Nickel–manganese–cobalt oxides, with LiNi0.33Mn0.33Co0.33O2 (NMC) as the most prominent compound, are state-of-the-art cathode materials for lithium-ion batteries in electric vehicles. The growing market for electro mobility has led to a growing global demand for Li, Co, Ni, and Mn, making spent lithium-ion batteries a valuable secondary resource. Going forward, energy- and resource-inefficient pyrometallurgical and hydrometallurgical recycling strategies must be avoided. We presented an approach to recover NMC particles from spent lithium-ion battery cathodes while preserving their chemical and morphological properties, with a minimal use of chemicals. The key task was the separation of the cathode coating layer consisting of NMC, an organic binder, and carbon black, from the Al substrate foil. This can be performed in water under strong agitation to support the slow detachment process. However, the contact of the NMC cathode with water leads to a release of Li+ ions and a fast increase in the pH. Unwanted side reactions may occur as the Al substrate foil starts to dissolve and Al(OH)3 precipitates on the NMC. These side reactions are avoided using pH-adjusted solutions with sufficiently high buffer capacities to separate the coating layer from the Al substrate, without precipitations and without degradation of the NMC particles.
17 September 2019 in Physical Chemistry Chemical Physics
This article presents a comprehensive quantification of the gaseous and dissolved reaction products formed during the etching of Si in HF/HNO3mixtures and provides a revised model of HNO3reduction during the oxidation of Si.
22 December 2016 in Journal of Analytical Atomic Spectrometry
The oxidizing effect of nitric acid in aqueous solutions depends on the concentration of undissociated nitric acid. This makes the concentration of undissociated nitric acid an essential parameter to monitor and control the quality of silicon etching in the industrial manufacturing of solar cells. In the present study, a method known already is extended in such a way that the degree of dissociation of nitric acid can be determined by Raman spectroscopy in HF/HNO3/H2SiF6 acid mixtures over a broad concentration range for the first time and without using an internal or external standard to compensate the typical time‐dependent drift of a Raman spectrometer. The method developed requires the calculation of a peak area ratio from the areas of the unimpeded Raman signals assigned to nitrate (νN − O) at 1,048 cm−1 and to undissociated HNO3 (νN − OH) at 957 cm−1. The correlation between the peak ratio and the degree of dissociation of nitric acid revealed can be described by a simple empirical equation. Using this equation, the degree of dissociation of nitric acid can be determined over a broad concentration range in binary and ternary mixtures of HNO3 with HF and H2SiF6. The impact of the acids HF and H2SiF6 and the total water content in the degree of dissociation of nitric acid is discussed.
5 January 2022 in Physical Chemistry Chemical Physics
A comprehensive study of all reaction products formed during the etching of Si in HF/HNO3 and HF/HNO3/H2SiF6 mixtures is presented. Covering a maximum of mixing possibilities, functional relationships to the composition of the etchant are established.