The overall goal of this project was to demonstrate a novel process-intensified and modular Combined Hydrogen, Heat and Power (CH2P) production technology, targeting commercial scales of 5-to-10-megawatt electric (MWe) equivalent of hydrogen (H2). The process technology integrates a novel adaptation of the steam-iron process to produce high purity H2 from gasification of biomass and biomass blends with a compression-ready carbon dioxide (CO2) stream, enabling significant progress towards achieving $1 per kilogram (kg) cost for clean H2.
The overall objective of this work is to perform a pre-Front End Engineering Design (pre-FEED) study of the conversion of associated gas produced at an active oil pad of a Bakken oil field producer, to high value carbon black and hydrogen using the Microwave Plasma Pyrolysis of Associated Gas (MPP-AG) process developed by H Quest Vanguard, Inc (HQV). The University of North Dakota’s Center for Process Engineering Research (CPER) collaborated with HQV to complete a design and techno-economic analysis for the MPP-AG deployed at an active Bakken well site flaring an average of 54,000 standard cubic feet per day of AG. The proposed design consists of: • A Microwave Pyrolysis Unit (MPU) which consists of H Quest’s proprietary MPP technology • A patent-pending Gas Conditioning Unit (GCU) designed by the University of North Dakota to condition intermittent and variable flow gas prior to pyrolysis. • An auxiliary unit running on the associated gas to power the GCU and MPU in an “island mode” configuration.
This study presents a comprehensive evaluation of sorbent injection to mitigate sodium emissions in a 250 MWe cyclone-fired boiler using lignite coal. Using historical boiler operational data, a computational fluid dynamics (CFD) model was validated and simulations were subsequently conducted to identify optimum sorbent injection locations for maximizing dispersion within the boiler cross-section and limiting sorbent temperatures to avoid deactivation. Data from the literature were used to guide sorbent injection rates and target sorbent particle sizes. Subsequent field demonstrations with the injection of a commercially available sorbent achieved a 60–80% reduction in the gas phase sodium, which was visually corroborated by reduced deposition on heat exchanger probes placed inside the boiler as well as by data on ash composition as a function of size. Furthermore, a diffusion-kinetic model, incorporating alkali vapor (NaOH) capture and subsequent sorbent deactivation, was developed and integrated into the CFD simulations as a post-processing tool and tested against the field demonstration data. Additional bench-scale testing was conducted with a range of sorbents as part of tool development for selecting from locally available sorbent sources. These bench-scale tests indicated a definite shift in the aerosol particle size distribution (PSD) toward a coarser range and depletion in the ultra-fine sizes, confirming the capture of vapor phase sodium species by the sorbents. Notably, in these tests, the sorbents remained effective even when they became molten, suggesting the potential for more convenient and cost-effective injection strategies.