value adjustment. Results. The mean palatal thickness at the anterior area was 6.06 mm for males, 6.17 mm for females on the right side, 5.94 mm for males, and 5.99 mm for females on the left side. The mean palatal thickness at the posterior area was almost the same for both genders (4.40 mm for males and 4.44 mm for females) on the right side, 4.35 mm for males, and 4.54 mm for females on the left side. Statistically, no significant difference was recorded between males and females, as well as right and left sides in both anterior and posterior regions; however, a very highly statistically significant difference (p < 0.001) was recorded when comparing total thickness, including both hard and soft tissue, between anterior and posterior regions. Conclusions. CBCT proves a highly effective modality in assessing palatal thickness and suggesting ideal locations for orthodontic mini‐screw placement. Our examination of palatal thickness in a sample of Iraqi‐Kurdish individuals revealed no statistical difference between genders or sides, but significant variations were noted between anterior and posterior thicknesses. Comprehensive clinical and pre‐expansion CBCT evaluations are crucial for precisely determining the optimal placement of MARPE devices in each patient, ensuring successful outcomes.
Objectives: The aim of this study was to determine a “low-dose protocol” which provides acceptable diagnostic accuracy for detection of root fractures in unrestored anterior maxillary teeth, using an ex vivo model. Methods: 48 maxillary anterior teeth, half with horizontal or oblique root fractures, were imaged using CBCT in an anthropomorphic model. Nine X-ray exposure combinations were used, including the manufacturer’s standard (“reference”) exposure and high-resolution settings (“HiRes”), by varying kV, exposure time, and rotation angle. Measurements of Dose Area Product (DAP) were recorded. Five dental radiologists assessed the scans for root fractures and judged image quality. Parameters of diagnostic accuracy were calculated, including area under the Receiver Operating Characteristic curve (Az). Objective measures of image quality were made at the same exposure combinations using an image quality phantom. Results: Although there was a significant linear relationship between DAP and mean Az, only the lowest DAP exposure combination had a mean Az significantly different to the reference exposure. There was no significant effect on other diagnostic accuracy parameters when using HiRes compared with the reference exposure. There was a significant positive relationship between DAP and contrast resolution. HiRes did not significantly improve contrast resolution and made a small improvement to spatial resolution. Conclusions: Scope existed for radiation dose reduction compared with the manufacturer’s guidance. There was no improvement in diagnostic accuracy using HiRes settings. A cautious recommendation for this CBCT machine is that it is possible to achieve a dose reduction of about 20% compared with the reference exposure parameters.
Background and objective: Maxillary sinus pathology is a common finding on routine CBCT scans of the maxilla. Hence the objective of this study is to define the frequency of accidental findings within maxillary sinuses on patients’ CBCT images that are referred for various dento-alveolar reasons in the maxilla and to evaluate the relation of the age and gender with the maxillary sinus condition. Methods: A total of 255 sequential CBCT scans from patients aged between 15-78 years, with a localized field of view (8.0cm x 5.0 cm) were retrospectively included in the analysis, resulting in an evaluation of 510 maxillary sinuses. The findings were categorized as healthy sinus, mucosal thickening, polypoid thickening and partial opacification. Result: Out of 255 patients, 148 (58%) were males and 107 (42%) were females with a mean age of 50.23 (SD=19.08). Implant assessment was the major request 206 (80.8%) followed by exploration of impacted teeth 35 (13.7%). 52.2% of included cases showed sinuses with no pathology (NP). 47.8% showed accidental findings of wich mucosal thickening (MT) was the highest 104 (40.8%). The relationship between gender and maxillary sinus status was statistically non-significant (p=0.346). The relation of the age (≤50 and >50) and sinus status, however, was statistically significant (p=0.035) Conclusion: According to the present study results, the most common referral reasons for CBCT examination were for implant assessment. Mucosal thickening was the highest among the pathologic findings in the maxillary sinus. There was no significant relationship between gender and maxillary sinus status but there was a statistically significant rela[1]tionship between age and findings. CBCT can help in the early detection and evaluation of accidental pathologies within maxillary antra in asymptomatic patients. The findings of the present study recommend a thorough interpretation of the whole volume CBCT scans, by an oral radiologist, to ensure a proper diagnosis as it might have an impact on the patient’s medical status and advice the referred practitioner about the findings which may affect the treatment plan accord[1]ingly. Finally, referral of the patient to a spe[1]cialist if necessary.
Background/Objectives: Severe posterior mandibular atrophy is often limiting for implant placement due to diminished bone height and proximity to the mental fora-men with its anatomical variations, particularly the anterior loop. Conventional solutions may require invasive procedures or result in prosthetic cantilevers. Utilization of available lingual bone to bypass the mental foramen may represent a less invasive alternative; however, anatomical evidence supporting this concept remains limited. The aim of this retrospective study was to evaluate the availability of lingual bone adjacent to the mental foramen in atrophied mandibles using cone-beam computed tomography (CBCT), thereby determining the feasibility of a mental foramen bypass approach for implant placement. Methods: 110 CBCT scans of adult patients with atrophied mandibles were analyzed. Linear measurements were obtained from the lingual cortical plate to the mesial (Point A), middle (Point B), and distal (Point C) borders of the mental foramen. The presence of the anterior loop was recorded. Descriptive statistics and independent-samples t-tests were performed to compare measurements between loop and no-loop groups (α = 0.05). Results: The mean measurements of the lingual bone were 7.22 ± 1.65 mm at Point A, 6.18 ± 1.55 mm at Point B, and 4.82 ± 1.38 mm at Point C, showing a gradual decrease from mesial to distal. An anterior loop was found in 26.4% of the cases. Significantly thinner dimensions of the lingual bone were observed with an anterior loop at all three measurement points (P < .01). Implant placement lingual to the mental foramen in the clinical case was possible without neurosensory complications. Conclusions: These observations provide a good back-ground from an anatomical point of view to mental foramen bypass concept as a less invasive alternative to the nerve repositioning procedures, creating the possibility for more distally positioned implant placement, reducing prosthetic cantilever length, and enhancing prosthetically favorable implant-supported rehabilitation in atrophied mandibles.
Background/Objectives: Severe posterior mandibular atrophy presents anatomical challenges for implant rehabilitation because of reduced residual bone volume and the close relationship between the mental foramen, its anatomical variations, and the surrounding alveolar bone. Among these variations, the anterior loop may further influence the available lingual bone adjacent to the mental foramen. Despite the clinical importance of this region, quantitative three-dimensional anatomical information regarding lingual bone availability remains limited. Therefore, the aim of this retrospective cone-beam computed tomography (CBCT)-based study was to quantitatively evaluate the availability of lingual bone adjacent to the mental foramen in posterior atrophied mandibles and to assess the influence of the anterior loop on these anatomical dimensions, thereby providing quantitative anatomical information about this region. Methods: In a retrospective CBCT-based anatomical study, 110 CBCT scans of adult patients with atrophied mandibles were analyzed using standardized cross-sectional views perpendicular to the dental arch; linear measurements were obtained from the lingual cortical plate to the mesial (Point A), middle (Point B), and distal (Point C) borders of the mental foramen. The presence of the anterior loop was recorded. Descriptive statistics and independent-samples t-tests were performed to compare measurements between loop and no-loop groups (α = 0.05). Results: The mean measurements of the lingual bone were 7.22 ± 1.65 mm at Point A, 6.18 ± 1.55 mm at Point B, and 4.82 ± 1.38 mm at Point C, showing a gradual decrease from mesial to distal. An anterior loop was found in 26.4% of the cases. Significantly thinner dimensions of the lingual bone were observed with an anterior loop at all three measurement points (p < 0.01). Conclusions: The present CBCT-based anatomical study measured the amount of lingual bone available adjacent to the mental foramen in posterior atrophied mandibles and observed a significant correlation between the presence of an anterior loop and reduced lingual bone dimensions. These findings add to the knowledge of the anatomy of this area and could serve as the basis for future clinical studies to investigate the potential for a mental foramen bypass concept.