Langner Langner

Mr. Langner Langner

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 March 2021 in Scientific Reports
Verified
Journal Article
Open access
PDF file
LLLangner Langner
Langner Langner
TSTim Sieber
Tim Sieber
JAJörg Acker
Jörg Acker
End-of-life lithium-ion batteries represent an important secondary raw material source for nickel, cobalt, manganese and lithium compounds in order to obtain starting materials for the production of new cathode material. Each process step in recycling must be performed in such a way contamination products on the cathode material are avoided or reduced. This paper is dedicated to the first step of each recycling process, the deep discharge of lithium-ion batteries, as a prerequisite for the safe opening and disassembling. If pouch cells with different states of charge are connected in series and deep-discharged together, copper deposition occurs preferably in the cell with the lower charge capacity. The current forced through the cell with a low charge capacity leads, after lithium depletion in the anode and the collapse of the solid-electrolyte-interphase (SEI) to a polarity reversal in which the copper collector of the anode is dissolved and copper is deposited on the cathode surface. Based on measurements of the temperature, voltage drop and copper concentration in the electrolyte at the cell with the originally lower charge capacity, the point of dissolution and incipient deposition of copper could be identified and a model of the processes during deep discharge could be developed.

12 February 2019 in Nanomaterials
Verified
Journal Article
Open access
PDF file
TSTim Sieber
Tim Sieber
JDJana Ducke
Jana Ducke
ARAnja Rietig
Anja Rietig
LLLangner Langner
Langner Langner
JAJörg Acker
Jörg Acker
Nickel–manganese–cobalt oxides, with LiNi0.33Mn0.33Co0.33O2 (NMC) as the most prominent compound, are state-of-the-art cathode materials for lithium-ion batteries in electric vehicles. The growing market for electro mobility has led to a growing global demand for Li, Co, Ni, and Mn, making spent lithium-ion batteries a valuable secondary resource. Going forward, energy- and resource-inefficient pyrometallurgical and hydrometallurgical recycling strategies must be avoided. We presented an approach to recover NMC particles from spent lithium-ion battery cathodes while preserving their chemical and morphological properties, with a minimal use of chemicals. The key task was the separation of the cathode coating layer consisting of NMC, an organic binder, and carbon black, from the Al substrate foil. This can be performed in water under strong agitation to support the slow detachment process. However, the contact of the NMC cathode with water leads to a release of Li+ ions and a fast increase in the pH. Unwanted side reactions may occur as the Al substrate foil starts to dissolve and Al(OH)3 precipitates on the NMC. These side reactions are avoided using pH-adjusted solutions with sufficiently high buffer capacities to separate the coating layer from the Al substrate, without precipitations and without degradation of the NMC particles.

6 April 2023 in Scientific Reports
Verified
Journal Article
Open access
PDF file
LLLangner Langner
Langner Langner
TSTim Sieber
Tim Sieber
ARAnja Rietig
Anja Rietig
VMVirginia Merk
Virginia Merk
LPLutz Pfeifer
Lutz Pfeifer
JAJörg Acker
Jörg Acker
The present study deals with the phenomenological observation of the corrosion of the positive electrode foil of lithium-ion batteries containing LiNi0.6Co0.2Mn0.2O2 (NMC) as cathode material. Due to the presence of moisture, localized water accumulation is formed on the NMC surface. The water absorbed by the electrolyte reacts with the NMC under Li+/H+ exchange and the resulting pH increase leads to dissolution of the carrier foil and characteristic salt-like blooms on the NMC surface. With the increase in the relative area occupied by the holes in the aluminum foil per time, a sufficiently suitable parameter was found with which to quantitatively determine the extent of corrosion. The degree of degradation depends on time and ambient humidity. It was shown that functional recycling with the water jet method is no longer applicable for degraded foils, since the mechanical stability of the foils decreases as corrosion progresses. Lithium, aluminum, sulfur and oxygen were detected in the blooms using SEM–EDX and Laser-Induced-Breakdown-Spectroscopy (LIBS). The underlying NMC layer was found to contain mainly aluminum and significantly lower lithium content than the non-degraded material. SEM and Raman microscopy analyses also showed that the active material is also locally degraded and therefore no longer suitable for functional recycling.

17 September 2019 in Physical Chemistry Chemical Physics
Verified
Journal Article
Closed access
PDF file
ARAnja Rietig
Anja Rietig
LLLangner Langner
Langner Langner
JAJörg Acker
Jörg Acker
This article presents a comprehensive quantification of the gaseous and dissolved reaction products formed during the etching of Si in HF/HNO3mixtures and provides a revised model of HNO3reduction during the oxidation of Si.

10 November 2019 in Journal of Raman Spectroscopy
Verified
Journal Article
Open access
PDF file
LLLangner Langner
Langner Langner
ARAnja Rietig
Anja Rietig
JAJörg Acker
Jörg Acker
The oxidizing effect of nitric acid in aqueous solutions depends on the concentration of undissociated nitric acid. This makes the concentration of undissociated nitric acid an essential parameter to monitor and control the quality of silicon etching in the industrial manufacturing of solar cells. In the present study, a method known already is extended in such a way that the degree of dissociation of nitric acid can be determined by Raman spectroscopy in HF/HNO3/H2SiF6 acid mixtures over a broad concentration range for the first time and without using an internal or external standard to compensate the typical time‐dependent drift of a Raman spectrometer. The method developed requires the calculation of a peak area ratio from the areas of the unimpeded Raman signals assigned to nitrate (νN − O) at 1,048 cm−1 and to undissociated HNO3 (νN − OH) at 957 cm−1. The correlation between the peak ratio and the degree of dissociation of nitric acid revealed can be described by a simple empirical equation. Using this equation, the degree of dissociation of nitric acid can be determined over a broad concentration range in binary and ternary mixtures of HNO3 with HF and H2SiF6. The impact of the acids HF and H2SiF6 and the total water content in the degree of dissociation of nitric acid is discussed.

5 January 2022 in Physical Chemistry Chemical Physics
Verified
Journal Article
Closed access
PDF file
ARAnja Rietig
Anja Rietig
LLLangner Langner
Langner Langner
JAJörg Acker
Jörg Acker
A comprehensive study of all reaction products formed during the etching of Si in HF/HNO3 and HF/HNO3/H2SiF6 mixtures is presented. Covering a maximum of mixing possibilities, functional relationships to the composition of the etchant are established.