In this article, a finite-time robust tracking control of output constrained multirotor unmanned aerial vehicle (UAV) is proposed. A finite-time sliding mode control (SMC) technique with barrier Lyapunov function (BLF) is used to assure robustness of the derived control laws while maintaining the output in specified constraints. A comparison of the proposed controller is carried out with conventional SMC to manifest the effectiveness of the output-constrained tracking control. Numerical simulations of quadrotor UAV with exogenous disturbances and time-invariant output constraints demonstrate the efficacy of the proposed controller regarding robustness, finite-time convergence, and chattering reduction.
This article focuses on the output feedback control of single-link flexible-joint robot manipulators (SFJRMs) with matched disturbances and parametric uncertainties. Formally, four sensing elements are required to design the controller for single-link manipulators. We have designed a robust control technique for the semiglobal stabilization problem of the angular position of the link in the SFJRM system, with the availability of only a position sensing device. The sliding mode control (SMC) based output feedback controller is devised for SFJRM dynamics. The nonlinear model of SFJRM is considered to estimate the unknown states utilizing the high-gain observer (HGO). It is shown that the output under SMC using HGO-based estimated states coincides with that using original states when the gains of HGO are sufficiently high. Finally, the results are presented showing that the designed control technique works well when the SFJRM model is uncertain and matched perturbations are expected.
This article presents the robust lateral control of an autonomous vehicle in the presence of unknown lateral tire forces, road curvature angle, and parametric uncertainties. The sliding mode control (SMC) with barrier Lyapunov function is implemented to guarantee the system robustness while maintaining the outputs of the system in realistic bounds. Following the model reduction approach, the slow and fast dynamics of the system are separately controlled using the proposed control technique. The efficacy of the proposed control technique is examined by comparing the simulation results with conventional sliding mode control in two-time scales.
In this paper, an Improved Integral Power Rate Exponential Reaching Law (IIPRERL) Sliding Mode Control strategy has been presented to cater to the chattering problem and stability issue with the focusing on to achieve minimum steady-state errors in the presence of matched disturbances for a quadrotor. Control strategies have been implemented on quadrotor which is 6 Degree of Freedom (DOF) underactuated model and it is derived via Newton-Euler(NE) equations. The main focus of this article is to design two flight control strategies for a quadrotor. Firstly, a novel IIPRERL-SMC is designed through Improved Integral Sliding Mode Control (II-SMC) via proper gain scheduling by system Eigenvalues. The control objective is to construct a controller such that would force the state trajectories to approach the sliding surface with an exponential policy. Meanwhile, a strong condition for reaching the law of sliding surface via Hurwitz stability has been introduced to the hovering of the quadrotor. Secondly, kinodynamic Rapidly Exploring Random Tree with Fixed Node (RRT*FN) which is an incremental sampling-based optimal algorithm has been implemented for online navigation and flight control of the quadrotor system. Online planning which is based on the offline one, is given on-board radar readings which gradually produces a smooth 3-D trajectory aiming at reaching a predetermined target in an unknown environment. The performance and stability of the quadrotor are completely examined by utilizing Lyapunov stability analysis. Simulations are presented to verify that the proposed scheme is effective with Hurwitz stability for both translational and rotational parts of the quadrotor.
Robust output tracking of uncertain systems requires nonlinear controllers due to approximate parameters and exogenous disturbances. However, the design of nonlinear control is often more complex for practical implementation. This article presents a simple nonlinear robust control for the ball and beam system based on integral sliding mode control. In addition to this a low pass filter is designed to estimate the disturbance and alleviate the chattering effect. A comparison of the proposed technique with the conventional sliding mode control is carried out using MATLAB/ SIMULINK. The simulation results validate the efficacy and improved performance of the proposed technique in the presence of exogenous disturbances and parametric uncertainties.
As the interest about electric vehicles has increased due to factors such as the raising fuel price and pollution, the number of torque control strategies are being researched to improve the drivability of EVs. Modern vehicles need a high degree of refinement to meet customer demand. Drivability of vehicle can be improved through recent research in automotive electronic control. Rapid boost of torque by an electric motor creates undesired torsional oscillations, leading to problems which regard to comfort drivability, wheel slip and increased fatigue of driveline components. In this research paper, we have designed torque management strategies using PID for traction and cruise control applications, to damp out driveline oscillations, and to improve drivability of EVs considering backlash as disturbance. A model-based design approach has been adopted in this research since it can be used effectively for designing, developing and prototyping of controllers. Accordingly, the scope of this research falls under 3 categories: modeling, control design and control evaluation.