Erizal . MAgr

Dr. Erizal . MAgr

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 August 2020 in Infrastructures
Verified
Journal Article
Open access
PDF file
Heriansyah PutraHeriansyah Putra
Heriansyah Putra
HYHideaki Yasuhara
Hideaki Yasuhara
EMErizal . MAgr
Erizal . MAgr
SUSutoyo
Sutoyo
MFMuhammad Fauzan
Muhammad Fauzan
Calcite-induced precipitation methods (CIPMs) have recently become potential techniques in geotechnical engineering for improving the shear strength of sandy soil. One of the most promising methods among them is enzyme-induced calcite precipitation (EICP). In this technique, a mixed solution composed of reagents and the urease enzyme, which produces calcite, is utilized as the grouting material. The precipitated calcite in granular soil provides ties among the grains of soil and limits their mobility, thus promoting an improvement in strength and stiffness and also a reduction in the hydraulic conductivity of sandy soil. This paper discusses the potential increase in the strength and stiffness of the soil, the additional materials for grouting, the effect of these materials on the treatment process, and the engineering properties of the soil. The possible sources of the urease enzyme and the applicability of the EICP method to other soil types are also discussed in this paper. The environmental and economic impacts of the application of EICP are also presented. The envisioned plans for application, potential advantages, and limitations of EICP for soil stabilization are discussed. Finally, the primary challenges and opportunities for development in future research are briefly addressed.

30 August 2021 in Crystals
Verified
Journal Article
Open access
PDF file
Heriansyah PutraHeriansyah Putra
Heriansyah Putra
EMErizal . MAgr
Erizal . MAgr
SUSutoyo
Sutoyo
MSMinson Simatupang
Minson Simatupang
Dede Heri Yuli YantoDede Heri Yuli Yanto
Dede Heri Yuli Yanto
Organic soil has a high content of water and compressibility. Besides that, it has a low specific gravity, density, and shear strength. This study evaluates the applicability of the soybean crude urease for calcite precipitation (SCU-CP) method and its effectiveness in organic soil as a soil-amelioration technique. Various soybean concentrations were mixed with a reagent composed of urea and calcium chloride to produce the treatment solution. Its effect on the hydrolysis rate, pH, and amount of precipitated calcite was evaluated through test-tube experiments. SEM-EDS tests were performed to observe the mineralogy and morphology of the untreated and treated samples. The treatment solution composed of the reagent and various concentrations of soybeans was applied to organic soil. The increasing strength of the organic soil was evaluated using direct shear (DS) and unconfined compression (UCS) tests. The test-tube results show that a hydrolysis rate of 1600 u/g was obtained when using 50 g/L of soybeans with a precipitation ratio of 100%. The mechanical tests show a significant enhancement in the parameters of the organic soil’s shear strength. A shear strength improvement of 50% was achieved in this study. A UCS of 148 kPa and cohesion of 50 kPa was obtained in the treated samples of organic soil. This research elucidates that the SCU-CP is an effective technique for improving organic soil’s shear strength.

15 February 2022 in Biodiversitas Journal of Biological Diversity
Verified
Journal Article
Open access
PDF file
YFYulia Amirul Fata
Yulia Amirul Fata
HHHendrayanto Hendrayanto
Hendrayanto Hendrayanto
EEErizal Erizal
Erizal Erizal
STSuria Tarigan
Suria Tarigan
CWCahyo Wibowo
Cahyo Wibowo
Fata YA, Hendrayanto, Erizal, Tarigan SD, Wibowo C. 2022. Vetiver root cohesion at different growth sites in Bogor, Indonesia. Biodiversitas 23: 1683-1692.The plant root system, including the root system of vetiver grass, plays a critical role in enhancing soil cohesion, shear strength, and vegetated slope stability. Numerous studies on mechanical reinforcement of vetiver grass-roots have been conducted, with the majority of studies focusing on ground-planted vetiver with good maintainedor naturally grown vetiver, while mechanical reinforcement of vetiver grass roots planted in landslide areas at various growth sites with less maintenance is still uncommon.The purpose of this study was to examine the vetiver grass-roots cohesion that grew in the different growth sites that had been affected by landslides. Vetiver grass root samples were collected in January 2021, at the age of 8 months. Vetiver grass roots were collected from vetiver plants growing in the affected landslide areas of (a) bareland, (b) shrubland, and (c) bushland. The root tensile strength of root samples was determined using a Universal Testing Machine (UTM) with a capacity of 3 tons, and the measurement accuracy of the load cell was 1/10000. The test was conducted in accordance with ASTM D638-14 guidelines. Three repetitions were performed on roots representing the root length class of 10 cm. The results indicated that the growth sites influenced the morphological and architectural properties of the vetiver grass-roots. The vetiver grass that grew in bushland exhibited a higher root density than bareland or shrubland. The roots were denser and had a greater range of lengths. Short roots less than 10 cm in length were the most prevalent, and the majority of them were found near the soil surface. The greater the soil depth, the less the quantity of roots.The tensile strength (TR) tends to get smaller with longer roots, and vetiver grass rootsgrew in bareland have the highestTR(15-59 MPa) relative to their growth in bushland (9-37 MPa) and shrubland (16-29 MPa). The ratio of root fiber area to root growth area (RAR) also tends to get smaller with deeper roots. Likewise, is the tensile strength increasing caused by roots (tR) and root cohesion (CR) which are a function of RAR. The CR??of vetiver roots growing in bushland (0.015-0.275 kPa) were relatively higher than those growing in bareland (0.02-0.168 kPa) and shrubland (0.002-0.028 kPa) in the same root length class, at the same depth.

14 September 2022 in Forests
Verified
Journal Article
Open access
PDF file
Effendi Tri BahtiarEffendi Tri Bahtiar
Effendi Tri Bahtiar
EMErizal . MAgr
Erizal . MAgr
DHDede Hermawan
Dede Hermawan
Naresworo NugrohoNaresworo Nugroho
Naresworo Nugroho
RHRizky Hidayatullah
Rizky Hidayatullah
The beam stability factor (CL) is applied in construction practices to adjust the reference bending design value (Fb) of sawn lumber to consider the lateral-torsional buckling. Bending tests were carried out on 272 specimens of four wood species, namely, red meranti (Shorea sp.), mahogany (Swietenia sp.), pine (Pinus sp.), and agathis (Agathis sp.), to analyze a simply supported beam subjected to concentrated loads at several points. The empirical CL value is a ratio of the modulus of rupture (SR) of a specimen to the average SR of the standard-size specimens. The non-linear regression estimated the Euler buckling coefficient for sawn lumber beam (KbE) in this study as 0.413, with 5% lower and 5% upper values of 0.338 and 0.488. Applying the 2.74 factor, which represents an approximately 5% lower exclusion value on the pure bending modulus of elasticity (Emin) and a factor of safety, the adjusted Euler buckling coefficient (KbE′) value for a timber beam was 1.13 (0.92–1.34), which is within the range approved by the NDS (KbE′ = 1.20). This study harmonizes the NDS design practices of CL computation with the empirical results. Because agathis has the lowest ductility (μ), most natural defects (smallest strength ratio, S), and highest E/SR ratio, the agathis beam did not twist during the bending test; instead, it failed before twisting could occur, indicating inelastic material failure. Meanwhile the other specimens (pinus, mahogany, and red meranti), which have smaller E/SR ratio, higher ductility, and less natural defects, tended to fail because of lesser beam stability. This phenomenon resulted in the CL curve of agathis being the highest among the others. The CL value is mathematically related to the beam slenderness ratio (RB) and the E/SR ratio. Because the strength ratio (S) and ductility ratio (μ) have significant inverse correlations with the E/SR ratio, they are correlated with the CL value. Applying the CL value to adjust the characteristic bending strength is safe and reliable, as less than 5% of the specimens’ SR data points lie below the curve of the adjusted characteristics values.

1 July 2023 in Journal of Degraded and Mining Lands Management
Verified
Journal Article
Open access
PDF file
YFYulia Amirul Fata
Yulia Amirul Fata
HHHendrayanto Hendrayanto
Hendrayanto Hendrayanto
EEErizal Erizal
Erizal Erizal
STSuria Tarigan
Suria Tarigan
TKTakeshi Katsumi
Takeshi Katsumi
Root system mechanical reinforcement through root-soil cohesion on slope stability is important. However, the root cohesion of Tectona grandis, Maesopsis eminii, and shrubs (Chromolaena odorata) on slope stability is rarely studied and modelled. This study aimed to model the mechanical effect of vegetation through root cohesion, namely teak (Tectona grandis), Maesopsis eminii, and shrubs (Chromolaena odorata). The study was conducted in a simultaneous landslide on January 1, 2020, that dominantly occurred on vegetated slopes of Sukajaya District, Bogor Regency, West Java. The Wu model's root cohesion (CR) was modelled on slope stability using a modified Bishop model. The modelling used the data from field and laboratory-measured. The study found that the presence of a root system increases slope stability's factor of safety (FOS). The root system of young Maesopsiss eminii produces the largest effect of FOS compared to the root system of shrubs, teak, and old Maesopsis eminii. The slope stability of vegetated slopes is a function of the CR and the effective root zone depth. The highest total CR of vegetation was teak with 0.398 kPa, followed by shrubs, young Maesopsis eminii, and old Maesopsis eminii with 0.202 kPa, 0.191 kPa, and 0.087 kPa, respectively. The effective root zone of teak, young Maesopsis eminii, and shrub were 500, 230, 140, and 66 cm, respectively.

1 October 2022 in Journal of Degraded and Mining Lands Management
Verified
Journal Article
Open access
PDF file
YFYulia Amirul Fata
Yulia Amirul Fata
HHHendrayanto Hendrayanto
Hendrayanto Hendrayanto
BKBudi Kuncahyo
Budi Kuncahyo
EEErizal Erizal
Erizal Erizal
STSuria Tarigan
Suria Tarigan
Bogor, Cianjur, and Sukabumi areas of West Java Province, Indonesia, are vulnerable landslide areas. This study analyzes the landslide characteristic and the factors affecting landslides. The analysis was carried out on 148 landslides from 415 of 2018-2020 landslides, which were selected purposively by considering the heterogeneity of soil, geology, slope classes, land use type, and accessibility of landslide locations. Landslide characteristics and factors affecting landslides were analyzed using frequency analysis and binary logistic regression. The results showed that the most dominant characteristics of surface and shallow landslides were the landslides characterized by slopes >45%, Quaternary geological period, Andisol soil type, agriculture land use type, the occurrence of rain, and absence of earthquake. The dominant factors affecting surface and shallow landslides are human activities in land use, soil properties, steep-very steep slopes, Inceptisol and Entisol soil orders, young rocks (Quaternary geological period), rainfall events, and high earthquake magnitude.