Ultrafine KAl(OH)2CO3 dry powder (UDWP), as a novel high-temperature-resistant ultrafine dry powder fire extinguishing agent, has garnered significant attention in the field of aviation fire protection. However, its development has been hindered by its hydrophilicity, which leads to hygroscopicity, and its tendency for re-ignition due to oil deposition. Therefore, this study employs perfluorodecyltrimethoxysilane (PFDTMS) to modify the surface of UDWP, resulting in hydrophobic and oleophobic M-UDWP. The thermal stability and hydrophobicity of M-UDWP ensure its long-term stable storage in aircraft equipment compartments, thereby reducing aircraft maintenance costs. Additionally, its oleophobicity provides excellent anti-re-ignition performance, protecting aircraft power compartments from secondary fire damage. Energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) analyses indicate that the PFDTMS modifier was successfully grafted onto KAl(OH)2CO3. Furthermore, M-UDWP exhibits a three-stage thermal decomposition process. The first-stage decomposition can be regarded as a single-step reaction, and the calculated kinetic parameters provide accurate predictions. Thermogravimetric analysis-Fourier transform infrared spectroscopy-mass spectrometry (TG-FTIR-MS) results reveal that M-UDWP significantly produces H2O and CO2 during thermal decomposition, which is one of its core fire extinguishing mechanisms. For the combustion of #RP-3 and #RP-5 aviation kerosene, commonly found in aircraft engine nacelles, the extinguishing times required by M-UDWP are 243 ms and 224 ms, respectively, with minimum extinguishing concentrations (MEC) of 25.9 g/m3 and 23.4 g/m3, respectively. The study of M-UDWP’s thermal stability aids in understanding its storage stability under high-temperature conditions and its fire extinguishing mechanisms in fire zones. Moreover, the research findings suggest that M-UDWP has the potential to replace Halon 1301 in aircraft engine nacelles.
Ultra-fine dry powder extinguishing agent (UDPEA) is a promising alternative to Halon agents in aviation firefighting. The formulation of UDPEAs should balance environmental friendliness and practical engineering requirements, including high extinguishing efficiency, excellent flowability, and prolonged anti-reignition. This study investigates the effects of three modification methods (single perfluorooctyl triethoxysilane (FOTS), single N-(3-Triethoxysilylpropyl)perfluoro(2,5-dimethyl-3,6-dioxanonanoyl)amide (PFPE), and a combination of FOTS and PFPE at various mass ratios (2.0:0.4, 1.6:0.8, 1.2:1.2, 0.8:1.6, 0.4:2.0) (g)) on the performance of sodium bicarbonate-based UDPEA. The results indicate that using FOTS or PFPE alone improves the water and oil contact angles, but still fails to meet the required hydrophobicity and oleophobicity standards, and it also reduces the flowability and fire-extinguishing capability. A combination of FOTS and PFPE at the 1:2 ratio yields the best performance, with the water and oil contact angles of 145.169° and 143.542°, respectively, the lowest flowability index (0.224), minimal extinguishing concentration and time (14.183 g/m3 and 1.976 s, respectively), which is only 52.7% and 68.3% of those of the unmodified UDPEA’s (26.927 g/m3 and 2.893 s), and the longest anti-reignition time (68.5 s). In addition, the fire-extinguishing mechanisms (chemical inhibition and physical heat absorption) and anti-reignition mechanisms of the modified UDPEA (with the FOTS to PFPE ratio of 1:2) were revealed. This research aims to design an eco-friendly, high-performance UDPEA as an effective substitute for Halon extinguishing agents. These findings can provide valuable insights for evaluating and selecting aviation fire-extinguishing agents.