To push the specific impulse and power output of the thrust-controlled solid rocket motor (TCSRM) even higher, the solid-propellant flame temperature is driven to 3000–3600 K. That level of thermal assault subjects the pintle to extreme heat flux and aggressive erosion, a combination that directly undercuts motor reliability. An effective cooling strategy for the pintle is therefore mandatory. Here, a film-cooling scheme is deployed for thermal protection of the pintle, and a comprehensive study on the transient aero-thermal characteristics of pintle film cooling is carried out to demonstrate how it outperforms the uncooled baseline in extending pintle survival and to reveal the effects of the blowing ratio and pintle moving speed on the performance. The results indicate that the film cooling contributes to improving the pintle cooling performance. As pintle velocity increases, the absolute velocity component of the coolant jet parallel to the mainstream velocity decreases. This causes the relative angle between the coolant jet and mainstream to increase, leading to a stronger interaction between the coolant jet and mainstream. Accordingly, except under low-blowing-ratio conditions, the time-averaged film-cooling effectiveness declines as the pintle velocity increases. Moreover, there is an optimum blowing ratio to achieve the highest time-averaged film-cooling effectiveness.
A multiphysics theoretical framework is presented for CO2 phase-change ejection power units, integrating the GERG-2008 equation of state for multiphase CO2 thermophysical properties with the Jones–Wilkins–Lee (JWL) combustion model through customized Abaqus VUEOS and VHETVAL subroutines. The Coupled Eulerian–Lagrangian (CEL) method resolves the strongly coupled interaction between high-pressure compressible CO2 and solid structures across supercritical, liquid–vapor coexistence, and gaseous phases. Validation against experimental pressure–time measurements demonstrates a maximum relative error below 10% throughout the pressurization trajectory, with peak pressure prediction accuracy of 4.1%. This validated framework offers quantitative design guidance for next-generation cold launch systems, enabling systematic optimization of high-pressure chamber configurations, release pressures, and operational parameters for enhanced energy efficiency and reliable performance in variable deployment environments.
This investigation introduces a conceptual configuration for an innovative combined cooling and power (CCP) arrangement that harnesses waste thermal energy from a supercritical carbon dioxide (sCO2) power loop through integration with a cascading transcritical CO2 cycle coupled with a lithium bromide–water vapor absorption chiller (tCO2/LiBr-H2O VAR). A systematic comparative assessment of thermodynamic behavior and exergoeconomic characteristics was executed across three configurations: the newly proposed CCP scheme, a hybrid sCO2/tCO2 power system, and a conventional standalone sCO2 engine. Parametric sensitivity analyses were conducted to evaluate how various operating parameters influence overall system effectiveness, while particle swarm optimization (PSO) was employed to determine the optimal exergetic efficiency peaks and minimum unit product costs for each architecture. Findings demonstrate that the proposed CCP topology delivers exergy efficiency enhancements of 8.46% and 1.65% relative to the standalone sCO2 configuration and the combined sCO2/tCO2 arrangement, respectively. Correspondingly, reductions in total product unit costs reach 2.80% and 0.80% for the same comparisons. These outcomes confirm that employing a cascading tCO2/LiBr-H2O VAR subsystem as the bottoming cycle represents a compelling solution for cooling and power production.