This article is devoted to the development of a new method for the synthesis of magnetic cobalt boride nanoparticles using a low-energy approach. The obtained nanoparticles were used to create composite materials based on industrial thermoplastic ABS. The effect of different concentrations of nanoparticles on the physical, mechanical, magnetic, and dielectric properties of composite materials was studied. It was proven that by varying the concentration of nanoparticles in the ABS composite, it is possible to control the glass transition temperature from 107.5 to 112 °C. The resulting composites demonstrated superparamagnetic behavior, which changed linearly. The permittivity of the composite remained close to that of pure ABS, but a shift in the maximum permittivity to the low-frequency region was observed with an increase in the content of nanoparticles. Thus, a method for controlling the mechanical, magnetic, and dielectric properties of a composite material has been developed, which makes it possible to use routine ABS in a wider range of applications, including electrical devices.
The purpose of the work is to conduct a comparative analysis of the stability of two types of polymer coatings to the effects of formation water and hydrochloric acid based on the analysis of mechanical properties, thermal stability and surface morphology. To accomplish the task, modern physical-chemical methods were used: differential scanning calorimetry, microscopy, an electromechanical universal testing machine, a dilatometer. Simulation of the effect of water at elevated temperatures and pressures on the polymer coating samples was carried out in an autoclave-reactor, the study of the effect of acid was carried out in a glass beaker. On the basis of the work carried out, results were obtained that show similarities and differences in the behavior of the polymer samples studied. The change of the dynamic modulus of elasticity and the coefficient of linear thermal expansion with increasing temperature is investigated. In general, it has been shown that PE-RT polymer has better characteristics than PE polymer. However, both of them are stable to the exposure of formation water and hydrochloric acid and can protect corrosion of high pressure pipes connections.