We report p-type tin monoselenide (SnSe) single crystals, grown in double-sealed quartz ampoules using a modified Bridgman technique at 920 °C. X-ray powder diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) measurements clearly confirm that the grown SnSe consists of single-crystal SnSe. Electrical transport of multi-layer SnSe nanoflakes, which were prepared by exfoliation from bulk single crystals, was conducted using back-gated field-effect transistor (FET) structures with Au and Ti contacts on SiO2/Si substrates, revealing that multi-layer SnSe nanoflakes exhibit p-type semiconductor characteristics owing to the Sn vacancies on the surfaces of SnSe nanoflakes. In addition, a strong carrier screening effect was observed in 70−90-nm-thick SnSe nanoflake FETs. Furthermore, the effect of the metal contacts to multi-layer SnSe nanoflake-based FETs is also discussed with two different metals, such as Ti/Au and Au contacts.
6 July 2024 in International Journal of Hydrogen Energy
As a wide energy band gap semiconductor, a Ga2O3 thin film was prepared by the sol–gel process with different annealing processes. Since Ga2O3 is a type of metal oxide structure, an oxygen annealing process can be considered to remove oxygen defects. An effective oxygen annealing process can help form a β-Ga2O3 structure with reduced defects. In this study, different types of annealing effects for β-Ga2O3 were investigated and compared. An electric furnace process using thermal effect characteristics of and an Rapid Thermal Annealing (RTA) process applied with an infrared radiation light source were compared. Two and 4 h thermal annealing processes were conducted at 900 °C in the furnace. Meanwhile, to study the optical annealing effects, 2 h furnace at 900 °C + 15 min in rapid thermal annealing and only 15 min in rapid thermal annealing effects were compared, respectively. Through increasing the thermal annealing temperature and time, β-Ga2O3 can be formed even though a sol–gel process was employed in this experiment. An annealing temperature of at least 900 °C was required to form β-Ga2O3 thin film. Moreover, by introducing an RTA process just after the spinning process of thin film, a β-Ga2O3 thin film was formed on the sapphire substrates. Compared with the electric furnace process applied for 2 h, the RTA process performed in 15 min has a relatively short process time and results in similar structural and optical characteristics of a thin film. From the X-ray diffraction patterns and UV spectrometer analysis, optically annealed β-Ga2O3 thin films on the sapphire substrate showed a highly crystalized structure with a wide energy band gap of 4.8 eV.
1 August 2006 in Japanese Journal of Applied Physics
In this study, lead-free 0.852Bi0.5Na0.5TiO3−0.12Bi0.5K0.5TiO3−0.028BaTiO3 (BNKBT 85.2/12/2.8) ceramics were synthesized using the conventional mixed oxide method, with Nd3+ doping at concentrations of 0.00, 0.25, 0.50, 0.75, 1.00, and 2.00 mol%. The research focused on the phase transition from ferroelectric to relaxor and the associated electromechanical properties. X-ray diffraction (XRD) analysis confirmed the successful incorporation of Nd3+ into the lattice, forming a perovskite phase and indicating the coexistence of multiple phases in the morphotropic phase boundary (MPB) region. The transition from ferroelectric to relaxor was observed in the polarization–electric field (P–E) and strain–electric field (S–E) loops. Pure samples exhibited ferroelectric behavior, with a relatively square P–E loop and a butterfly-shaped S–E loop. At 0.5 mol% Nd3+, a pinched P–E loop and a significant negative strain in the S–E loop were observed. At 2.0 mol% Nd3+, the ceramics demonstrated relaxor characteristics, with a thin P–E loop and minimal negative strain in the S–E loop. The optimal piezoelectric coefficient (d33), remnant polarization (Pr), and dielectric constant (εr) were found at 0.5 mol% Nd3+, reaching 243 pC N−1, 36.61 μC cm−2, and 1814.54, respectively. The highest value of 761 pm V−1 was observed at 2.0 mol% Nd3+, indicating dominant relaxor behavior. This study highlights the significant influence of Nd3+ doping on the phase transition and electromechanical properties of BNKBT ceramics, underscoring their potential as lead-free alternatives for sensor and actuator applications.