Naveed Mazhar

Dr. Naveed Mazhar

National University of Sciences and Technology
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2022 in Alexandria Engineering Journal
Verified
Journal Article
Open access
Naveed MazharNaveed Mazhar
Naveed Mazhar
FMFahad Mumtaz Malik
Fahad Mumtaz Malik
ARAbid Raza
Abid Raza
RKRameez Khan
Rameez Khan

30 November 2020 in IEEE Access
Verified
Journal Article
Open access
ARAbid Raza
Abid Raza
FMFahad Mumtaz Malik
Fahad Mumtaz Malik
Naveed MazharNaveed Mazhar
Naveed Mazhar
HUHameed Ullah
Hameed Ullah
RKRameez Khan
Rameez Khan
In this article, a finite-time robust tracking control of output constrained multirotor unmanned aerial vehicle (UAV) is proposed. A finite-time sliding mode control (SMC) technique with barrier Lyapunov function (BLF) is used to assure robustness of the derived control laws while maintaining the output in specified constraints. A comparison of the proposed controller is carried out with conventional SMC to manifest the effectiveness of the output-constrained tracking control. Numerical simulations of quadrotor UAV with exogenous disturbances and time-invariant output constraints demonstrate the efficacy of the proposed controller regarding robustness, finite-time convergence, and chattering reduction.

8 May 2021 in Sensors
Verified
Journal Article
Open access
PDF file
HUHameed Ullah
Hameed Ullah
FMFahad Mumtaz Malik
Fahad Mumtaz Malik
ARAbid Raza
Abid Raza
Naveed MazharNaveed Mazhar
Naveed Mazhar
RKRameez Khan
Rameez Khan
LAlive:irfankhandgk11 Ahmad
live:irfankhandgk11 Ahmad
This article focuses on the output feedback control of single-link flexible-joint robot manipulators (SFJRMs) with matched disturbances and parametric uncertainties. Formally, four sensing elements are required to design the controller for single-link manipulators. We have designed a robust control technique for the semiglobal stabilization problem of the angular position of the link in the SFJRM system, with the availability of only a position sensing device. The sliding mode control (SMC) based output feedback controller is devised for SFJRM dynamics. The nonlinear model of SFJRM is considered to estimate the unknown states utilizing the high-gain observer (HGO). It is shown that the output under SMC using HGO-based estimated states coincides with that using original states when the gains of HGO are sufficiently high. Finally, the results are presented showing that the designed control technique works well when the SFJRM model is uncertain and matched perturbations are expected.

5 November 2018 in Micromachines
Verified
Journal Article
Open access
PDF file
MSMuhammad Saqib
Muhammad Saqib
MSMuhammad Mubasher Saleem
Muhammad Mubasher Saleem
Naveed MazharNaveed Mazhar
Naveed Mazhar
SASaifullah Awan
Saifullah Awan
Umar KhanUmar Khan
Umar Khan
This paper presents the design and analysis of a multi degree of freedom (DOF) electro-thermally actuated non-resonant MEMS gyroscope with a 3-DOF drive mode and 1-DOF sense mode system. The 3-DOF drive mode system consists of three masses coupled together using suspension beams. The 1-DOF system consists of a single mass whose motion is decoupled from the drive mode using a decoupling frame. The gyroscope is designed to be operated in the flat region between the first two resonant peaks in drive mode, thus minimizing the effect of environmental and fabrication process variations on device performance. The high gain in the flat operational region is achieved by tuning the suspension beams stiffness. A detailed analytical model, considering the dynamics of both the electro-thermal actuator and multi-mass system, is developed. A parametric optimization is carried out, considering the microfabrication process constraints of the Metal Multi-User MEMS Processes (MetalMUMPs), to achieve high gain. The stiffness of suspension beams is optimized such that the sense mode resonant frequency lies in the flat region between the first two resonant peaks in the drive mode. The results acquired through the developed analytical model are verified with the help of 3D finite element method (FEM)-based simulations. The first three resonant frequencies in the drive mode are designed to be 2.51 kHz, 3.68 kHz, and 5.77 kHz, respectively. The sense mode resonant frequency is designed to be 3.13 kHz. At an actuation voltage of 0.2 V, the dynamically amplified drive mode gain in the sense mass is obtained to be 18.6 µm. With this gain, a capacitive change of 28.11   f F and 862.13   f F is achieved corresponding to the sense mode amplitude of 0.15   μ m and 4.5   μ m at atmospheric air pressure and in a vacuum, respectively.

24 March 2021 in IEEE Access
Verified
Journal Article
Open access
RKRameez Khan
Rameez Khan
FMFahad Mumtaz Malik
Fahad Mumtaz Malik
Naveed MazharNaveed Mazhar
Naveed Mazhar
ARAbid Raza
Abid Raza
RARaja Amer Azim
Raja Amer Azim
HUHameed Ullah
Hameed Ullah
This article presents the robust lateral control of an autonomous vehicle in the presence of unknown lateral tire forces, road curvature angle, and parametric uncertainties. The sliding mode control (SMC) with barrier Lyapunov function is implemented to guarantee the system robustness while maintaining the outputs of the system in realistic bounds. Following the model reduction approach, the slow and fast dynamics of the system are separately controlled using the proposed control technique. The efficacy of the proposed control technique is examined by comparing the simulation results with conventional sliding mode control in two-time scales.

1 April 2020
Verified
Conference Paper
Closed access
Naveed MazharNaveed Mazhar
Naveed Mazhar
FMFahad Mumtaz Malik
Fahad Mumtaz Malik
RKRameez Khan
Rameez Khan
ARAbid Raza
Abid Raza
SMSaeed Mazhar
Saeed Mazhar
MIMuhammad Irfan
Muhammad Irfan
The robust decentralized formation control for the multiagent quadrotor is investigated in this article. The leaderless formation protocol is proposed for a class of square multi-input multi-output nonlinear multiagent systems with an undirected communication graph. The six degree of freedom underactuated nonlinear model of multiagent quadrotor is considered and altered to a four-input four-output model by stabilizing two states internally using sliding mode control (SMC). Later, the sliding mode-based finite-time position, altitude and heading formation is established based on Lyapunov stability theory. The numerical simulations are performed using MATLAB/ Simulink which validate the proposed formation protocol.