Lin Meng

Dr. Lin Meng

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 November 2021 in International Journal of Aerospace Engineering
Verified
Journal Article
Open access
PDF file
LMLin Meng
Lin Meng
SWShuo Wang
Shuo Wang
YCYe Chen
Ye Chen
YGYang Gao
Yang Gao
FanWing has been taken to the visual field because of its performance combination of fixed-wing aircraft and helicopter. Its flight mode is currently limited mainly by a remote control, while the research of automated flight control is on the rise. The fan wing could offer lift, thrust, and the additional pitch moment for longitudinal control. At the same time, the roll moment and the yaw moment can be generated by the differential rotation of the cross-flow fan to realize the lateral control. It provides the possibility for its emergency flight control when the aerodynamic control becomes inefficient at a low speed. The difficulties in designing the emergency control system in both the longitudinal and lateral controls are analyzed. And it emphasizes the importance of selecting its center of gravity and the emergency control method of longitudinal control in engineering. The simulation results show that as an emergency flight control system, fan wing control is feasible. The study of the fan wing control will provide a reference solution for its further engineering applications.

6 August 2022 in Electronics
Verified
Journal Article
Open access
PDF file
YGYang Gao
Yang Gao
LMLin Meng
Lin Meng
JTJinwu Tong
Jinwu Tong
ZRZhihu Ruan
Zhihu Ruan
JJJia Jia
Jia Jia
This paper presents the design and simulation of a single-chip integrated MEMS accelerometer gyroscope by integrating a Coriolis vibratory ring gyroscope and a differential resonant accelerometer into one single-chip structure, measuring both the acceleration and the angular velocity (or the angle). At the same time, it has the advantages of small volume, low cost, and high precision based on the characteristics of a ring gyroscope and resonant accelerometer. The proposed structure consists of a microring gyroscope and a MEMS resonant accelerometer. Tthe accelerometer is located inside the gyroscope and the two structures are concentric. The operating mechanisms of the ring gyroscope and the resonant accelerometer are first introduced. Then, the whole structure of the proposed single-chip integrated accelerometer gyroscope is presented, and the structural components are introduced in detail. Modal analysis shows the resonant frequencies of upper and lower DETFs in resonant accelerometer are 28,944.8 Hz and 28,948.0 Hz, and the resonant frequencies of the ring gyroscope (n=2) are 15,768.5 Hz and 15,770.3 Hz, respectively. The scale factor of the resonant accelerometer is calculated as 83.5 Hz/g by the analysis of the input–output characteristic. Finally, the thermal analysis fully demonstrates that the single-chip integrated accelerometer gyroscope has excellent immunity to temperature change.

9 June 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
YGYang Gao
Yang Gao
JZJiachao Zhang
Jiachao Zhang
ZRZhihu Ruan
Zhihu Ruan
LMLin Meng
Lin Meng
JJJia Jia
Jia Jia
Free-form microhemispherical shell resonators have the advantages of high quality factor and mass production. The shape of microhemispherical shells created via this process is based on a single mold and is difficult to adjust, which affects the resonant frequency and quality factor. In this paper, a process analysis model is established through in-depth analysis of the process mechanism and flow of the free-forming method. Based on this model, the influence of the designed preforming parameters on the shape, resonant frequency and thermoelastic dissipation of the microhemispherical shell are analyzed in detail, providing theoretical guidance for parameter design. The results show that the depth and the ratio of internal to external pressure of the substrate’s annular groove affect the height and thickness of the microhemispherical shell, and the structural thickness affects the thickness of the microhemispherical shell; these in turn affect the resonant frequency and thermoelastic dissipation of the microhemispherical shell resonator. In addition, the inner diameter of the substrate’s annular groove mainly affects the radius of the support column of the microhemispherical shell, and the influence on the resonant frequency and thermoelastic dissipation of the resonator is relatively low.

1 September 2021 in AIP Advances
Verified
Journal Article
Open access
PDF file
LMLin Meng
Lin Meng
SWShuo Wang
Shuo Wang
YCYe Chen
Ye Chen
YGYang Gao
Yang Gao
FanWing, a concept for embedding a cross-flow fan into a thick wing for lift enhancement and thrust production, is a new kind of aircraft. Since the action position of the fan wing is after the center of gravity, the rotation of the cross-flow fan produces lift, thrust, and an additional pitch-down moment. Although FanWing has achieved great success at the air shows, scientists mainly concentrate on optimizing the fan wing structure to improve the characteristics of the power system and the dynamic performance of FanWing but rarely consider the control system. There is still a lot of work to do on theoretical research and engineering applications. Thus, the present paper will do some research on the control systems, including two control methods: the traditional elevator, aileron, and rudder control method and the fan wing control method. The influence of the additional pitch-down moment is researched. Based on the study of a 3.5 kg FanWing, the proportional integral differential (PID) controllers are designed. The proposed fan wing controller has been compared with the traditional PID one. The simulations show the effectiveness of the proposed fan wing controller in terms of the nonlinear simulation.

17 February 2024 in Aerospace
Verified
Journal Article
Open access
PDF file
CTChengfei Tao
Chengfei Tao
RSRongyue Sun
Rongyue Sun
YWYichen Wang
Yichen Wang
YGYang Gao
Yang Gao
LMLin Meng
Lin Meng
LCLing Chen
Ling Chen
This study experimentally explored the effects of equivalence ratio settings on ethanol fuel combustion oscillations with a laboratory-scale combustor. A contrary flame equivalence ratio adjusting trend was selected to investigate the dynamic characteristics of an ethanol atomization burner. Research findings denote that optimizing the equivalence ratio settings can prevent the occurrence of combustion instability in ethanol burners. In the combustion chamber, the sound pressure amplitude increased from 138 Pa to 171 Pa and eventually dropped to 38 Pa, as the equivalence ratio increased from 0.45 to 0.90. However, the sound pressure amplitude increased from 35 Pa to 199 Pa and eventually dropped to 162 Pa, as the equivalence ratio decreased from 0.90 to 0.45. The oscillation frequency of the ethanol atomization burner presents a migration characteristic; this is mainly due to thermal effects associated with changes in the equivalence ratio that increase/decrease the speed of sound in burnt gases, leading to increased/decreased oscillation frequencies. The trend of the change in flame heat release rate is basically like that of sound pressure, but the time-series signal of the flame heat release rate is different from that of sound pressure. It can be concluded that the reversible change in equivalence ratio will bring significant changes to the amplitude of combustion oscillations. At the same time, the macroscopic morphology of the flame will also undergo significant changes. The flame front length decreased from 25 cm to 18 cm, and the flame frontal angle increased from 23 to 42 degrees when the equivalence ratio increased. A strange phenomenon has been observed, which is that there is also sound pressure fluctuation inside the atomized air pipeline, and it presents a special square waveform. This study explored the equivalence ratio adjusting trends on ethanol combustion instability, which will provide the theoretical basis for the design of ethanol atomization burners.

17 July 2026 in Electronics
Verified
Journal Article
Open access
PDF file
YGYang Gao
Yang Gao
ZHZheng Hu
Zheng Hu
YSYancheng Su
Yancheng Su
LJLiangbao Jiao
Liangbao Jiao
LMLin Meng
Lin Meng
In thermal power plants, accurate detection of torsion faults in tubular belt conveyors is crucial for operational safety. Traditional methods lack efficiency and accuracy, while existing deep learning models struggle with real-time processing demands. This paper introduces an enhanced Dynamic-UNet architecture, incorporating depthwise separable convolutions, a quality-aware gating module, and a simplified decoder structure. Evaluated on a dedicated industrial dataset, our model achieves a 97.89% mean Intersection over Union (mIoU) and a 32.28 Frames Per Second (FPS) inference speed on an NVIDIA RTX 3090, which is 2.72 percentage points higher in accuracy and 2.2× faster in inference than the original UNet, and outperforms mainstream semantic segmentation models. Real-world deployment on a Huawei Atlas DK A2 edge platform with a dynamic Region of Interest (ROI) mechanism further delivers an effective inference speed of 33.46 FPS, fulfilling industrial real-time requirements.